New approach for calculation of peak over pressure and impulse of aluminized explosive charges

ABSTRACT

RDX/HMX-TNT-based aluminized explosive compositions have been investigated to find empirical relations based on heat of explosion (Q) and velocity of detonation (VOD) for calculation of peak over pressure (POP) and impulse (I). Four HMX-TNT-based aluminized compositions have been selected based on calculated values of Q and explosive power. Explosive charges of RDX/HMX-TNT-based aluminized compositions and TNT have been prepared by melt-cast technique for measurement of VOD and air blast. Cylindrical explosive charges with length to diameter ratio of ~ 1 and weight ~ 1.3 kg have been used for measurement of pressure-time profiles at standoff distance of 2–6 m. Similar measurements were also performed for the explosive charges of TNT of weight ~ 11 and 17 kg. Normalized values of Q and VOD² with corresponding values of TNT have been used to compute charge weight for calculation of scaled distance which is termed as normalized scaled distance. Form of empirical relations has been decided from variation of POP and I with normalized scaled distance. Values of constants used in these relations have been determined using regression analysis. Validation of empirical relations has been carried out by comparing calculated and experimental values of POP and I for explosive charges.

KEYWORDS:

• Aluminized explosive compositions
• heat of explosion
• impulse
• peak over pressure
• TNT equivalence
• velocity of detonation

Acknowledgments

The authors would like to express gratitude to members of various teams who had helped for evaluation of detonic and blast parameters through field experiments.

Disclosure statement

No potential conflict of interest was reported by the author(s).