Editorial board

EDITOR-IN-CHIEF

Dr. Christopher DellaCorte
The University of Akron
Timken Engineered Surfaces Laboratory (TESL)
264 Wolf Ledges Parkway, Room 311b
Akron Engineering Research Center (AESC)
Akron, Ohio 44325-0406 
Phone (330) 972-7713
[email protected]

Editorial Director

Rachel Fowler
STLE Headquarters
840 Busse Highway
Park Ridge, IL 60068-2376
Phone (847) 825-5536
Fax (847) 825-1456
[email protected]
www.stle.org

Production Editor

Glenn Ruse Jr.
Taylor & Francis Group, LLC
530 Walnut St., Suite 850
Philadelphia, PA 19106
[email protected]
www.tandfonline.com

Associate Editors

Mihai Arghir - Université de Poitiers, Poitiers, France,  [email protected]
Vasileios Bakolas - Schaeffler Technologies AG & Co. KG, Herzogenaurach, Germany,  [email protected]
Ewa Bardasz - Zual Associates in Lubrication LLC, Mentor, Ohio, [email protected]
Stephen Berkebile - U.S. Army Research Laboratory, Aberdeen Proving Ground, Maryland, [email protected]
Thierry A. Blanchet - Rensselaer Polytechnic Institute, Troy, New York, [email protected]
John A.R. Bomidi - Baker Hughes, The Woodlands, Texas, [email protected]
Benyekba "Ben" Bou-Said - INSA de Lyon, Villeurbanne, France, [email protected]
John Burke - Quaker Houghton, Concord Township, Ohio, [email protected]
Neil Canter - Chemical Solutions, Willow Grove, Pennsylvania, [email protected]
Azzedine Dadouche - National Research Council Canada, Ottawa, Ontario, [email protected]
Michael J. Dube - NASA Engineering and Safety Center, Hampton, Virginia, [email protected]
Michael Dugger - Sandia National Laboratories, Albuquerque, New Mexico, [email protected]
Kai Feng - Hunan University, Hunan Sheng, China,  [email protected]
Kanao Fukuda - Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia, [email protected]
Benjamin J. Gould - The Chemours Company, Newark, Delaware, [email protected]
Aaron Greco - Argonne National Lab, Argonne, Illinois, [email protected]
Christian Greiner - Karlsruhe Institute of Technology, Karlsruhe, Germany [email protected]
Hannes Grillenberger - Schaeffler Technologies AG & Co., KG, Herzogenaurach, Germany, [email protected]
Xue Han - Cummins, Inc., Columbus, Indiana,  [email protected]
C. Fred Higgs, III - Rice University, Houston, Texas, [email protected]
S. Adam Howard - NASA Glenn Research Center, Cleveland, Ohio, [email protected]
Yeau-Ren Jeng - National Cheng Kung University, Chia-Yi, Taiwan, [email protected]
Amir Kadiric - Imperial College, London, United Kingdom, [email protected]
Satish Kailas - Indian Institute of Science, Bangalore, India, [email protected]
Young Sup Kang - SKF USA Inc., Plymouth, Michigan, [email protected]
Khashayar Khanlari - Université de Sherbrooke, Quebec, Canada, [email protected]
Harman Khare - Gonzaga University, Spokane, Washington, [email protected]
Oliver Koch - Technical University Kaiserlautern, Kaiserlautern, Germany, [email protected]
Brandon Krick - Florida State University, Tallahassee, Florida, [email protected]
Alan O. Lebeck - Mechanical Seal Technology, Albuquerque, New Mexico, [email protected]
Peter M. Lee- Southwest Research Institute, San Antonio, Texas [email protected]
Nikhil Londhe- The Timken Company, Gainesville, Florida [email protected]
Babak Lotfi- ExxonMobil Chemical Company, Baytown, Texas [email protected]
Piet Lugt - SKF Nieuwegein, the Netherlands, [email protected]
Filippo Mangolini - University of Texas at Austin, Austin, TX, [email protected]
Martin Marinack, Jr. - Arconic, Pittsburgh, Pennsylvania, [email protected]
Ashlie Martini - University of California, Merced, California, [email protected]
Masabumi Masuko - Tokyo Institute of Technology, Tokyo, Japan, [email protected]
Angelo Mazzu - University of Brescia, Brescia, Italy,  [email protected]
Daniel Merk - Schaeffler Technologies AG Co. KG, Schweinfurt, Germany,  [email protected]
Pradeep L. Menezes - University of Nevada, Reno, Reno, Nevada,  [email protected]
Hamidreza Mohseni - Pratt & Whitney, Hartford, Connecticut,  [email protected]
Guillermo Morales Espejel - SKF Research & Technology Development, Nieuwegein, The Netherlands, [email protected]
Daniel Nelias - LaMCoS INSA De Lyon, Villeurbanne, France, [email protected]
Jack Poley - Condition Monitoring International (CMI), Miami, Florida, [email protected]
Martin Priest - University of Bradford, Bradford, United Kingdom, [email protected]
Bart Raeymaekers- Virginia Tech, Blacksburg, VA [email protected]
Keun Ryu - Hanyang University, Ansan, Gyeonggi-Do, South Korea, [email protected]
Luis A. San Andres - Texas A&M University, College Station, Texas, [email protected]
Thomas Scharf - University of North Texas, Denton, Texas, [email protected]
Steve Shaffer - Shaffer Tribology Consulting, San Jose, California, [email protected]
Steven Thrush - U.S. Army DEVCOM GVSC, Royal Oak, Michigan, [email protected]
Ariane Viat - Constellium, Saint-Égrève, France, ariane.viat@constellium
Fabrice Ville - LaMCoS INSA De Lyon, Villeurbanne, France, [email protected]
Kathryn J. Wahl - Naval Research Laboratory, Washington, DC, [email protected]
Elaine S. Yamaguchi - El Cerrito, California, [email protected]
Jing Yang - Apple, Inc., Austin, Texas, [email protected]
Qi Yang - National Research Council Canada, Ottawa, Ontario, Canada,  [email protected]
Nicola Zani - University of Brescia, Brescia, Italy, [email protected]