Abstract
Reactors produce noise that negatively impacts the environment during their operation. This study focused on vibration and noise reduction in shunt oil reactors through an enhanced design, aiming to mitigate these environmental consequences. Additionally, the precision of measuring vibroacoustic characteristics was enhanced by employing the finite element method. This study utilized the 110–750 kV reactor, POM-60000/525-У1. To minimize noise and vibrations from the active part to the tank, the rubber gaskets’ thicknesses, dimensions, and placements were carefully chosen, considering the magnetic system’s design specifics and pressing forces within the reactor frame. The reactor’s design underwent improvements through modeling and optimization. In the revised design, the number of radiators in the cooling system on both sides and the stiffeners on the reactor tank’s walls were increased, while the reactor’s overall dimensions were preserved. The isosurfaces derived from vibroacoustic testing on the reactor tank model facilitated the processing and visualization of results, thereby validating the model’s accuracy and effectiveness. The average background noise levels of the enhanced reactor were significantly lowered, with the noise difference between the reactor and its surroundings being nearly double that of its existing counterpart. Since noise from wall vibrations and the cooling system impacts reactor lifecycles, reducing these vibrations is crucial for extending the lifespan of the improved reactor.
REVIEWING EDITOR:
Acknowledgments
The study was conducted in “TRENCO R&D” LLP, 010000, Astana city, Kabanbay Batyr Ave., Building 53/1, Block 53 (S4).
Disclosure statement
No potential conflict of interest was reported by the author(s).
Notes
Additional information
Funding
Notes on contributors
Tazhibayev Adіlbek
Tazhibayev Adilbek has worked as a Chief Specialist at a transformer plant for more than ten years. He is an author and a leader of a team that developed a line of 35, 110, 220, and 500 kV electrical equipment. These pieces of equipment are manufactured and operated in several countries. During development, modern calculation methods were used and new scientific results and patents were obtained to improve the design and quality of these equipment.
Utepbergenov Irbulat
Utepbergenov Irbulat Doctor of Technical Sciences, Professor, Head of Laboratory of Cyber-physical Systems and Smart technologies Almaty University of Power Engineering and Telecommunications named after Gumarbek Daukeyev. Research interests: ACS, Information technology in education, telecommunications, control and transport.
Amіtov Yernar
Amitov Yernar received his PhD from Tomsk Polytechnic University in 2018. His research interests include the study of the electrical properties of composite polymer dielectrics and the physics of dielectrics. Currently, he works as the head of the Department of “Electrical Engineering” of the Almaty University of Power Engineering and Telecommunications named after Gumarbek Daukeyev.
Ateyev Dauirbek
Ateyev Dauirbek received a bachelor’s degree in electrical power engineering from Almaty University of Energy and Communications in 2015. His research interests include relay protection and automation, power supply of industrial enterprises. Currently, he works as Deputy Chairman of the Board of Asia Trafo LLP, a plant producing transformers for voltages of 110, 220 and 500 kV with a capacity of up to 400 MVA.