References
- Paul S, Ghosh DN. Model study of mixing and mass transfer rates of slag-metal in top and bottom blown converters. Metall Mater Trans B. 1986;17:461–469.
- Choudhary SK, Ajmani SK. Evaluation of bottom stirring system in BOF steelmaking vessel using cold model study and thermodynamic analysis. ISIJ Int. 2006;46:1171–1176.
- Kawabe Y, Uddin MA, Kato Y, et al. Correlation between liquid/liquid and gas/liquid mass transfers in a top/bottom blowing converter. ISIJ Int. 2017;57:296–303.
- Yao L, Zhu R, Dong K, et al. Influence of the non-uniform bottom blowing gas supply mode on the dynamic conditions of molten pool during the converter steelmaking process. Ironmak Steelmak. 2021;48:180–190.
- Martín M, Rendueles M, Díaz M. Global and local mixing determinations for steel converter analysis. Chem Eng Sci. 2005;60:5781–5791.
- Zhou X, Liu Y, Ni P, et al. Toward the bath flow interaction of a 250t combined top and bottom blowing converter based on a mathematical modeling. Steel Res Int. 2020;92:334.
- Roth C, Peter M, Schindler M, et al. Cold model investigations into the effects of bottom blowing in metallurgical reactors. Steel Res Int. 1995;66:325–330.
- Stišovic T, Koch K. Bottom blowing investigations on a cold model reactor to optimise mixing behaviour in metallurgical processes. Steel Res Int. 2002;73:373–377.
- Li M, Li L, Li Q, et al. Modeling of mixing behavior in a combined blowing steelmaking converter with a filter-based Euler–Lagrange model. JOM. 2018;70:2051–2058.
- Luomala MJ, Fabritius TMJ, Härkki JJ. The effect of bottom nozzle configuration on the bath behaviour in the BOF. ISIJ Int. 2004;44:809–816.
- Chu K-Y, Chen H-H, Lai P-H, et al. The effects of bottom blowing gas flow rate distribution during the steelmaking converter process on mixing efficiency. Metall Mater Trans B. 2016;47:948–962.
- Li Y, Lou WT, Zhu MY. Numerical simulation of gas and liquid flow in steelmaking converter with top and bottom combined blowing. Ironmak Steelmak. 2013;40:505–514.
- Wu WJ, Yu HX, Wang XH, et al. Optimization on bottom blowing system of a 210 t converter. JIron Steel Res, Int. 2015;22:80–86.
- Zhou X, Ersson M, Zhong L, et al. Numerical simulations of the kinetic energy transfer in the bath of a BOF converter. Metall Mater Trans B. 2016;47:434–445.
- Singh V, Kumar J, Bhanu C, et al. Optimisation of the bottom tuyeres configuration for the BOF vessel using physical and mathematical modelling. ISIJ Int. 2007;47:1605–1612.
- Yang L-b, Liu L, Jiao X-l, et al. Study and application of bottom blowing technique of combined blowing converter. J Iron Steel Res Int. 2014;21:41–45.
- Hirt CW, Nichols BD. Volume of fluid (VOF) method for the dynamics of free boundaries. J Comput Phys. 1981;39:201–225.
- Launder BE, Spalding DB. Mathematical models of turbulence. 1st ed. London: Academic Press; 1972. p. 124.
- Ansys 15.0 Manual, ANSYS, Inc., Canonsburg, 2013.
- Clift R, Grace JR, Weber ME. Bubbles, drops, and particles. New York: Academic Press; 1978.
- Lai Z, Xie Z, Zhong L. Influence of bottom tuyere configuration on bath stirring in a top and bottom combined blown converter. ISIJ Int. 2008;48:793–798.
- Li W, Zhu R, Dong K, et al. Physical simulation and industrial testing of bottom-blown O2-CaO converter for steelmaking process. Metal Mater Trans B. 2020;51:1060–1069.