Publication Cover
Canadian Metallurgical Quarterly
The Canadian Journal of Metallurgy and Materials Science
Volume 63, 2024 - Issue 2
56
Views
0
CrossRef citations to date
0
Altmetric
Materials Corrosion and Degradation

Effects of load and speed on high-temperature tribological performance of electrodeposited hard Cr coating in trivalent-Cr bath

, &
Pages 488-497 | Received 25 Feb 2023, Accepted 16 Apr 2023, Published online: 11 May 2023

References

  • Liu Q-S, Liu X-B, Wang G, et al. Effect of Cu content on microstructure evolution and tribological behaviors of Ni60 composite coatings on 45# steel by laser cladding. Opt Laser Technol. 2022;156:108549.
  • Xu DH, Ni SY, Bu YQ, et al. Electrodeposition of high-quality Cr coatings with solid solution Al from Cr2+ electrolyte. Surf Coat Technol. 2023;452:129121.
  • Mukhtar F, Qayyum F, Anjum Z, et al. Effect of chrome plating and varying hardness on the fretting fatigue life of AISI D2 components. Wear. 2019;418–419:215–225.
  • Prabhakar JM, Varanasi RS, Silva CC, et al. Chromium coatings from trivalent chromium plating baths: characterization and cathodic delamination behaviour. Corros Sci. 2021;187:109525.
  • Molodkina EB, Ehrenburg MR, Broekmann P, et al. Electrodeposition of chromium on single-crystal electrodes from solutions of Cr(II) and Cr(III) salts in ionic liquids. J Electroanal Chem. 2020;860:113892.
  • Armando E-G, Carlos F, René A-L, et al. Morphological insights associated to instantaneous nucleation and growth in Cr(III) electrodeposition on nickel in aqueous media. J Mater Res Technol. 2021;15:7004–7011.
  • Büker L, Böttcher R, Leimbach M, et al. Influence of carboxylic acids on the performance of trivalent chromium electrolytes for the deposition of functional coatings. Electrochim Acta. 2022;411:140054.
  • Rahman A, Chowdhury MA, Hossain N, et al. A review of the tribological behavior of electrodeposited cobalt (Co) based composite coatings. Composites Part C: Open Access. 2022;9:100307.
  • Ali R, Safavi MS, Babaei F, et al. Electrodeposited Ni–Fe–Cr2O3 nanocomposite coatings: A survey of influences of Cr2O3 nanoparticles loadings in the electrolyte. J Alloys Compd. 2020;822:153725.
  • Mahdavi S, Allahkaram SR. Composition,: characteristics and tribological behavior of Cr, Co–Cr and Co–Cr/TiO2 nano-composite coatings electrodeposited from trivalent chromium based baths. J Alloys Compd. 2015;635:150–157.
  • Bikulčius G, Češunienė A, Selskienė A, et al. Dry sliding tribological behavior of Cr coatings electrodeposited in trivalent chromium sulphate baths. Surf Coat Technol. 2017;315:130–138.
  • Zhu WX, Xu YS, Kong DJ. Microstructure and tribological performance of electrodeposited Cr coating with trivalent-chromium electrolyte. JOM. 2022;74:4575–4582.
  • Cao QZ, Li F, Chen HY, et al. Wear behavior of laser cladded WC-reinforced Ni-based coatings under low temperature. Tribol Int. 2022;176:107939.
  • Protsenko VS, Danilov FI, Gordiienko VO, et al. Electrodeposition of hard nanocrystalline chrome from aqueous sulfate trivalent chromium bath. Thin Solid Films. 2011;520(1):380–383.
  • Kong WC, Yu Z, Hu J. Effect of carburizing treatment on microstructural,: mechanical and tribological performances of Cr doped DLC coating deposited on Ti6Al4V alloy. Ceram Int. 2021;47:34425–34436.
  • Sun ZP, Zhang XY, Li XZ, et al. Study on the wear behavior of CoCrFeNiAl1.0 high entropy alloy at high temperature. Mater Lett. 2022;324:132726.
  • Zhu Z-X, Liu X-B, Liu Y-F, et al. Effects of Cu/Si on the microstructure and tribological properties of FeCoCrNi high entropy alloy coating by laser cladding. Wear. 2023;512–513:204533.
  • Liang F, Meng A, Sun YX, et al. A novel wear-resistant Ni-based superalloy via high Cr-induced subsurface nanotwins and heterogeneous composite glaze layer at elevated temperatures. Tribol Int. 2023;183:108383.
  • Zhao P, Li J, Zhang Y, et al. Wear and high-temperature oxidation resistances of AlNbTaZrx high-entropy alloys coatings fabricated on Ti6Al4V by laser cladding. J Alloys Compd. 2021;862:158405.
  • Pan SH, Jin KY, Wang TL, et al. Metal matrix nanocomposites in tribology: manufacturing,: performance, and mechanisms. Friction. 2022;10:1596–1634.
  • Zhang Z, Li Z, Pan S, et al. Enhanced strength and high-temperature wear resistance of Ti6Al4V alloy fabricated by laser solid forming. J Manfct Sci Eng. 2022;144(11):111011.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.