References
- Heidarzadeh A, Mironov S, Kaibyshev R, et al. Friction stir welding/processing of metals and alloys: a comprehensive review on microstructural evolution. Prog Mater Sci. 2021;117:100752.
- Kim S, Lee CG, Kim S-J. Fatigue crack propagation behavior of friction stir welded 5083-H32 and 6061-T651 aluminum alloys. Mater Sci Eng A. 2008;478(1–2):56–64.
- Sinka V. The present and future prospects of friction stir welding in aeronautics. Acta Metall Slovaca. 2014;20(3):287–294.
- Wang X, Wang K, Shen Y, et al. Comparison of fatigue property between friction stir and TIG welds. J Univ Sci Technol Beijing Miner Metall Mat. 2008;15(3):280–284.
- Cavaliere P, De Santis A, Panella F, et al. Effect of welding parameters on mechanical and microstructural properties of dissimilar AA6082–AA2024 joints produced by friction stir welding. Mater Des. 2009;30(3):609–616.
- Eyvazian A, Hamouda A, Tarlochan F, et al. Simulation and experimental study of underwater dissimilar friction-stir welding between aluminium and steel. J Mat Res Technol. 2020;9(3):3767–3781.
- Meschut G, Merklein M, Brosius A, et al. Review on mechanical joining by plastic deformation. J Adv Joi Proc. 2022;5:100113.
- Jacquin D, Guillemot G. A review of microstructural changes occurring during FSW in aluminium alloys and their modelling. J Mater Process Technol. 2021;288:116706.
- Taban E, Kaluc E. Microstructural and mechanical properties of double-sided MIG, TIG and friction stir welded 5083-H321 aluminium alloy. Kov Mater. 2006;44(1):25.
- Zhou C, Yang X, Luan G. Fatigue properties of friction stir welds in Al 5083 alloy. Scr Mater. 2005;53(10):1187–1191.
- Hirata T, Oguri T, Hagino H, et al. Influence of friction stir welding parameters on grain size and formability in 5083 aluminum alloy. Mater Sci Eng A. 2007;456(1–2):344–349.
- Lombard H, Hattingh DG, Steuwer A, et al. Optimising FSW process parameters to minimise defects and maximise fatigue life in 5083-H321 aluminium alloy. Eng Fract Mech. 2008;75(3–4):341–354.
- Maggiolino S, Schmid C. Corrosion resistance in FSW and in MIG welding techniques of AA6XXX. J Mater Process Technol. 2008;197(1–3):237–240.
- Balasubramanian V. Relationship between base metal properties and friction stir welding process parameters. Mater Sci Eng A. 2008;480(1–2):397–403.
- Park S-H, Kim J-S, Han M-S, et al. Corrosion and optimum corrosion protection potential of friction stir welded 5083-O Al alloy for leisure ship. Trans Nonferr Metal Soc China. 2009;19(4):898–903.
- Lombard H, Hattingh DG, Steuwer A, et al. Effect of process parameters on the residual stresses in AA5083-H321 friction stir welds. Mater Sci Eng A. 2009;501(1–2):119–124.
- Zhao J, Jiang F, Jian H, et al. Comparative investigation of tungsten inert gas and friction stir welding characteristics of Al–Mg–Sc alloy plates. Mater Des. 2010;31(1):306–311.
- Ghosh M, Kumar K, Kailas SV, et al. Optimization of friction stir welding parameters for dissimilar aluminum alloys. Mater Des. 2010;31(6):3033–3037.
- Bist A, Saini JS, Sharma B. A review of tool wear prediction during friction stir welding of aluminium matrix composite. Trans Nonferr Metal Soc China. 2016;26(8):2003–2018.
- Sert A, Çakir FH. Improvement of tool life of a commercial drill bits by cryogenic treatment while machining widmanstatten Ti-6Al-4 V. Surf Topogr Metrol Prop. 2021. DOI:10.1088/2051-672X/ac3a9c
- Taheri H, Kilpatrick M, Norvalls M, et al. Investigation of nondestructive testing methods for friction stir welding. Metals (Basel). 2019;9(6):624.
- Safeen MW, Russo Spena P. Main issues in quality of friction stir welding joints of aluminum alloy and steel sheets. Metals (Basel). 2019;9(5):610.
- Kishta EE, Darras B. Experimental investigation of underwater friction-stir welding of 5083 marine-grade aluminum alloy. P I Mech Eng B-J Eng. 2016;230(3):458–465.
- Abdollahzadeh A, Bagheri B, Abbasi M, et al. A modified version of friction stir welding process of aluminum alloys: analyzing the thermal treatment and wear behavior. P I Mech Eng L-J Mat. 2021;235(10):2291–2309.