Heat Transfer Optimization Studies of Semi-Spherical Protrusions on a Concave Surface during Jet Impingement

References

• S. W. Chang, S. F. Chiou, and S. F. Chang, “Heat transfer of impinging jet array over concave dimpled surface with applications to cooling of electronic chipsets,” Exp. Therm. Fluid Sci., vol. 31, no. 7, pp. 625–640, 2007. DOI: 10.1016/j.expthermflusci.2006.06.008.
   Web of Science ®Google Scholar
• W. Siddique, N. A. Khan, and I. Haq, “Analysis of numerical results for two-pass trapezoidal channel with different cooling configurations of trailing edge: the effects of dimples,” Appl. Therm. Eng., vol. 89, pp. 763–771, 2015. DOI: 10.1016/j.applthermaleng.2015.06.067.
   Web of Science ®Google Scholar
• S. Xie, Z. Liang, L. Zhang, and Y. Wang, “A numerical study on heat transfer enhancement and two flow structure in enhanced tube with cross ellipsoidal dimples,” Int. J. Heat Mass Transf., vol. 125, pp. 434–444, 2018. DOI: 10.1016/j.ijheatmasstransfer.2018.04.106.
   Web of Science ®Google Scholar
• W. Du, L. Luo, S. Wang, and X. Zhang, “Flow structure and heat transfer characteristics in a 90-deg turned pin fined duct with different dimples/protrusion depths,” Appl. Therm. Eng, vol. 146, pp. 826–842, 2019. DOI: 10.1016/j.applthermaleng.2018.10.052.
   Web of Science ®Google Scholar
• Y. Xie, Y. Rao, W. Li, and J. Qin, “Experiments and stress-blended eddy simulations of turbulent flow over edge-rounded dimples,” Int. J. Therm. Sci., vol. 154, pp. 106380, 2020. DOI: 10.1016/j.ijthermalsci.2020.106380.
   Web of Science ®Google Scholar
• K. Matsubara, H. Ohta, and T. Miura, “Entrance region heat transfer in a channel with a ribbed wall,” J. Heat Transf., vol. 138, no. 12, pp. 122001, Dec. 2016. DOI: 10.1115/1.4034052.
   Web of Science ®Google Scholar
• F. Zhang, X. Wang, and J. Li, “Flow and heat transfer characteristics in rectangular channels using combination of convex-dimples with grooves,” Appl. Therm. Eng., vol. 113, pp. 926–936, 2017. DOI: 10.1016/j.applthermaleng.2016.11.047.
   Web of Science ®Google Scholar
• J. Liu, S. Hussain, J. Wang, L. Wang, G. Xie, and B. Sundén, “Heat transfer enhancement and turbulent flow in a high aspect ratio channel (4:1) with ribs of various truncation types and arrangements,” Int. J. Therm. Sci., vol. 123, pp. 99–116, 2018. DOI: 10.1016/j.ijthermalsci.2017.09.013.
   Web of Science ®Google Scholar
• S. W. Chang, K. F. Chiang, T. L. Yang, and C. C. Huang, “Heat transfer and pressure drop in dimpled fin channels,” Exp. Therm. Fluid Sci., vol. 33, no. 1, pp. 23–40, 2008. DOI: 10.1016/j.expthermflusci.2008.06.013.
   Web of Science ®Google Scholar
• Y. Chen, Y. T. Chew, and B. C. Khoo, “Heat transfer and flow structure on periodically dimple-protrusion patterned walls in turbulent channel flow,” Int. J. Heat Mass Transf., vol. 78, pp. 871–882, 2014. DOI: 10.1016/j.ijheatmasstransfer.2014.07.036.
   Web of Science ®Google Scholar
• Y. Xie, H. Qu, and D. Zhang, “Numerical investigation of flow and heat transfer in rectangular channel with teardrop dimple/protrusion,” Int. J. Heat Mass Transf., vol. 84, pp. 486–496, May 2015. DOI: 10.1016/j.ijheatmasstransfer.2015.01.055.
   Web of Science ®Google Scholar
• Z. Shen, Y. Xie, and D. Zhang, “Experimental and numerical study on heat transfer in trailing edge cooling passages with dimples/protrusions under the effect of side wall slot ejection,” Int. J. Heat Mass Transf., vol. 92, pp. 1218–1235, 2016. DOI: 10.1016/j.ijheatmasstransfer.2015.09.042.
   Web of Science ®Google Scholar
• Y. Xie, D. Shi, and Z. Shen, “Experimental and numerical investigation of heat transfer and friction performance for turbine blade tip cap with combined pin-fin-dimple/protrusion structure,” Int. J. Heat Mass Transf., vol. 104, pp. 1120–1134, 2017. DOI: 10.1016/j.ijheatmasstransfer.2016.09.032.
   Web of Science ®Google Scholar
• P. Singh, J. Pandit, and S. V. Ekkad, “Characterization of heat transfer enhancement and frictional loses in a two-pas square duct featuring unique combination of rib turbulators and cylindrical dimples,” Int. J. Heat Mass Transf., vol. 106, pp. 629–647, 2017. DOI: 10.1016/j.ijheatmasstransfer.2016.09.037.
   Web of Science ®Google Scholar
• S. Xie, Z. Liang, L. Zhang, Y. Wang, H. Ding, and J. Zhang, “Numerical investigation on heat transfer performance and flow characteristics in enhanced tube with dimples and protrusions,” Int. J. Heat Mass Transf., vol. 122, pp. 602–613, 2018. DOI: 10.1016/j.ijheatmasstransfer.2018.01.106.
   Web of Science ®Google Scholar
• J. Liu, Y. Song, G. Xie, and B. Sunden, “Numerical modeling flow and heat transfer in dimpled cooling channels with secondary hemispherical protrusions,” Energy, vol. 79, pp. 1–19, 2015. DOI: 10.1016/j.energy.2014.05.075.
   Web of Science ®Google Scholar
• H. N. Jang, J. S. Park, and J. S. Kwak, “Experimental study on heat transfer characteristics in a ribbed channel with dimples, semi-spherical protrusions, or oval protrusions,” Appl. Therm. Eng., vol. 131, pp. 734–742, 2018. DOI: 10.1016/j.applthermaleng.2017.12.030.
   Web of Science ®Google Scholar
• M. E. Taslim, L. Setayeshgar, and S. D. Spring, “An experimental investigation of advanced leading edge impingement cooling concepts,” J. Turbomach, vol. 123, no. 1, pp. 147–153, 2001. DOI: 10.1115/1.1331537.
   Web of Science ®Google Scholar
• A. Ravanji and M. R. Zargarabadi, “Effects of elliptical pin-fins on heat transfer characteristics of a single impinging jet on a concave surface,” Int. J. Heat Mass Transf., vol. 152, pp. 119532, May 2020. DOI: 10.1016/j.ijheatmasstransfer.2020.119532.
   Web of Science ®Google Scholar
• A. Singh, C. Balaji, and B. Prasad, “The effect of position of protrusion on slot jet impingement cooling over a concave surface,” HFF, vol. 31, no. 1, pp. 1–25, 2021. DOI: 10.1108/HFF-01-2020-0053.
   Web of Science ®Google Scholar
• L. Luo, W. Du, S. Wang, L. Wang, B. Sundén, and X. Zhang, “Multi-objective optimization of a solar receiver considering both the dimple/protrusion depth and the delta-winglet vortex generators,” Energy, vol. 137, pp. 1–19, 2017. DOI: 10.1016/j.energy.2017.07.001.
   Web of Science ®Google Scholar
• P. Li, Y. Luo, D. Zhang, and Y. Xie, “Flow and heat transfer characteristics and optimization study on the water-cooled microchannel heat sinks with dimple and pin-fin,” Int. J. Heat Mass Transf., vol. 119, pp. 152–162, 2018. DOI: 10.1016/j.ijheatmasstransfer.2017.11.112.
   Web of Science ®Google Scholar
• R. Nadda, R. Kumar, A. Kumar, and R. Maithani, “Optimization of single arc protrusion ribs parameters in solar air heater with impinging air jets based upon PSI approach,” Therm. Sci. Eng. Prog., vol. 7, pp. 146–154, 2018. DOI: 10.1016/j.tsep.2018.05.008.
   Google Scholar
• A. Afzal, H. Chung, K. Muralidhar, and H. H. Cho, “Neural-network-assisted optimization of rectangular channels with intersecting ribs for enhanced thermal performance,” Heat Transf. Eng., vol. 41, no. 18, pp. 1609–1625, 2020. DOI: 10.1080/01457632.2019.1661693.
   Web of Science ®Google Scholar
• A. Samad, K.-D. Lee and K.-Y. Kim, “Shape optimization of a dimpled channel to enhance heat transfer using a weighted-average surrogate model,” Heat Transf. Eng., vol. 31, no. 13, pp. 1114–1124, 2010. DOI: 10.1080/01457631003640453.
   Web of Science ®Google Scholar
• K. M. Kim, B. S. Kim, D. H. Lee, H. Moon, and H. H. Cho, “Optimal design of transverse ribs in tubes for thermal performance enhancement,” Energy, vol. 35, no. 6, pp. 2400–2406, 2010. DOI: 10.1016/j.energy.2010.02.020.
   Web of Science ®Google Scholar
• K. M. Kim, H. Moon, J. S. Park, and H. H. Cho, “Optimal design of impinging jets in an impingement/effusion cooling system,” Energy, vol. 66, pp. 839–848, 2014. DOI: 10.1016/j.energy.2013.12.024.
   Web of Science ®Google Scholar
• S. W. Chang, K. F. Chiang, and T. C. Chou, “Heat transfer and pressure drop in hexagonal ducts with surface dimples,” Exp. Therm. Fluid Sci., vol. 34, no. 8, pp. 1172–1181, 2010. DOI: 10.1016/j.expthermflusci.2010.04.006.
   Web of Science ®Google Scholar
• L. Luo, C. Wang, L. Wang, B. A. Sunden, and S. Wang, “A numerical investigation of dimple effects on internal heat transfer enhancement of a double wall cooling structure with jet impingement,” HFF, vol. 26, no. 7, pp. 2175–2197, 2016. DOI: 10.1108/HFF-02-2015-0081.
   Web of Science ®Google Scholar
• L. Luo, W. Du, S. Wang, W. Wu, and X. Zhang, “Multi-objective optimization of the dimple/protrusion channel with pin fins for heat transfer enhancement,” HFF, vol. 29, no. 2, pp. 790–813, 2019. DOI: 10.1108/HFF-05-2018-0194.
   Web of Science ®Google Scholar
• J. Liu, G. Xie, B. A. Sunden, L. Wang, and M. Andersson, “Enhancement of heat transfer in a square channel by roughened surfaces in rib-elements and turbulent flow manipulation,” HFF, vol. 27, no. 7, pp. 1571–1595, 2017. DOI: 10.1108/HFF-03-2016-0120.
   Web of Science ®Google Scholar
• Z. Shen, Q. Jing, Y. Xie, and D. Zhang, “Thermal performance of miniscale heat sink with jet impingement and dimple/protrusion structure,” J. Heat Transf., vol. 139, no. 5, pp. 052202, May 2017. DOI: 10.1115/1.4036035.
   Web of Science ®Google Scholar
• C. Silva, D. Park, E. Marotta, and L. Fletcher, “Optimization of fin performance in a laminar channel flow through dimpled surfaces,” J. Heat Transf., vol. 131, no. 2, pp. 021702, Feb. 2009. DOI: 10.1115/1.2994712.
   Web of Science ®Google Scholar
• Z. Shen, Y. Xie, and D. Zhang, “Numerical predictions on fluid flow and heat transfer in U-shaped channel with the combination of ribs, dimples and protrusions under rotational effects,” Int. J. Heat Mass Transf., vol. 80, pp. 494–512, 2015. DOI: 10.1016/j.ijheatmasstransfer.2014.09.057.
   Web of Science ®Google Scholar
• A. Hadipour and M. R. Zargarabadi, “Heat transfer and flow characteristics of impinging jet on a concave surface at small nozzle to surface distance,” App. Therm. Eng., vol. 138, pp. 534–541, 2018. DOI: 10.1016/j.applthermaleng.2018.04.086.
   Web of Science ®Google Scholar
• B. D. Shaw, Uncertainty Analysis of Experimental Data with R. Boca Raton, FL, USA: CRC Press, 2017.
   Google Scholar