Thermoelastic response of multilayer cylinders: The direct integration and single-solid approach

References

• Y. Tokovyy and C.-C. Ma, “Elastic analysis of inhomogeneous solids: history and development in brief,” J. Mech., vol. 35, no. 5, pp. 613–626, 2019. DOI: 10.1017/jmech.2018.57.
   Web of Science ®Google Scholar
• G. A. Maugin, Material Inhomogeneities in Elasticity. London: Chapman and Hall, 1993.
   Google Scholar
• K. M. Liew, Z. Z. Pan and L. W. Zhang, “An overview of layerwise theories for composite laminates and structures: development, numerical implementation and application,” Compos. Struct., vol. 216, pp. 240–259, 2019. DOI: 10.1016/j.compstruct.2019.02.074.
   Web of Science ®Google Scholar
• X. Zhang et al., “Progress on the layer-by-layer assembly of multilayered polymer composites: strategy, structural control and applications,” Prog. Polym. Sci., vol. 89, pp. 76–107, 2018. DOI: 10.1016/j.progpolymsci.2018.10.002.
   Web of Science ®Google Scholar
• K. Tian, D. Hu, Q. Wei, Q. Fu, and H. Deng, “Recent progress on multifunctional electromagnetic interference shielding polymer composites,” J. Mater. Sci. Technol., vol. 134, pp. 106–131, 2023. DOI: 10.1016/j.jmst.2022.06.031.
   Web of Science ®Google Scholar
• Y. Wang, J. Chen, Y. Li, Y. Niu, Q. Wang, and H. Wang, “Multilayered hierarchical polymer composites for high energy density capacitors,” J. Mater. Chem. A, vol. 7, no. 7, pp. 2965–2980, 2019. DOI: 10.1039/C8TA11392K.
   Web of Science ®Google Scholar
• S. Wu, P. Sikdar, and G. S. Bhat, “Recent progress in developing ballistic and anti-impact materials: nanotechnology and main approaches,” Defence Technol., vol. 21, pp. 33–61, 2023. DOI: 10.1016/j.dt.2022.06.007.
   Web of Science ®Google Scholar
• Q. Fu et al., “Micro/nano multiscale reinforcing strategies toward extreme high-temperature applications: take carbon/carbon composites and their coatings as the examples,” J. Mater. Sci. Technol., vol. 96, pp. 31–68, 2022. DOI: 10.1016/j.jmst.2021.03.076.
   Web of Science ®Google Scholar
• P. Sebestianiuk, D. Perkowski, and R. Kulchytsky-Zhyhailo, “The maximum tensile stress in a microperiodic composite half space with slant layering under frictional contact on its surface,” J. Math. Sci., vol. 263, no. 1, pp. 120–128, 2022. DOI: 10.1007/s10958-022-05911-y.
   Google Scholar
• P. Sebestianiuk, D. Perkowski, and R. Kulchytsky-Zhyhailo, “On stress analysis of load for microperiodic composite half-plane with slant lamination,” Meccanica, vol. 54, no. 3, pp. 573–593, 2019. DOI: 10.1007/s11012-019-00970-z.
   Web of Science ®Google Scholar
• L.-L. Ke and Y.-S. Wang, “A linear multi-layer model and its applications in fracture and contact mechanics of elastic functionally graded materials,” in Functionally Graded Materials, N. J. Reynolds, Ed. New York: Nova Science Publishers, 2012, pp. 1–92.
   Google Scholar
• L. Y. Bahar and R. B. Hetnarski, “Coupled thermoelasticity of a layered medium,” J. Therm. Stresses, vol. 3, no. 1, pp. 141–152, 1980. DOI: 10.1080/01495738008926958.
   Web of Science ®Google Scholar
• L. Lei, J. Zhou, W. Xu, G. Long, B. Xiao, and G. Xu, “A boundary-element analysis of crack problems in multilayered elastic media: a review,” Mathematics, vol. 11, no. 19, pp. 4125, 2023. DOI: 10.3390/math11194125.
   Web of Science ®Google Scholar
• X. Wang and L. J. Sudak, “Three-dimensional analysis of multi-layered functionally graded anisotropic cylindrical panel under thermomechanical loading,” Mech. Mater., vol. 40, no. 4–5, pp. 235–254, 2008. DOI: 10.1016/j.mechmat.2007.06.008.
   Web of Science ®Google Scholar
• L. A. Pipes, “Matrix analysis of heat transfer problems,” J. Franklin Inst., vol. 263, no. 3, pp. 195–206, 1957. DOI: 10.1016/0016-0032(57)90927-4.
   Google Scholar
• S. J. Singh, “Static deformation of a multilayered half-space by internal sources,” J. Geophys. Res, vol. 75, no. 17, pp. 3257–3263, 1970. DOI: 10.1029/JB075i017p03257.
   Google Scholar
• A. P. Peirce and E. Siebrits, “The scaled flexibility matrix method for the efficient solution of boundary value problems in 2D and 3D layered elastic media,” Comput. Methods Appl. Mech. Eng., vol. 190, no. 45, pp. 5935–5956, 2001. DOI: 10.1016/S0045-7825(01)00206-7.
   Web of Science ®Google Scholar
• E. Siebrits and A. P. Peirce, “An efficient multi-layer planar 3D fracture growth algorithm using a fixed mesh approach,” Numer. Meth Eng., vol. 53, no. 3, pp. 691–717, 2002. DOI: 10.1002/nme.308.
   Web of Science ®Google Scholar
• G. Maier and G. Novati, “On boundary element-transfer matrix analysis of layered elastic systems,” Eng. Anal., vol. 3, no. 4, pp. 208–216, 1986. DOI: 10.1016/0264-682x(86)90063-8.
   Web of Science ®Google Scholar
• V. A. Shevchuk and B. M. Kalynyak, “Stressed state of cylindrical bodies with multilayer inhomogeneous coatings,” Mater. Sci., vol. 46, no. 6, pp. 747–756, 2011. DOI: 10.1007/s11003-011-9348-y.
   Web of Science ®Google Scholar
• V. Shevchuk, “Nonstationary thermoelastic problem for a multilayer coating/half-space assembly at radiative and convective loading,” in Advances in Mechanics. Advanced Structured Materials, vol 191, A. N. Guz, H. Altenbach, V. Bogdanov, V.M. Nazarenko, Eds. Cham: Springer, 2023. DOI: 10.1007/978-3-031-37313-8_27.
   Google Scholar
• C. I. Hung, C. K. Chen, and Z. Y. Lee, “Thermoelastic transient response of multilayered hollow cylinder with initial interface pressure,” J. Therm. Stresses, vol. 24, no. 10, pp. 987–1006, 2001. DOI: 10.1080/014957301753191086.
   Web of Science ®Google Scholar
• H. M. Wang and H. J. Ding, “Transient thermoelastic solution of a multilayered orthotropic hollow cylinder for axisymmetric problems,” J. Therm. Stresses, vol. 27, no. 12, pp. 1169–1185, 2004. DOI: 10.1080/014957390523589.
   Web of Science ®Google Scholar
• R. Lu, F. Zhao, Z. Li, W. Yang, S. Tan, and W. Sun, “Numerical investigation of thermal stress in the fuel element of high-temperature air-cooled nuclear reactor,” Progress Nucl. Energy, vol. 157, pp. 104595, 2023. DOI: 10.1016/j.pnucene.2023.104595.
   Web of Science ®Google Scholar
• C. K. Chao, F. M. Chen and M. H. Shen, “Green’s functions for a point heat source in circularly cylindrical layered media,” J. Therm. Stresses, vol. 29, no. 9, pp. 809–847, 2006. DOI: 10.1080/01495730600705430.
   Web of Science ®Google Scholar
• B. V. Protsiuk, “Thermoelastic state of a piecewise inhomogeneous orthotropic thermosensitive cylinder,” J. Math. Sci., vol. 263, no. 1, pp. 62–83, 2022. DOI: 10.1007/s10958-022-05907-8.
   Google Scholar
• H. M. Wang, “An effective approach for transient thermal analysis in a functionally graded hollow cylinder,” Int. J. Heat Mass Transfer, vol. 67, pp. 499–505, 2013. DOI: 10.1016/j.ijheatmasstransfer.2013.08.043.
   Web of Science ®Google Scholar
• X. Zhang and N. Hasebe, “Elasticity solution for a radially nonhomogeneous hollow circular cylinder,” J. Appl. Mech., vol. 66, no. 3, pp. 598–606, 1999. DOI: 10.1115/1.2791477.
   Web of Science ®Google Scholar
• L.-C. Guo and N. Noda, “Modeling method for a crack problem of functionally graded materials with arbitrary properties—piecewise-exponential model,” Int. J. Solids Struct., vol. 44, no. 21, pp. 6768–6790, 2007. DOI: 10.1016/j.ijsolstr.2007.03.012.
   Web of Science ®Google Scholar
• L. Tokova, A. Yasinskyy, and C. C. Ma, “Effect of the layer inhomogeneity on the distribution of stresses and displacements in an elastic multilayer cylinder,” Acta Mech., vol. 228, no. 8, pp. 2865–2877, 2017. DOI: 10.1007/s00707-015-1519-8.
   Web of Science ®Google Scholar
• P. P. Teodorescu, W. W. Kecs, and A. Toma, Distribution Theory: With Applications in Engineering and Physics. New York: Wiley, 2013.
   Google Scholar
• V. S. Vladimirov, Methods of the Theory of Generalized Functions. New York: Taylor & Francis, 2002.
   Google Scholar
• Y. V. Tokovyy and C. C. Ma, “Analytical solutions to the planar non-axisymmetric elasticity and thermoelasticity problems for homogeneous and inhomogeneous annular domains,” Int. J. Eng. Sci., vol. 47, no. 3, pp. 413–437, 2009. DOI: 10.1016/j.ijengsci.2008.10.005.
   Web of Science ®Google Scholar
• Y. V. Tokovyy and C. C. Ma, “Thermal stresses in anisotropic and radially inhomogeneous annular domains,” J. Therm. Stresses, vol. 31, no. 9, pp. 892–913, 2008. DOI: 10.1080/01495730802194433.
   Web of Science ®Google Scholar
• Y. V. Tokovyy, “Elastic and thermoelastic response of multilayer inhomogeneous hollow cylinders,” Mech. Adv. Mater. Struct., pp. 1–13, 2023. DOI: 10.1080/15376494.2023.2186548.
   Web of Science ®Google Scholar
• Y. Tokovyy, O.Hrytsyna, and M. Hrytsyna, “Explicit thermal analysis of inhomogeneous multilayer cylinders using the direct integration method,” Int. J. Therm. Sci., vol. 196, pp. 108654, 2023. DOI: 10.1016/j.ijthermalsci.2023.108654.
   Web of Science ®Google Scholar
• W. Nowacki, Thermoelasticity. Oxford: Pergamon Press Ltd., 1986.
   Google Scholar
• G. P. Tolstov, Fourier Series. New Jersey: Prentice-Hall, 1962.
   Google Scholar
• B. М. Kalynyak, Y. V. Tokovyy, and A. V. Yasinskyy, “Direct and inverse problems of thermomechanics concerning the optimization and identification of the thermal stressed state of deformed solids,” J. Math. Sci., vol. 236, no. 1, pp. 21–34, 2019. DOI: 10.1007/s10958-018-4095-3.
   Google Scholar
• L. P. Tokova and A. V. Yasinskyy, “Approximate solution of the one-dimensional problem of the theory of elasticity for an inhomogeneous solid cylinder,” J. Math. Sci., vol. 228, no. 2, pp. 133–141, 2018. DOI: 10.1007/s10958-017-3611-1.
   Google Scholar
• Y. V. Tokovyy and C. C. Ma, “Analysis of 2D non-axisymmetric elasticity and thermoelasticity problems for radially inhomogeneous hollow cylinders,” J. Eng. Math., vol. 61, no. 2-4, pp. 171–184, 2008. DOI: 10.1007/s10665-007-9154-6.
   Web of Science ®Google Scholar
• J. N. Reddy and C. D. Chin, “Thermomechanical analysis of functionally graded cylinders and plates,” J. Therm. Stresses, vol. 21, no. 6, pp. 593–626, 1998. DOI: 10.1080/01495739808956165.
   Web of Science ®Google Scholar
• R. M. Kushnir, A. V. Yasinskyy, and Y. V. Tokovyy, “Effect of material properties in the direct and inverse thermomechanical analyses of multilayer functionally graded solids,” Adv. Eng. Mater., vol. 24, no. 5, pp. 2100875, 2022. DOI: 10.1002/adem.202100875.
   Web of Science ®Google Scholar