Investigation of the effect of acid sludge neutralization treatment on producing a sustainable eco-friendly additive for bituminous composites

References

• Aashto-T283, 2007. Standard method of test for resistance of compacted asphalt mixtures to moisture-induced damage. Washington, DC, USA: AASHTO Provisional Standards.
   Google Scholar
• Abro, R., et al., 2013. A comparative study of recycling of used engine oil using extraction by composite solvent, single solvent, and acid treatment methods. ISRN Chemical Engineering.
   Google Scholar
• Alam, S., and Hossain, Z, 2017. Changes in fractional compositions of ppa and sbs modified asphalt binders. Construction and Building Materials, 152, 386–393.
   Web of Science ®Google Scholar
• Amiri, A., Ghanbarzadeh Lak, M., and Ghorban, A., 2011. Recycling of used engine oil in iran and its comparison with modern environmental methods. The fifth conference and specialized exhibition of environmental engineering, Tehran, University of Tehran, Faculty of Environment.
   Google Scholar
• Anon, Ministry of health, treatment and medical education, center for environmental and occupational health, waste classification guide for environmental health inspectors, requirements, instructions and guidelines for the center for environmental and occupational health, tehran university of medical sciences, environmental research institute.
   Google Scholar
• Astm-D5, 2013. Standard test method for penetration of bituminous materials. USA: ASTM International.
   Google Scholar
• Astm-D36, 2014. Standard test method for softening point of bitumen (ring-and-ball apparatus). West Conshohocken, PA, USA: American Society for Testing and Materials.
   Google Scholar
• Astm-D70-97, 1997. Standard test method for specific gravity and density of semi-solid bituminous materials (pycnometer method), astm international, west conshohocken, pa,.
   Google Scholar
• Astm-D92, 2016. Standard test method for flash and fire points by cleveland open cup tester. Annual Book of Standards.
   Google Scholar
• Astm-D95-13e1, 2013. Standard test method for water in petroleum products and bituminous materials by distillation. Annual Book of ASTM Standards, 5.
   Google Scholar
• Astm-D113-17, 2017. Standard test method for ductility of asphalt materials, astm international, west conshohocken, pa.
   Google Scholar
• Astm-D1559-89, 1998. Test method for resistance of plastic flow of bituminous mixtures using marshall apparatus.
   Google Scholar
• Astm-D3515, 2001. Standard specification for hot-mixed, hot-laid bituminous paving mixtures (withdrawn 2009), astm international, west conshohocken, pa.
   Google Scholar
• Astm-D4123-82, 1995. Standard test method for indirect tension test for resilient modulus of bituminous mixtures (withdrawn 2003), astm international, west conshohocken, pa.
   Google Scholar
• Astm-D4402-15, 2015. Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometered.^eds. American Society for Testing and Materials.
   Google Scholar
• Astm-D5477-18, 2018. Standard practice for identification of polymer layers or inclusions by fourier transform infrared microspectroscopy (ft-ir), astm international, west conshohocken, pa,.
   Google Scholar
• Astm-E13, 2013. Standard guide for elemental analysis by wavelength dispersive x-ray fluorescence spectrometry. ASTM International West Conshohocken, PA.
   Google Scholar
• Bai, T., et al., 2020. Rejuvenation of short-term aged asphalt-binder using waste engine oil. Canadian Journal of Civil Engineering, 47 (7), 822–832.
   Web of Science ®Google Scholar
• Bennert, T., et al., 2016. Fatigue performance of re-refined engine oil bottom–modified asphalt: laboratory study. Transportation Research Record, 2574 (1), 1–16.
   Google Scholar
• Cao, X., et al., 2018. Investigation of rheological and chemical properties asphalt binder rejuvenated with waste vegetable oil. Construction and Building Materials, 180, 455–463.
   Web of Science ®Google Scholar
• Chen, B., et al., 2022. Waste control by waste: A comparative study on the application of carbide slag and quicklime in preparation of phosphogypsum-based ecological restoration materials. Chemical Engineering and Processing-Process Intensification, 178, 109051.
   Web of Science ®Google Scholar
• D'angelo, J., Grzybowski, K., and Lewis, S., 2012. Asphalt binder modification with re-refined heavy vacuum distillation oil (rhvdo)ed.^eds. Fifty-seventh annual conference of the Canadian Technical Asphalt Association (CTAA).
   Google Scholar
• D'angelo, J.A., et al., 2013. Evaluation of the performance properties of asphalt mixes produced with re-refined heavy vacuum distillate bottomsed.^eds. PROCEEDINGS OF THE FIFTY-EIGHTH ANNUAL CONFERENCE OF THE CANADIAN TECHNICAL ASPHALT ASSOCIATION (CTAA): ST. JOHN'S, NEWFOUNDLAND AND LABRADOR, NOVEMBER 2013.
   Google Scholar
• Directive, E, 2008. Directive 2008/98/ec of the European parliament and of the council of 19 November 2008 on waste and repealing certain directives. Official Journal of the European Union L, 312 (3), 17–56.
   Google Scholar
• Eleyedath, A., and Swamy, A.K, 2020. Use of waste engine oil in materials containing asphaltic components. Eco-efficient Pavement Construction Materials. Elsevier, 422, 33–50.
   Google Scholar
• Hadadi, V., and Moradi, A, 2019. A novel method for refining of acidic sludge and mixing with vacuum bottom to improve bitumen properties. Petroleum Science and Technology, 37 (13), 1529–1538.
   Web of Science ®Google Scholar
• Hamad, A., et al., 2014. Used oil recycling and treatment in the united arab emirates economical and envirnmental assessmented.^eds. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.
   Google Scholar
• Hardee, J.R, 2004. Physical and chemical and chemical charecteristics of superpave (tm) binders containinig air blown asphalt.
   Google Scholar
• Hasan, U., Whyte, A., and Al Jassmi, H., 2020. Life cycle assessment of roadworks in United Arab Emirates: recycled construction waste, reclaimed asphalt pavement, warm-mix asphalt and blast furnace slag use against traditional approach. Journal of Cleaner Production, 257, 120531.
   Web of Science ®Google Scholar
• Hassanpour, M., Gholami, M., and Farzadkia, M, 2013. Feasibility study of recycling and converting acidic sludge to bitumen in used motor oil refining industries. Journal of Health in the Field, 1 (2), 7–52.
   Google Scholar
• He, Z., et al., 2015. Heavy metal contamination of soils: Sources, indicators and assessment.
   Google Scholar
• Hemida, A., and Abdelrahman, M, 2021. Component analysis of bio-asphalt binder using crumb rubber modifier and guayule resin as an innovative asphalt replacer. Resources, Conservation and Recycling, 169, 105486.
   Web of Science ®Google Scholar
• Hesp, S., et al., 2009. Five year performance review of a northern ontario pavement trial: Validation of ontario's double-edge-notched tension (dent) and extended bending beam rheometer (bbr) test methodsed.^eds. Canadian Technical Asphalt Association Proceedings Of The Annual Conference, 99.
   Google Scholar
• Hesp, S.A., and Shurvell, H.F, 2010. X-ray fluorescence detection of waste engine oil residue in asphalt and its effect on cracking in service. International Journal of Pavement Engineering, 11 (6), 541–553.
   Web of Science ®Google Scholar
• Isenburg, J., and Moore, M, 1992. Generalized acid neutralization capacity test. ASTM Special Technical Publication, 1123, 361–377.
   Google Scholar
• Johnson, K.-a.N., and Hesp, S.A., 2014. Effect of waste engine oil residue on quality and durability of shrp materials reference library binders. Transportation Research Record, 2444 (1), 102–109.
   Google Scholar
• Lamontagne, J., et al., 2001. Comparison by fourier transform infrared (ftir) spectroscopy of different ageing techniques: application to road bitumens. Fuel, 80 (4), 483–488.
   Web of Science ®Google Scholar
• Lienig, J., and Bruemmer, H, 2017. Recycling requirements and design for environmental compliance. Fundamentals of Electronic Systems Design. 241, 193–218.
   Google Scholar
• Marsac, P., et al., 2014. Potential and limits of ftir methods for reclaimed asphalt characterisation. Materials and Structures, 47 (8), 1273–1286.
   Web of Science ®Google Scholar
• Mills-Beale, J., et al., 2014. Aging influence on rheology properties of petroleum-based asphalt modified with biobinder. Journal of Materials in Civil Engineering, 26 (2), 358–366.
   Web of Science ®Google Scholar
• Mirwald, J., Nura, D., and Hofko, B, 2022. Recommendations for handling bitumen prior to ftir spectroscopy. Materials and Structures, 55 (2), 1–17.
   Web of Science ®Google Scholar
• Nasrekani, A.A., et al., 2017. Improving moisture sensitivity of asphalt concrete using natural bitumen (gilsonite)ed.^eds. Proc., Transportation Research Board 96th Annual Meeting, 17-05663.
   Google Scholar
• Nizamuddin, S., et al., 2020. Recycled plastic as bitumen modifier: The role of recycled linear low-density polyethylene in the modification of physical, chemical and rheological properties of bitumen. Journal of Cleaner Production, 266, 121988.
   Web of Science ®Google Scholar
• Notani, M.A., et al., 2021. Performance evaluation of using waste toner in bituminous material by focusing on aging and moisture susceptibility. Journal of Materials in Civil Engineering, 33 (1), 04020405.
   Web of Science ®Google Scholar
• Organization, W.H, 1996. Permissible limits of heavy metals in soil and plants. Geneva: World Health Organization.
   Google Scholar
• Ouyang, C., et al., 2006. Improving the aging resistance of styrene–butadiene–styrene tri-block copolymer modified asphalt by addition of antioxidants. Polymer Degradation and Stability, 91 (4), 795–804.
   Web of Science ®Google Scholar
• Planche, J., et al., 2015. Blended reob binder advanced chemical and physical characterizationed.^eds. FHWA Expert Task Group Meeting, Fall River, Mass.
   Google Scholar
• Protection, A.E, 2022. Alberta tier 1 soil and groundwater remediation guidelines. (ISBN: 978-1-4601-5501-1).
   Google Scholar
• Qiu, H., et al., 2013. Influence of filler–bitumen ratio on performance of modified asphalt mortar by additive. Journal of Modern Transportation, 21 (1), 40–46.
   Google Scholar
• Santos, B., 1995. Process for converting acid sludge to intermediate sludge and soft and/or hard asphalt. U.S. Patent 5,470,455.
   Google Scholar
• Santos, B., 1996. Process for converting acid sludge to asphalt. U.S. Patent No. 5,573,656.
   Google Scholar
• Speight, J.G., and Exall, D.I., 2014. Refining used lubricating oils. Boca Raton, FL: CRC Press.
   Google Scholar
• Stm-D6521-19a, 2019. Standard practice for accelerated aging of asphalt binder using a pressurized aging vessel (pav), astm international, west conshohocken, pa,.
   Google Scholar
• Su, N., and Chen, J, 2002. Engineering properties of asphalt concrete made with recycled glass. Resources, Conservation and Recycling, 35 (4), 259–274.
   Web of Science ®Google Scholar
• Sun, D., et al., 2017. Formulation and aging resistance of modified bio-asphalt containing high percentage of waste cooking oil residues. Journal of Cleaner Production, 161, 1203–1214.
   Web of Science ®Google Scholar
• Taherkhani, H., and Noorian, F, 2020. Comparing the effects of waste engine and cooking oil on the properties of asphalt concrete containing reclaimed asphalt pavement (rap). Road Materials and Pavement Design, 21 (5), 1238–1257.
   Web of Science ®Google Scholar
• Udonne, J.D, 2011. A comparative study of recycling of used lubrication oils using distillation, acid and activated charcoal with clay methods. Journal of Petroleum and Gas Engineering, 2 (2), 12–19.
   Google Scholar
• Underwood, B.S., and Kim, Y.R, 2011. Experimental investigation into the multiscale behaviour of asphalt concrete. International Journal of Pavement Engineering, 12 (4), 357–370.
   Web of Science ®Google Scholar
• Us-Epa, 1992. Sw-846 method 1311: toxicity characteristic leaching procedure, part of test methods for evaluating solid waste, physical/chemical methods.
   Google Scholar
• Us-Epa, 1996. Sw-846 method 3050b: acid digestion of sediments, sludges and soils. Test methods for evaluating solid wastes: Physical/chemical methods. EPA SW-846, 1, 3050B-1-3050B-12.
   Google Scholar
• Villalba, G., et al., 2002. A proposal for quantifying the recyclability of materials. Resources, Conservation and Recycling, 37 (1), 39–53.
   Web of Science ®Google Scholar
• Wielinski, J., et al., 2015. Analysis of vacuum tower asphalt extender and effect on bitumen and asphalt properties. Road Materials and Pavement Design, 16 (sup1), 90–110.
   Web of Science ®Google Scholar
• Xie, J., et al., 2020. Investigation of the physic-chemical properties and toxic potential of basic oxygen furnace slag (bof) in asphalt pavement constructed after 15 years. Construction and Building Materials, 238, 117630.
   Web of Science ®Google Scholar
• Yi-Qiu, T., et al., 2010. Research on high-and low-temperature properties of asphalt-mineral filler mastic. Journal of Materials in Civil Engineering, 22 (8), 811–819.
   Web of Science ®Google Scholar
• You, T., et al., 2018. Laboratory performance of asphalt mixtures containing re-refined engine oil bottoms modified asphalt binders. Transportation Research Record, 2672 (28), 88–95.
   Web of Science ®Google Scholar
• Zhang, L.-J., et al., 2012. An in situ method for translation of acid sludge to modified asphalt paving materials. Construction and Building Materials, 30, 682–685.
   Web of Science ®Google Scholar
• Ziari, H., et al., 2019. The effect of eaf dust and waste pvc on moisture sensitivity, rutting resistance, and fatigue performance of asphalt binders and mixtures. Construction and Building Materials, 203, 188–200.
   Web of Science ®Google Scholar