Investigation of graphite tailings as a substitute for filler in asphalt mastics

References

• Al Assi, A., et al., 2021. Development of an analysis tool for deterministic and probabilistic viscoelastic continuum damage approach. Construction and Building Materials, 306, 124853.
   Web of Science ®Google Scholar
• Antunes, V., et al., 2017. Evaluation of waste materials as alternative sources of filler in asphalt mixtures. Materials and Structures, 50, 6.
   Web of Science ®Google Scholar
• Benedetto, A., Calvi, A.J.C., and Materials, B, 2013. A pilot study on microwave heating for production and recycling of road pavement materials. Construction and Building Materials, 44, 351–359.
   Web of Science ®Google Scholar
• Bi, Y., et al., 2020. Evaluation of rheological master curves of asphalt mastics and asphalt-filler interaction indices. Construction and Building Materials, 265, 120046.
   Web of Science ®Google Scholar
• Buttlar, W.G., et al., 1999. Understanding asphalt mastic behavior through micromechanics (with discussion and closure).
   Google Scholar
• Cao, W., and Wang, C, 2018. A new comprehensive analysis framework for fatigue characterization of asphalt binder using the linear amplitude sweep test. Construction and Building Materials, 171, 1–12.
   Web of Science ®Google Scholar
• Chen, F., et al., 2015. A study on dielectric response of bitumen in the low-frequency range. Road Materials and Pavement Design, 16 (Suppl. 1), 153–169.
   Google Scholar
• Chen, J., et al., 2021. New innovations in pavement materials and engineering: a review on pavement engineering research 2021. Journal of Traffic and Transportation Engineering (English Edition), 8 (6), 815–999.
   Google Scholar
• Chomicz-Kowalska, A, 2021. A study of adhesion in foamed wma binder-aggregate systems using boiling water stripping tests. Materials (Basel), 14, 21. Available from: https://www.ncbi.nlm.nih.gov/pubmed/34771773.
   Web of Science ®Google Scholar
• Cui, N., et al., 2017. Geological characteristics and analysis of known and undiscovered graphite resources of China. Ore Geology Reviews, 91, 1119–1129.
   Web of Science ®Google Scholar
• Cuiping, B., et al., 2012. Natural graphite tailings as heterogeneous fenton catalyst for the decolorization of rhodamine B. Chemical Engineering Journal, 197, 306–313.
   Web of Science ®Google Scholar
• Dan, L., et al., 2014. Analysing the effects of the mesoscopic characteristics of mineral powder fillers on the cohesive strength of asphalt mortars at low temperatures. Construction and Building Materials, 65, 330–337.
   Web of Science ®Google Scholar
• Das, P.K., et al., 2013. Micromechanical investigation of phase separation in bitumen by combining atomic force microscopy with differential scanning calorimetry results. Road Materials and Pavement Design, 14 (Suppl. 1), 25–37.
   Web of Science ®Google Scholar
• Dos Santos Conserva, L.R., et al., 2017. Pyroplastic deformation of porcelain stoneware tiles: wet vs. dry processing. Journal of the European Ceramic Society, 37 (1), 333–342.
   Web of Science ®Google Scholar
• Fan, Z., et al., 2020. Study on interfacial debonding between bitumen and aggregate based on micromechanical damage model. International Journal of Pavement Engineering, 23:2, 340–348.
   Web of Science ®Google Scholar
• Fan, Z., et al., 2021. Multiscale understanding of interfacial behavior between bitumen and aggregate: from the aggregate mineralogical genome aspect. Construction and Building Materials, 271,1–11.
   Web of Science ®Google Scholar
• Fu, Y., et al., 2022. Lithium-ion transfer strengthened by graphite tailings and coking coal for high-rate performance anode. Chemical Engineering Journal, 442, 1–10.
   Web of Science ®Google Scholar
• Gedik, A., Selcuk, S., and Lav, A.H, 2021. Investigation of recycled fluorescent lamps waste as mineral filler in highway construction: A case of asphaltic pavement layers. Resources, Conservation and Recycling, 168, 1–15.
   Web of Science ®Google Scholar
• Guo, M., et al., 2017. A direct characterization of interfacial interaction between asphalt binder and mineral fillers by atomic force microscopy. Materials and Structures, 50, 2.
   Web of Science ®Google Scholar
• Hong, B., et al., 2021. Gene-editable materials for future transportation infrastructure: a review for polyurethane-based pavement. Journal of Infrastructure Preservation and Resilience, 2 (1), 27. doi:10.1186/s43065-021-00039-w.
   Google Scholar
• Jafarian, S., and Modarres, A, 2020. Study on the fatigue properties of bitumen emulsion-cement mastics using frequency sweep and linear amplitude sweep tests. International Journal of Pavement Engineering, 23 (6), 1993–2008.
   Web of Science ®Google Scholar
• Jaselskis, E.J., Grigas, J., and Brilingas, A.J.J.O.M.I.C.E, 2003. Dielectric properties of asphalt pavement. Journal of Materials in Civil Engineering, 15 (5), 427–434.
   Web of Science ®Google Scholar
• Li, T., et al., 2020. Microstructural analysis of the effects of compaction on fatigue properties of asphalt mixtures. International Journal of Pavement Engineering, 23 (1), 9–20.
   Web of Science ®Google Scholar
• Lima, M.S.S., and Thives, L.P, 2020. Evaluation of red mud as filler in Brazilian dense graded asphalt mixtures. Construction and Building Materials, 260, 1–9.
   Web of Science ®Google Scholar
• Lin, J., et al., 2022. Using recycled waste glass fiber reinforced polymer (GFRP) as filler to improve the performance of asphalt mastics. Journal of Cleaner Production, 336, 1–11.
   Web of Science ®Google Scholar
• Liu, H., et al., 2018. Mechanical and electrical characteristics of graphite tailing concrete. Advances in Materials Science and Engineering, 2018, 1–9.
   Web of Science ®Google Scholar
• López-Montero, T., et al., 2022. Analysing the potential use of a low-grade magnesium carbonate by-product as a filler in hot asphalt mixtures. International Journal of Pavement Engineering, 1–12. Available from: https://doi.org/10.1080/10298436.2022.2083618.
   Web of Science ®Google Scholar
• Martín-Márquez, J., Rincón, J.M., and Romero, M, 2010. Effect of microstructure on mechanical properties of porcelain stoneware. Journal of the European Ceramic Society, 30 (15), 3063–3069.
   Web of Science ®Google Scholar
• Notani, M.A., et al., 2018. Evaluating fatigue resistance of toner-modified asphalt binders using the linear amplitude sweep test. Road Materials and Pavement Design, 20 (8), 1927–1940.
   Web of Science ®Google Scholar
• Palani Velayuda Shanmugasundram, H.P., Jayamani, E., and Soon, K.H., 2022. A comprehensive review on dielectric composites: classification of dielectric composites. Renewable and Sustainable Energy Reviews, 157, 1–24.
   Web of Science ®Google Scholar
• Palierne, J.E, 1990. Linear rheology of viscoelastic emulsions with interfacial tension. Rheologica Acta, 29 (3), 10.
   Web of Science ®Google Scholar
• Peng, Y., et al., 2021. Preparation of autoclaved aerated concrete by using graphite tailings as an alternative silica source. Construction and Building Materials, 267, 1–9.
   Web of Science ®Google Scholar
• Rashid, F., Hossain, Z., and Bhasin, A, 2017. Nanomechanistic properties of reclaimed asphalt pavement modified asphalt binders using an atomic force microscope. International Journal of Pavement Engineering, 20 (3), 357–365.
   Web of Science ®Google Scholar
• Schmets, A., et al., 2010. On the existence of wax-induced phase separation in bitumen. International Journal of Pavement Engineering, 11 (6), 555–563.
   Web of Science ®Google Scholar
• Shamsaei, M., et al., 2019. Experimental evaluation of ceramic waste as filler in hot mix asphalt. Clean Technologies and Environmental Policy, 22 (2), 535–543.
   Web of Science ®Google Scholar
• Shang, J.Q., et al., 1999. Measurement of complex permittivity of asphalt pavement materials. Journal of Transportation Engineering, 125 (4), 347–356.
   Google Scholar
• Taherkhani, H., and Vahabi Kamsari, S, 2020. Evaluating the properties of zinc production wastes as filler and their effects on asphalt mastic. Construction and Building Materials, 265, 1–11.
   Web of Science ®Google Scholar
• Transport, E.D.O.C.J.O.H.A, 2020. Review on China’s pavement engineering research·2020. China Journal of Highway Transport, 33 (10), 66.
   Google Scholar
• Trigos, L., et al., 2021. Dielectric properties versus microwave heating susceptibility of aggregates for self-healing asphalt mixtures. Construction and Building Materials, 293, 1–12.
   Web of Science ®Google Scholar
• Underwood, B.S., and Kim, Y.R.J.T.I.J.O.P.E, 2013. Microstructural investigation of asphalt concrete for performing multiscale experimental studies. International Journal of Pavement Engineering, 14, 5.
   Web of Science ®Google Scholar
• Wang, Z.-R., et al., 2020. Degradation characteristics of graphite tailings cement mortar subjected to freeze-thaw cycles. Construction and Building Materials, 234, 1–15.
   Web of Science ®Google Scholar
• Wasfi Al-Mistarehi, B., Khadaywi, T.S., and Khaled Hussein, A., 2021. Investigating the effects on creep and fatigue behavior of asphalt mixtures with recycled materials as fillers. Journal of King Saud University – Engineering Sciences, 33 (5), 355–363.
   Google Scholar
• Wu, J., et al., 2021a. Effect of talc on microstructure and properties of the graphite tailing stoneware tiles. Construction and Building Materials, 311, 1–9.
   Web of Science ®Google Scholar
• Wu, W., et al., 2021b. A review of asphalt-filler interaction: mechanisms, evaluation methods, and influencing factors. Construction and Building Materials, 299, 1–21.
   Web of Science ®Google Scholar
• Xu, J., et al., 2022. Reclamation of waste oils in asphalt modification towards enhanced low-temperature performance of pavement in cold region. International Journal of Pavement Engineering, 1–16. Available from: https://doi.org/10.1080/10298436.2022.2069244.
   Web of Science ®Google Scholar
• Xue, J., et al., 2021. Investigations on influencing factors of resistivity measurement for graphite tailings concrete. Cement and Concrete Composites, 123, 1–10.
   Web of Science ®Google Scholar
• Yu, X., Luo, R., and Huang, T, 2022. Influence of temperature on the dielectric properties of asphalt mixtures. International Journal of Pavement Engineering, 1–11. Available from: https://doi.org/10.1080/10298436.2022.2046273.
   Web of Science ®Google Scholar
• Zhang, J., et al., 2016. Evaluation indices of asphalt–filler interaction ability and the filler critical volume fraction based on the complex modulus. Road Materials and Pavement Design, 18 (6), 1338–1352.
   Web of Science ®Google Scholar
• Zhang, C., et al., 2022. Research on modification of mechanical properties of recycled aggregate concrete by replacing sand with graphite tailings. Reviews on Advanced Materials Science, 61 (1), 493–512.
   Web of Science ®Google Scholar
• Ziegel, K.D., and Romanov, A, 1973. Modulus reinforcement in elastomer composites. I. Inorganic fillers. Journal of Applied Polymer Science, 17 (4), 1119–1131.
   Web of Science ®Google Scholar