Modification of MEPDG rutting model based on RIOHTrack data

References

• Ahmed, A., and Erlingsson, S, 2013. Evaluation of permanent deformation models for unbound granular materials using accelerated pavement tests. Road Materials and Pavement Design, 14 (1), 178–195.
   Web of Science ®Google Scholar
• American Association of State Highway and Transportation Officials, 2008. Mechanistic-empirical pavement design guide: a manual of practice. Interim edition.
   Google Scholar
• Archilla, A. R., and Madanat, S, 2000. Development of a pavement rutting model from experimental data. Journal of Transportation Engineering, 126 (4), 291–299.
   Web of Science ®Google Scholar
• Aryes, M. Jr., 2002. Unbound Material Rut Model Modification. Development of the 2002 Guide for the Design of New and Rehabilitated Pavement Structures. NCHRP 1-37A. Inter Team Technical Report.
   Google Scholar
• Barksdale, R. D, 1972, September. Laboratory evaluation of rutting in base course materials. In Presented at the Third International Conference on the Structural Design of Asphalt Pavements, Grosvenor House, Park Lane, London, England, Sept. 11–15, 1972. (Vol. 1, No. Proceeding).
   Google Scholar
• Brown, S. F., and Snaith, M. S., 1974. The permanent deformation characteristics of a dense bitumen macadam subjected to repeated loading. In Association of Asphalt Paving Technologists Proc (Vol. 43).
   Google Scholar
• Coleri, E., et al., 2012. Rutting of rubberized gap-graded and polymer-modified dense-graded asphalt overlays in composite pavements. Transportation Research Record, 2304 (1), 195–204.
   Google Scholar
• Glover, L.T., and Mallela, J, 2009. Guidelines for implementing NCHRP1-37A ME design procedures in Ohio: Vol. 4 of MEPDG models validation and recalibration. Columbus, OH: Ohio Dept. of Transportation.
   Google Scholar
• Gong, J.Z., 2018. Research on modulus tests and back-calculation methods of asphalt pavement structure. Southeast University. (In Chinese).
   Google Scholar
• Gong, H., et al., 2018. Improving accuracy of rutting prediction for mechanistic-empirical pavement design guide with deep neural networks. Construction and Building Materials, 190, 710–718.
   Web of Science ®Google Scholar
• Hoegh, K., Khazanovich, L., and Jense, M., 2010. Local calibration of mechanistic-empirical pavement design guide rutting model: Minnesota road research project test sections. Transp. Res. Rec, 2180 (1), 130–141.
   Google Scholar
• Huang, W., et al., 2020bb. Design and construction of super-long span bridges in China: review and future perspectives. Frontiers of Structural and Civil Engineering, doi:10.1007/s11709-020-0644-1.
   Web of Science ®Google Scholar
• Huang, W., Guo, W., and Wei, Y, 2019. Thermal effect on rheological properties of epoxy asphalt mixture and stress prediction for bridge deck paving. Journal of Materials in Civil Engineering, 31 (10), 04019222.
   Web of Science ®Google Scholar
• Huang, W., Guo, W., and Wei, Y, 2020. Prediction of paving performance for epoxy asphalt mixture by its time- and temperature-dependent properties. Journal of Materials in Civil Engineering, 32 (3), 04020017.
   Web of Science ®Google Scholar
• Huang, W., Liang, S. M., and Wei, Y, 2020. Surface deflection-based reliability analysis of asphalt pavement design. Sci China Tech Sci, 63, 1824–1836.
   Web of Science ®Google Scholar
• Jeong, J., Underwood, B. S., and Kim, Y. R, 2021. Rutting performance prediction using index-volumetrics relationships with stress sweep rutting test and Hamburg wheel-track test. Construction and Building Materials, 295, 123664.
   Web of Science ®Google Scholar
• JTG D50-2017, 2017. Design of highway asphalt pavement.
   Google Scholar
• Kaloush, K. E., and Witczak, M. W, 2000. Development of a Permanent to Elastic Strain Ratio Model for Asphalt Mixtures. Development of the 2002 Guide for the Design of New and Rehabilitated Pavement Structures. NCHRP 1-37A. Inter Team Technical Report.
   Google Scholar
• Kenis, W. J, 1978. Predictive design procedures, VESYS users manual: An interim design method for flexible pavements using the VESYS structural subsystem (No. FHWA-RD-77-154). The United States. Federal Highway Administration.
   Google Scholar
• Leahy, R.B., 1989. Permanent Deformation Characteristics of Asphalt Concrete, Ph.D. Dissertation, University of Maryland, College Park.
   Google Scholar
• Li, Q., et al., 2014. Evaluating the rutting resistance of asphalt mixtures using an advanced repeated load permanent deformation test under field conditions. Construction and Building Materials, 61, 241–251.
   Web of Science ®Google Scholar
• Li, J., et al., 2022. Dynamic strain response of hot-recycled asphalt pavement under dual-axle accelerated loading conditions. Coatings, 12 (6), 843.
   Web of Science ®Google Scholar
• Liu, Z., et al., 2022. Analysis of the dynamic responses of asphalt pavement based on full-scale accelerated testing and finite element simulation. Construction and Building Materials, 325, 126429.
   Web of Science ®Google Scholar
• Metcalf, J. B. (2016). A brief history of full-scale accelerated pavement testing facilities to 1962. in: The roles of accelerated pavement testing in pavement sustainability. Springer, Cham, 3–16.
   Google Scholar
• Monismith, C. L., et al., 1994. Permanent deformation response of asphalt aggregate mixes (No. SHRP-A-415).
   Google Scholar
• Morris, J., et al., 1974. Permanent deformation in asphalt pavements can be predicted. In Proc. AAPT (Vol. 43).
   Google Scholar
• Muniandy, R., Aburkaba, E., and Thamer, N, 2013. Comparison of flexible pavement performance using kenlayer and chev PC software program. Australian Journal of Basic and Applied Sciences, 7 (9), 112–119.
   Google Scholar
• Rafiq, W., et al., 2020. Investigation on Hamburg wheel-tracking device stripping performance properties of recycled hot-mix asphalt mixtures. Materials, 13 (21), 4704.
   PubMed Web of Science ®Google Scholar
• Rahman, M. S., Podolsky, J. H., and Scholz, T, 2019. Preliminary local calibration of performance prediction models in AASHTOWare pavement ME design for flexible pavement rehabilitation in Oregon. Journal of Transportation Engineering, Part B: Pavements, 145 (2), 05019002.
   Web of Science ®Google Scholar
• Rushing, J. F., Little, D. N., and Garg, N, 2012. Asphalt pavement analyzer used to assess rutting susceptibility of hot-mix asphalt designed for high tire pressure aircraft. Transportation Research Record, 2296 (1), 97–105.
   Google Scholar
• Seitllari, A., Lanotte, M. A., and Kutay, M. E, 2020. Recommended calibration procedure of MEPDG asphalt rutting model using repeated load permanent deformation and confined and unconfined dynamic modulus data. Journal of Transportation Engineering Part B Pavements, 147 (1), 04020079.
   Web of Science ®Google Scholar
• Sha, Q.L., 1998. Asphalt pavement on semi-rigid subgrade on high-grade highway. Beijing: China Communication Press. (In Chinese).
   Google Scholar
• SHRP, 1994. Permanent deformation response of asphalt aggregate mixes (SHRP-A-415) Final report, SHRP: National research council.
   Google Scholar
• Sousa, J. B., and Weissman, S. L, 1994. Modeling permanent deformation of asphalt-aggregate mixes (with discussion). Journal of the Association of Asphalt Paving Technologists, 63, 224–257.
   Google Scholar
• Srikanth, M. R, 2015. Study on effect of surface course thickness and modulus of elasticity on performance of flexible pavement using a software tool. International Journal of Engineering Research & Technology, 4 (08), 771–774.
   Google Scholar
• Suh, Y.C., Cho, N.H., and Mun, S, 2011. Development of mechanistic–empirical design method for an asphalt pavement rutting model using APT. Construction and Building Materials, 25 (4), 1685–1690.
   Web of Science ®Google Scholar
• Tian, Y., et al., 2017. Development of a mid-depth profile monitoring system for accelerated pavement testing. Construction and Building Materials, 140, 1–9.
   Web of Science ®Google Scholar
• Timm, D. H., and Newcomb, D. E, 2006. Perpetual pavement design for flexible pavements in the US. International Journal of Pavement Engineering, 7 (2), 111–119.
   Google Scholar
• Tong, J., et al., 2022. A criterion of asphalt pavement rutting based on the thermal-visco-elastic-plastic model. International Journal of Pavement Engineering, 23 (4), 1134–1144.
   Web of Science ®Google Scholar
• Von Quintus, H., and Moulthrop, J., 2007. Mechanistic-empirical pavement design guide flexible pavement performance prediction models, volume i executive research summary. Final Rep. No. FHWA/MT-07-008/8158-1. Helena, MT: Montana Dept. of Transportation.
   Google Scholar
• Wang, X. D, 2017. Design of pavement structure and material for full-scale test track. Journal of Highway and Transportation Research and Development, 34 (6), 30–37. (in Chinese).
   Google Scholar
• Wijeratne, A., and Sargious, M., 1987. Prediction of rutting in virgin and recycled asphalt mixtures for pavements using triaxial tests. In Association of Asphalt Paving Technologists Proc (Vol. 56).
   Google Scholar
• Wu, Z., and Yang, X, 2012. Evaluation of the MEPDG permanent deformation models in Louisiana conditions. In Proc., GeoCongress 2012: State of the Art and Practice in Geotechnical Engineering. GSP 225, 1438–1447. Baton Rouge, LA: Louisiana Dept. of Transportation and Development.
   Google Scholar
• Yan, Q.L., 2006. Research on rut-resistance of asphalt mixture. Southeast University. (In Chinese).
   Google Scholar
• Yang, Z.Q, 2010. Analysis on traffic capacity of hunan section of Beijing - Hong Kong -macao national expressway. Hunan Communication Science and Technology, 36 (1), 9–11. (In Chinese).
   Google Scholar
• Zhang, J., et al., 2013. Comparison of flow number, dynamic modulus, and repeated load tests for evaluation of HMA permanent deformation. Construction and Building Materials, 44, 391–398.
   Web of Science ®Google Scholar
• Zhang, L., Zhou, X., and Wang, X, 2020. Research progress of long-life asphalt pavement behavior based on the RIOHTrack full-scale accelerated loading test. Chinese Science Bulletin, 65 (30), 3247–3258.
   Google Scholar
• Zhou, F., and Scullion, T, 2002. Discussion: three stages of permanent deformation curve and rutting model. International Journal of Pavement Engineering, 3 (4), 251–260.
   Google Scholar
• Zhou, F., Scullion, T., and Sun, L, 2004. Verification and modeling of three-stage permanent deformation behavior of asphalt mixes. Journal of Transportation Engineering, 130 (4), 486–494.
   Google Scholar
• Zhu, J., et al., 2017. Development and calibration of shear-based rutting model for asphalt concrete layers. International Journal of Pavement Engineering, 18 (10), 937–944.
   Web of Science ®Google Scholar
• Zhu, Y., Ni, F., and Li, H, 2017. Calibration and sensitivity analysis of rut prediction model for semi-rigid pavement using AASHTOWare ME design. Road Materials and Pavement Design, 18 (sup3), 23–32.
   Web of Science ®Google Scholar