References
- Bergman, T.L., et al., 2011. Introduction to heat transfer. Jefferson City: John Wiley & Sons.
- Brown, E.R., 1990. Density of asphalt concrete: how much is needed? Transportation Research Record: Journal of the Transportation Research Board, 1282 (90), 27–32.
- Brown, E.R., and Cross, S.A., 1989. A study of in-place rutting of asphalt pavements. NCAT Report 89-02, (April).
- Coleri, E., et al., 2013. Micromechanical investigation of open-graded asphalt friction courses’ rutting mechanisms. Construction and Building Materials, 44, 25–34.
- Cong, L., et al., 2016. Laboratory and field investigations of permeability and surface temperature of asphalt pavement by infrared thermal method. Construction and Building Materials, 113, 442–448.
- Dehdezi, P., 2020. Using ground penetrating radar (GPR) to evaluate air voids content in hot mix asphalt, International Conference on Civil Infrastructure and Construction, February 2-5, 522–527.
- Diamanti, N., Annan, A.P., and Jackson, S.R., 2019. Measuring asphalt pavement density with a GPR-based sensor: a case study. In: 10th International workshop on advanced ground penetrating radar, held at near surface geoscience conference and exhibition 2019, NSG 2019.
- Elfner, M., et al., 2019. A spatially resolved in situ calibration applied to infrared thermography. Measurement Science and Technology, 30 (8), 085201.
- Gade, R., and Moeslund, T.B., 2014. Thermal cameras and applications: a survey. Machine Vision and Applications, 25 (1), 245–262.
- Goel, A., and Das, A., 2008. Nondestructive testing of asphalt pavements for structural condition evaluation: a state of the art. Nondestructive Testing and Evaluation, 23 (2), 121–140.
- Graybeal, B., and Tanesi, J., 2008. A cementitious long-life wearing course to reduce frequency of maintenance works on high-traffic roads. Transport Research Arena Europe 2008, 1561 (February), 454–461.
- Hartley, R., and Zisserman, A., 2003. Multiple view geometry in computer vision. Cambridge: Cambridge University Press.
- Joshaghani, A., and Shokrabadi, M., 2021. Ground penetrating radar (GPR) applications in concrete pavements. International Journal of Pavement Engineering, 23 (13), 1–28.
- Lagüela, S., et al., 2011. Calibration and verification of thermographic cameras for geometric measurements. Infrared Physics & Technology, 54 (2), 92–99.
- McDaniel, R.S. and Levenberg, E, 2013. Risk management of low air void asphalt concrete mixtures risk management of low air void asphalt concrete mixtures. West Lafayette, IN: Transportation Research Program, Indiana Department of Transportation and Purdue Univer-sity, West Lafayette, Indiana.
- Mfiananga, D.A., 2006. Sampling procedure for pavement condition evaluation of local collectors and access roads. Tanzania Journal of Engineering and Technology, 29 (2), 213–223.
- Mohajerani, A., Bakaric, J., and Jeffrey-Bailey, T., 2017. The urban heat island effect, its causes, and mitigation, with reference to the thermal properties of asphalt concrete. Journal of Environmental Management, 197, 522–538.
- Mrawira, D.M., and Luca, J., 2002. Thermal properties and transient temperature response of full-depth asphalt pavements. Transportation Research Record: Journal of the Transportation Research Board, 1089 (1), 160–171.
- Ochs, M., et al., 2009. A novel calibration method for an infrared thermography system applied to heat transfer experiments. Measurement Science and Technology, 20 (7), 075103.
- Sivagnanasuntharam, S., et al., 2022. Prediction of average in-depth temperature of asphalt pavement using surface temperature measured during intelligent compaction. International Journal of Pavement Engineering, (May), 1–24.
- Stempihar, J., et al., 2012. Porous asphalt pavement temperature effects for urban heat island analysis. Transportation Research Record: Journal of the Transportation Research Board, 2293, 123–130.
- Stroup-Gardiner, M., Law, M., and Nesmith, C., 2000. Using infrared thermography to detect and measure segregation in Hot Mix asphalt pavements. International Journal of Pavement Engineering, 1 (4), 265–284.
- Tan, S.A., and Fwa, T.F., 1992. Influence of pavement materials on the thermal environment of outdoor spaces. Building and Environment, 27 (3), 289–295.
- Tarefder, R.A., and Ahmad, M., 2015. Evaluating the relationship between permeability and moisture damage of asphalt concrete pavements. Journal of Materials in Civil Engineering, 27 (5), 04014172.
- Tashan, J., and Al-mahaidi, R., 2012. Investigation of the parameters that influence the accuracy of bond defect detection in CFRP bonded specimens using IR thermography. Composite Structures, 94 (2), 519–531.
- Thusyanthan, I., Blower, T., and Cleverly, W., 2016. Innovative uses of thermal imaging in civil engineering. Proceedings of the Institution of Civil Engineers: Civil Engineering, 81–87.
- Usamentiaga, R., et al., 2012. Non-destructive inspection of drilled holes in reinforced honeycomb sandwich panels using active thermography. Infrared Physics & Technology, 55 (6), 491–498.
- Usamentiaga, R., et al., 2014. Infrared thermography for temperature measurement and non-destructive testing. Sensors, 14 (7), 12305–12348.
- Valiorgue, F., et al., 2013. Emissivity calibration for temperatures measurement using thermography in the context of machining. Applied Thermal Engineering, 58 (1–2), 321–326.
- Vardanega, P.J., 2014. State of the art: permeability of asphalt concrete. Journal of Materials in Civil Engineering, 26 (1), 54–64.
- Widodo, S., Subagio, B.S., and Setiadji, B.H., 2013. Resistance of fine graded asphalt concrete wearing course to rutting at varying temperatures and densities. Civil and Environmental Research, 3 (13), 84–89.