An exploratory framework for accelerated airport pavement testing using the geotechnical centrifuge

References

• Ameri, M., Yeganeh, S., and Valipour, P.E., 2019. Experimental evaluation of fatigue resistance of asphalt mixtures containing waste elastomeric polymers. Construction and Building Materials, 198, 638–649.
   Web of Science ®Google Scholar
• Brown, S., 2004. Accelerated pavement testing in highway engineering. ed. Proceedings of the Institution of Civil Engineers-Transport, 173–180.
   Google Scholar
• Cai, M., and Wang, S., 2013. Accelerated pavement testing in Chinese mainland. Procedia-Social and Behavioral Sciences, 96, 104–113.
   Google Scholar
• Choubane, B., and Greene, J., 2019. Accelerated pavement testing: celebrating over 100 years of innovation and economic benefits. Centennial Papers.
   Google Scholar
• Circular-FAA-Advisory, 2018. 150/5370-10H-standards for specifying construction of airports. Office of Airport Safety & Standards, Airport Engineering Division, Federal Aviation Administration, Washington, DC.
   Google Scholar
• Cocurullo, A., et al., 2008. Indirect tensile versus two-point bending fatigue testing. ed. Proceedings of the Institution of Civil Engineers-Transport, 207–220.
   Google Scholar
• General Dynamics Information Technology, I., 2019. National airport pavement construction cycle 1 (CC1) comprehensive report.
   Google Scholar
• Hossain, A., and Zaniewski, J.P., 1991. Characterization of falling weight deflectometer deflection basin. Transportation Research Record, 1293, 1–11.
   Google Scholar
• Hu, Y., et al., 2023. Modulus attenuation of semi-rigid asphalt pavement layer in accelerated pavement testing with MLS66. International Journal of Transportation Science and Technology, 12 (1), 62–70.
   Google Scholar
• Huang, Y.H., 2004. Pavement analysis and design. Upper Saddle River, NJ: Pearson Prentice Hall.
   Google Scholar
• Huang, Y.H., Drnevich, V.P., and Roghani, H., 1991. Prediction of fatigue cracking and rutting in asphalt pavements by small-scale centrifuge models. Report No SHRP-ID/UFR-91-516, Strategic Highway Research Program, National Research Council, Washington D.C.
   Google Scholar
• Jansen, D., Wacker, B., and Pinkofsky, L., 2018. Full-scale accelerated pavement testing with the MLS30 on innovative testing infrastructures. International Journal of Pavement Engineering, 19 (5), 456–465.
   Web of Science ®Google Scholar
• Jones, D., et al., 2012. Advances in pavement design through full-scale accelerated pavement testing. London: CRC Press.
   Google Scholar
• Langhaar, H.L., 1962. Dimensional analysis and theory of models. New York: John Wiley.
   Google Scholar
• Liao, M.-C., Chen, J.-S., and Tsou, K.-W., 2012. Fatigue characteristics of bitumen-filler mastics and asphalt mixtures. Journal of Materials in Civil Engineering, 24 (7), 916–923.
   Web of Science ®Google Scholar
• Ling, J., et al., 2020. Accelerated pavement testing for rutting evaluation of hot-mix asphalt overlay under high tire pressure. Journal of Transportation Engineering, Part B: Pavements, 146 (2), 04020009.
   Web of Science ®Google Scholar
• Llenín, J.A., Pellinen, T.K., and Abraham, D.M., 2006. Construction management of a small-scale accelerated pavement testing facility. Journal of Performance of Constructed Facilities, 20 (3), 229–236.
   Web of Science ®Google Scholar
• Lv, S., et al., 2020. Development of fatigue damage model of asphalt mixtures based on small-scale accelerated pavement test. Construction and Building Materials, 260, 119930.
   Web of Science ®Google Scholar
• Mallick, R.B., and El-Korchi, T., 2023. Pavement engineering: principles and practice. 4th Edition. Boca Raton: CRC Press.
   Google Scholar
• Martin, T., and Choummanivong, L., 2016. The benefits of long-term pavement performance (LTPP) research to funders. Transportation Research Procedia, 14, 2477–2486.
   Google Scholar
• Mclean, D.B., 1974. Permanent deformation characteristics of asphalt concrete. PhD thesis, Univerisity of California, Berkeley.
   Google Scholar
• Mejías-Santiago, M., Doyle, J.D., and Rushing, J.F., 2015. Performance of grooved warm-mix asphalt pavement surfaces under heavy aircraft load and high tire pressure. Transportation Research Record, 2501 (1), 40–45.
   Google Scholar
• Meng, F.-Y., et al., 2021. Centrifuge modeling of ground and tunnel responses to nearby excavation in soft clay. Journal of Geotechnical and Geoenvironmental Engineering, 147 (3), 04020178.
   Web of Science ®Google Scholar
• Miller, J.S., and Bellinger, W.Y., 2003. Distress identification manual for the long-term pavement performance program. United States. Federal Highway Administration. Office of Infrastructure.
   Google Scholar
• Nega, A., et al., 2015. Distress identification, cost analysis and pavement temperature prediction for the long-term pavement performance for Western Australia. International Journal of Engineering and Technology (IJET), 7 (4), 267–275.
   Google Scholar
• Neves, J., et al., 2023. Full-scale accelerated pavement testing and instrumentation. In: C. Chastre, et al., ed. Advances on testing and experimentation in civil engineering. Springer, 163–186.
   Google Scholar
• Peshkin, D.G., Hoerner, T.E., and Zimmerman, K.A., 2004. Optimal timing of pavement preventive maintenance treatment applications. Transportation Research Board.
   Google Scholar
• Read, J., and Whiteoak, D., 2003. The shell bitumen handbook. Thomas Telford.
   Google Scholar
• Schmalzer, Peter N., 2006. Long-term pavement performance program manual for falling weight deflectometer measurements. FHWA-HRT-06-132. United States. Federal Highway Administration. Office of Infrastructure Research and Development.
   Google Scholar
• Schofield, A.N., 1981. Dynamic and earthquake geotechnical centrifuge modelling. First International Conference on Recent Advances in Geotechnical Earthquake Engineering & Soil Dynamics. April 26 - May 3, 1981.St. Louis, Missouri.1081–1100.
   Google Scholar
• Shepson, O., 2009. Boeing and airbus tire pressure test programs. ed. ALACPA Airport Pavement Seminar and FAA Workshop.
   Google Scholar
• Suo, Z., and Wong, W.G., 2009. Analysis of fatigue crack growth behavior in asphalt concrete material in wearing course. Construction and Building Materials, 23 (1), 462–468.
   Web of Science ®Google Scholar
• Svasdisant, T., et al., 2002. Mechanistic analysis of top-down cracks in asphalt pavements. Transportation Research Record, 1809 (1), 126–136.
   Google Scholar
• Taylor, R.E., 2018. Geotechnical centrifuge technology. CRC Press.
   Google Scholar
• Ullidtz, P., et al., 2010. CalME, a mechanistic–empirical program to analyze and design flexible pavement rehabilitation. Transportation Research Record, 2153 (1), 143–152.
   Google Scholar
• Vamegh, M., Ameri, M., and Naeni, S.F.C., 2019. Performance evaluation of fatigue resistance of asphalt mixtures modified by SBR/PP polymer blends and SBS. Construction and Building Materials, 209, 202–214.
   Web of Science ®Google Scholar
• Wang, Y., Mahboub, K.C., and Hancher, D.E., 2005. Survival analysis of fatigue cracking for flexible pavements based on long-term pavement performance data. Journal of Transportation Engineering, 131 (8), 608–616.
   Web of Science ®Google Scholar
• Yaghoobzadeh, S., et al., 2021. Effect of EPS beads on the behavior of sand–EPS and slope stability using triaxial and centrifuge tests. International Journal of Civil Engineering, 19 (11), 1269–1282.
   Web of Science ®Google Scholar
• Yang, Z., et al., 2022. Study of the durability of a fully permeable asphalt pavement structure based on the accelerated pavement test method under saturated conditions. Journal of Transportation Engineering, Part B: Pavements, 148 (1), 04021081.
   Web of Science ®Google Scholar
• Zhang, Z., and Chian, S.C., 2019. Importance of sidewall friction on manhole uplift during soil liquefaction. Soil Dynamics and Earthquake Engineering, 119, 51–61.
   Web of Science ®Google Scholar
• Zimmerman, C., 2017. Effect of loading conditions on the magnitude and variation of pavement responses in accelerated loading testing. Airfield and Highway Pavements 2017. 119–133.
   Google Scholar