Load-Independent Power Losses of Fully Flooded Lubricated Tapered Roller Bearings: Numerical and Experimental Investigation of the Effect of Operating Temperature and Housing Wall Distances

References

• Zhang, S.-W. (2013), “Green Tribology: Fundamentals and Future Development,” Friction, 1, pp 186–194. doi:10.1007/s40544-013-0012-4
   Web of Science ®Google Scholar
• Arora, A., Jha, S., and Saini, V. (2019), “Aspects of Green-sustainable Tribology and Its Impacts on Future Product Development: A Review,” Ecology, Environment and Conservation, 25, pp S146–S157.
   Google Scholar
• Woydt, M. (2021), “The Importance of Tribology for Reducing CO2 Emissions and for Sustainability,” Wear, 474-475, pp 203768. doi:10.1016/j.wear.2021.203768
   Web of Science ®Google Scholar
• Hong, S. W., and Van-Canh Tong, V. C. (2016), “Rolling-Element Bearing Modeling: A Review,” International Journal of Precision Engineering and Manufacturing, 17, pp 1729–1749. doi:10.1007/s12541-016-0200-z
   Web of Science ®Google Scholar
• Zhao, Y., Zi, Y., Chen, Z., Zhang, M., Zhu, Y., and Yin, J. (2023), “Power Loss Investigation of Ball Bearings Considering Rolling-Sliding Contacts,” International Journal of Mechanical Sciences, 250, pp 108318. 10.1016/j.ijmecsci.2023.108318
   Web of Science ®Google Scholar
• Kerrouche, R., Dadouche, A., Mamou, M., and Boukraa, S. (2021), “Power Loss Estimation and Thermal Analysis of an Aero-engine Cylindrical Roller Bearing,” Tribology Transactions, 64, pp 1079–1094. doi:10.1080/10402004.2021.1958966
   Web of Science ®Google Scholar
• Feldermann, A., Fischer, D., Neumann, S., and Jacobs, G. (2017), “Determination of Hydraulic Losses in Radial Cylindrical Roller Bearings Using CFD Simulations,” Tribology International, 113, pp 245–251. doi:10.1016/j.triboint.2017.03.020
   Google Scholar
• Concli, F. (2017), “ Low-Loss Gears Precision Planetary Gearboxes: Reduction of the Load Dependent Power Losses and Efficiency Estimation through a Hybrid Analytical-Numerical Optimization Tool” [Hochleistungs-und Präzisions-Planetengetriebe: Effizienzschätzung und Reduzierung der lastabhängigen Leistungsverluste und durch ein hybrides analytisch-numerisches Optimierungswerkzeug],” Forschung im Ingenieurwesen, 81, pp 395–407. 10.1007/s10010-017-0242-0
   Web of Science ®Google Scholar
• Wang, M., Yan, K., Zhang, X., Zhu, Y., and Hong, J. (2023), “A Comprehensive Study on Dynamic Performance of Ball Bearing Considering Bearing Deformations and Ball-Inner Raceway Separation,” Mechanical Systems and Signal Processing, 185, pp 109826. doi:10.1016/j.ymssp.2022.109826
   Web of Science ®Google Scholar
• Yilmaz, M., Önüt, A., Lohner, T., and Stahl, K. (2022), “Gear and Bearing Power Losses: From Dip to Minimum Quantity Lubrication,” Industrial Lubrication and Tribology, 74, pp 985–994. doi:10.1108/ILT-08-2021-0349
   Web of Science ®Google Scholar
• Bakolas, V., Roedel, P., Koch, O., and Pausch, M. (2021), “A First Approximation of the Global Energy Consumption of Ball Bearings,” Tribology Transactions, 64, pp 883–890. doi:10.1080/10402004.2021.1946227
   Web of Science ®Google Scholar
• Kim, K.-S., Lee, D.-W., Lee, S.-M., Lee, S.-J., and Hwang, J.-H. (2015), “A Numerical Approach to Determine the Frictional Torque and Temperature of an Angular Contact Ball Bearing in a Spindle System,” International Journal of Precision Engineering and Manufacturing, 16, pp 135–142. doi:10.1007/s12541-015-0017-1
   Web of Science ®Google Scholar
• Han, C., Yu, C., Li, Y., Yan, J., and Zhang, J. (2015), “Mechanical Performance Analysis of Hollow Cylindrical Roller Bearing of Cone Bit by FEM,” Petroleum, 1, pp 388–396. doi:10.1016/j.petlm.2015.10.012
   Google Scholar
• Qiu, M., Chen, L., Li, Y., and Yan, J. (2017), Rolling Bearing Lubrication Theory, pp 145–185, Springer. Berlin. doi:10.1007/978-3-662-53097-9_6
   Google Scholar
• Gonda, A., Großberndt, D., Sauer, B., and Schwarze, H. (2018), “Experimentelle und numerische Untersuchungen der hydraulischen Verluste in Wälzlagern unter praxisrelevanten Bedingungen” [Experimental and numerical investigations of hydraulic losses in rolling bearings under practice-oriented conditions],” Tribologie Und Schmierungstechnik, 65, pp 7–13.
   Google Scholar
• Gonda, A., Sauer, B., Großberndt, D., and Schwarze, H. (2018), “Experimental and Numerical Investigation of Hydraulic Losses in Rolling Bearings.” Tribologie Und Schmierungstechnik, 65, pp 7–13.
   Google Scholar
• Concli, F., Della Torre, A., Gorla, C., and Montenegro, G. (2016), “A New Integrated Approach for the Prediction of the Load Independent Power Losses of Gears: Development of a Mesh-Handling Algorithm to Reduce the CFD Simulation Time,” Advances in Tribology, 2016, pp 1–8. doi:10.1155/2016/2957151
   Google Scholar
• Liebrecht, J., Si, X., Sauer, B., and Schwarze, H. (2015), “Untersuchungen von hydraulischen Verlusten an Kegelrollenlagern” [Investigations of hydraulic losses in tapered roller bearings],” Tribologie Und Schmierungstechnik, 62, pp 14–21.
   Google Scholar
• Liebrecht, J., Si, X., Sauer, B., and Schwarze, H. (2017), “Berücksichtigung des Größeneinflusses bei der Berechnung der Plansch- und Schleppverluste an Wälzlagern” [Consideration of the Influence of size in the calculation of churning and drag losses on rolling bearings],” Tribologie Und Schmierungstechnik, 64, pp 46–52.
   Google Scholar
• SKFGROUP. (2018), Rolling Bearing Catalog PUB BU/P1 17000/1 EN.
   Google Scholar
• Liebrecht, J., Si, X., Sauer, B., and Schwarze, H. (2016), “Technisch-mathematischer Ansatz zur Berechnung der Plansch-und Strömungsverluste am Kegelrollenlager” [Technical-mathematical approach for the calculation of the flow and churning losses in tapered roller bearings],” Tribologie Und Schmierungstechnik, 63, pp 5–13.
   Google Scholar
• Maccioni, L., and Concli, F. (2020), “Computational Fluid Dynamics Applied to Lubricated Mechanical Components: Review of the Approaches to Simulate Gears, Bearings, and Pumps,” Applied Sciences (Switzerland), 10, pp 8810. doi:10.3390/app10248810
   Web of Science ®Google Scholar
• Marchesse, Y., Changenet, C., and Ville, F. (2019), “Drag Power Loss Investigation in Cylindrical Roller Bearings Using CFD Approach,” Tribology Transactions, 62, pp 403–411. doi:10.1080/10402004.2018.1565009
   Web of Science ®Google Scholar
• Gao, W., Zhang, S., Li, X., and Liu, Z. (2022), “Investigation on the Drag Effect of a Rolling Element Confined in the Cavity of a Cylindrical Roller Bearing,” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 236, pp 777–785. doi:10.1177/13506501211026063
   Web of Science ®Google Scholar
• Concli, F., Schaefer, C. T., and Bohnert, C. (2020), “Innovative Meshing Strategies for Bearing Lubrication Simulations,” Lubricants, 8, pp 46. doi:10.3390/LUBRICANTS8040046
   Web of Science ®Google Scholar
• Wen, Y., and Oshima, S. (2014), “Oil Flow Simulation Based on CFD for Reducing Agitation Torque of Ball Bearings,” SAE International Journal of Passenger Cars - Mechanical Systems, 7, pp 1385–1391. doi:10.4271/2014-01-2850
   Google Scholar
• Noda, T., Shibasaki, K., and Wang, Q. J. (2016), “X-ray CT Imaging of Grease Behavior in Ball Bearing and Multi-scale Grease Flows Simulation,” Proceedings of the Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition, pp 361–362.
   Google Scholar
• Noda, T., Shibasaki, K., Miyata, S., and Taniguchi, M. (2020), “X-ray CT Imaging of Grease Behavior in Ball Bearing and Numerical Validation of Multi-phase Flows Simulation,” Tribology Online, 15, pp 36–44. doi:10.2474/trol.15.36
   Web of Science ®Google Scholar
• Zhang, R., Wei, C., Wu, W., and Yuan, S. (2015), “CFD Investigation on the Influence of Jet Velocity of Oil-Jet Lubricated Ball Bearing on the Characteristics of Lubrication Flow Field,” 2015 International Conference on Fluid Power and Mechatronics (FPM), pp 1324–1328. doi:10.1109/FPM.2015.7337326
   Google Scholar
• Hu, J., Wu, W., Wu, M., and Yuan, S. (2014), “Numerical Investigation of the Air-Oil Two-Phase Flow inside an Oil-Jet Lubricated Ball Bearing,” International Journal of Heat and Mass Transfer, 68, pp 85–93. doi:10.1016/j.ijheatmasstransfer.2013.09.013
   Web of Science ®Google Scholar
• Deng, S., Zhao, G., Qian, D., Jiang, S., and Hua, L. (2022), “Investigation of Oil-Air Flow and Temperature for High-Speed Ball Bearings by Combining Nonlinear Dynamic and Computational Fluid Dynamics Models,” Journal of Tribology, 144, pp 071204. doi:10.1115/1.4052965
   Web of Science ®Google Scholar
• Chen, H., Liang, H., Wang, W., and Zhang, S. (2023), “Investigation on the Oil Transfer Behaviors and the Air-Oil Interfacial Flow Patterns in a Ball Bearing under Different Capillary Conditions,” Friction, 11, pp 228–245. doi:10.1007/s40544-021-0592-3
   Web of Science ®Google Scholar
• Li, M., Lu, F., Bai, X., Zhu, W., and Zhu, R. (2022), “Heat-Flow Coupling variation in Double-Row Tapered-Roller Bearings during the Loss of Lubrication Process,” Proceedings of the Institution of Mechanical Engineers, Part C, 236, pp 7500–7510. doi:10.1177/09544062221075185
   Web of Science ®Google Scholar
• Zhu, W., Zhu, R., Tang, X., Lu, F., Bai, X., Wu, X., and Li, F. (2022), “CFD-Based Analysis of Oil and Gas Two-Phase Flow Characteristics in Double-Row Tapered Roller Bearings with Different Rib Structures,” Applied Sciences (Switzerland), 12, pp 1156. doi:10.3390/app12031156
   Google Scholar
• Liebrecht, J., Si, X., Sauer, B., and Schwarze, H. (2015), “Investigation of Drag and Churning Losses on Tapered Roller Bearings,” Strojniški Vestnik – Journal of Mechanical Engineering, 61, pp 399–408. doi:10.5545/sv-jme.2015.2490
   Web of Science ®Google Scholar
• Gonda, A., Sauer, B., Großberndt, D., and Schwarze, H. (2019), “Experimentelle und numerische Untersuchungen der hydraulischen Verluste in voll-und teilgefluteten Kegelrollenlagern” [Experimental and numerical investigations of hydraulic losses in fully and partially fluted, tapered roller bearings],” VDI Berichte, 2348, pp 97–106.
   Google Scholar
• Maccioni, L., Chernoray, V. G., Mastrone, M. N., Bohnert, C., and Concli, F. (2022), “Study of the Impact of Aeration on the Lubricant Behavior in a Tapered Roller Bearing: Innovative Numerical Modelling and Validation via Particle Image Velocimetry,” Tribology International, 165, pp 107301. doi:10.1016/j.triboint.2021.107301
   Web of Science ®Google Scholar
• Maccioni, L., Chernoray, V. G., Bohnert, C., and Concli, F. (2022), “Particle Image Velocimetry Measurements Inside a Tapered Roller Bearing with an Outer Ring Made of Sapphire: Design and Operation of an Innovative Test Rig,” Tribology International, 165, pp 107313. doi:10.1016/j.triboint.2021.107313
   Web of Science ®Google Scholar
• Nieman, G., and Winter, H. (1989), Maschinenelemente, Band II: Getriebe allgemein, Zahnradgetriebe Grundlagen, Stirnradgetriebe, Springer: Berlin.
   Google Scholar
• Concli, F., Maccioni, L., and Gorla, C. (2019), “Lubrication of Gearboxes: CFD Analysis of a Cycloidal Gear Set,” WIT Transactions on Engineering Sciences, 123, pp 101–112. doi:10.2495/MPF190101
   Google Scholar
• Leibensperger, R. L. (1972), “An Analysis of the Flow of Oil through a Tapered Roller Bearing,” Journal of Lubrication Technology, 94, pp 125–130. doi:10.1115/1.3451652
   Google Scholar
• Gullberg, R. (2017), “Computational Fluid Dynamics in Openfoam,” Report No. TKP 4555. NTNU: Norwegian University of Science and Technology, Trondheim.
   Google Scholar
• Peterson, W., Russell, T., Sadeghi, F., Berhan, M.-T., Stacke, L. E., and Ståhl, J. (2021), “A CFD Investigation of Lubricant Flow in Deep Groove Ball Bearings,” Tribology International, 154, pp 106735. 10.1016/j.triboint.2020.106735
   Web of Science ®Google Scholar
• Concli, F., Gorla, C., Della Torre, A., and Montenegro, G. (2015), “Churning Power Losses of Ordinary Gears: A New Approach Based on the Internal Fluid Dynamics Simulations,” Lubrication Science, 27, pp 313–326. doi:10.1002/ls.1280
   Web of Science ®Google Scholar
• Majdoub, F., and Mevel, B. (2019), “Kinematic Equilibrium of Rollers in Tapered Roller Bearings,” Tribology Transactions, 62, pp 567–579. doi:10.1080/10402004.2018.1554171
   Web of Science ®Google Scholar
• SKF Calculation Tool, Available at: https://skfbearingselect.com/#/size-lubrication/single-bearing (accessed on date June 27, 2023).
   Google Scholar
• Schaeffler Calculation Tool, Available at: https://skfbearingselect.com/#/size-lubrication/single-bearing (accessed on date June 27, 2023).
   Google Scholar