Investigation of the Influence of Triboactive CrAlMoN Coating on the Joint Wear of Grease-Lubricated Roller Chains

References

• Holmberg, K., Kivikytö-Reponen, P., Härkisaari, P., Valtonen, K., and Erdemir, A. (2017), “Global Energy Consumption Due to Friction and Wear in the Mining Industry,” Tribology International, 115, pp 116–139. doi:10.1016/j.triboint.2017.05.010
   Web of Science ®Google Scholar
• Pfalzgraf, J. H. (2011), Experimentelle Reibleisuntgsuntersuchungen an Kettentrieben im Verbrennungsmotor, PhD thesis, TU München: München, Germany.
   Google Scholar
• Freidrich, F. (2006), Beitrag zur Entwicklung von neuen Traglaschenketten in der Fördertechnik, PhD thesis, TU Chemnitz: Chemnitz, Germany.
   Google Scholar
• Kemper, S. (2015), “Halmgutbergung,” Jahrbuch Agrartechnik 2014, 26(2014), pp 156–170. doi:10.24355/dbbs.084-201210110913-94
   Google Scholar
• Jagtap, M. D., Gaikwad, B. D., and Pawar, P. M. (2014), “Study of Roller Conveyor Chain Strip under Tensile Loading,” International Journal of Modern Engineering Research, 4, pp 2249–6645.
   Google Scholar
• Sappok, D. (2016), Experimentelle und simulative Methoden zur Untersuchung der Verschleißvorgänge im Kettengelenk von Antriebs- und Steuerketten, PhD thesis, Technische Universität Kaiserslautern: Kaiserslautern, Germany.
   Google Scholar
• Polat, O., Ebrinc, A. A., Ozen, C. and Akca, S. (2009), “Timing Chain Wear Assessment with Different Type of Oils,” Paper presented at the SAE World Congress & Exhibition, Detroit, April 20–23, 2009, Society of Automotive Engineers (SAE): Warrendale, PA, pp. 2009-01-0198. doi:10.4271/2009-01-0198
   Google Scholar
• German Institute for Standardization. (2006), Guidelines for the Selection of Roller Chain Drives. ISO 10823, German Institute for Standardization: Berlin, Germany.
   Google Scholar
• Deters, L. and Mücke, W. (2018), Zugmittelgetriebe, Springer: Berlin, Germany. doi:10.1007/978-3-642-39503-1_7
   Google Scholar
• Bauer, P. (2013), Kettensteuertriebe. Stand der Technik, Anwendungen, Entwicklung und Herstellung, SZ Scala GmbH: München, Germany.
   Google Scholar
• Rosenkranz, A., Krupp, F., Reinert, L., Mücklich, F., and Sauer, B. (2017), “Tribological Performance of Laser-Patterned Chain Links—Influence of Pattern Geometry and Periodicity,” Wear, 370–371, pp 51–58. doi:10.1016/j.wear.2016.11.006
   Web of Science ®Google Scholar
• Buhl, S., Schmidt, K., Sappok, D., Merz, R., Godard, C., Kerscher, E., Kopnarski, M., Sauer, B., Antonyuk, S., and Ripperger, S. (2015), “Surface Structuring of Case Hardened Chain Pins by Cold-Sprayed Microparticles to Modify Friction and Wear Properties,” Particuology, 21, pp 32–40. doi: 10.1016/j.partic.2014.10.001
   Web of Science ®Google Scholar
• Becker, A. (2020), Entwicklung einer Prüfmethodik für Verschleißuntersuchungen an Kettengelenken von Antriebs- und Steuerketten, PhD thesis, TU Kaiserslautern: Kaiserslautern, Germany.
   Google Scholar
• Zhang, A., Wang, J., Han, Y., Zhang, J., and Liu, Y. (2022), “Effect of Pin Generatrix on the Elastohydrodynamic Lubrication Performance of Pin–Bush Pair in Industrial Roller Chains,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 236(8), pp 1545–1553. doi:10.1177/13506501211065954
   Web of Science ®Google Scholar
• Krupp, F. (2019), Untersuchungen zur Reibleistungsreduzierung in Steuerkettentrieben, PhD thesis, Technische Universität Kaiserslautern: Kaiserslautern, Germany.
   Google Scholar
• Coenen, W. (1984), Einfluss der Schmierung auf das Verschleißverhalten von Rollenketten, PhD thesis, RWTH Aachen: Aachen, Germany.
   Google Scholar
• Bobzin, K., Brögelmann, T., Kalscheuer, C., Kühnert, B., and Baumann, M. (2019), “Triboaktive (Cr,Al,Mo)N- und (Cr,Al,Mo,Cu)N-Beschichtungen für Steuerkettenanwendungen,” Paper presented at Tagungsband zur Tribologie Fachtagung der Gesellschaft für Tribologie e.V. (GfT), Göttingen, Septmeber 23–25, 2019, Gesellschaft für Tribologie e.V.: Aachen, Germany.
   Google Scholar
• Meffert, D., Oehler, M., and Sauer, B. (2021), “Precise Friction Measurement in Drive Chains Using a Chain Joint Tribometer,” Tribology Online, 16(3), pp 151–158. doi:10.2474/trol.16.151
   Web of Science ®Google Scholar
• Becker, A., Meffert, D., and Sauer, B. (2019), “Friction and Wear Investigations on Single Chain Joints,” Forschung im Ingenieurwesen, 83(1), pp 53–63. doi:10.1007/s10010-019-00297-x
   Web of Science ®Google Scholar
• Bobzin, K., Kalscheuer, C., and Thiex, M. (2021), “Understanding the Tribological Behavior of Graded (Cr,Al)N + Mo:S in Fluid-Free Friction Regime,” Tribology Letters, 69(4), pp 162. doi:10.1007/s11249-021-01536-5
   Web of Science ®Google Scholar
• Bobzin, K., Kalscheuer, C., Thiex, M., Stahl, K., Lohner, T., Maier, E., and Yilmaz, M. (2022), “Adaptive (Cr,Al)N + Mo:Sg Coating for Highly‐Stressed Contacts under Dry Rolling‐Sliding Conditions,” Tribology International, 174, pp 107761. doi:10.1016/j.triboint.2022.107761
   Web of Science ®Google Scholar
• Bobzin, K., Brögelmann, T., Kalscheuer, C., Stahl, K., Lohner, T., and Yilmaz, M. (2019), “(Cr,Al)N and (Cr,Al,Mo)N Hard Coatings for Tribological Applications under Minimum Quantity Lubrication,” Tribology International, 140, pp 105817b. doi:10.1016/j.triboint.2019.06.010
   Web of Science ®Google Scholar
• Bobzin, K., Kalscheuer, C., Möbius, M. P., Rank, M., Oehler, M., and Koch, O. (2023), “Triboactive Coatings for Wear and Friction Reduction in Chain Drives,” Tribology International, 185, pp 108562. doi:10.1016/j.triboint.2023.108562
   Web of Science ®Google Scholar
• German Institute for Standardization. (2018), Short-Pitch Transmission Precision Roller and Bush Chains, Attachments and Associated Chain Sprockets. ISO 606, German Institute for Standardization: Berlin, Germany.
   Google Scholar
• German Institute for Standardization. (1981), Lubricants; Consistency Classification of Lubricating Greases; NLGI Grades. 51818, German Institute for Standardization: Berlin, Germany.
   Google Scholar
• Becker, A., and Sauer, B. (2019), “Verschleiß- und Reibungsuntersuchungen am Bolzen-Hülsen-Kontakt von Steuerketten mit einem Einzelgelenkprüfstand,” Tribologie und Schmierungstechnik, 66(3), pp 48–55. doi:10.30419/TuS-2019-0018
   Google Scholar
• Rank, M., Meffert, D., Oehler, M., and Koch, O. (2022), “Einfluss von Beschichtungen zur triboaktiven Transferschichtbildung auf die Reibung in Kettengelenken,” Tribologie und Schmierungstechnik, 69(5–6), pp 5–12. doi:10.24053/TuS-2022-0039
   Google Scholar
• Becker, A., Krupp, F., and Sauer, B. (2017), “Systematische Verschleißuntersuchungen an Kettenkomponenten.” Paper presented at Tagungsband zur Tribologie Fachtagung der Gesellschaft für Tribologie e.V. (GfT), Göttingen, September 24–26, 2017, Gesellschaft für Tribologie e.V.: Aachen, Germany.
   Google Scholar
• Simo Kamga, L., Meffert, D., Magyar, B., Oehler, M., and Sauer, B. (2022), “Simulative Investigation of the Influence of Surface Texturing on the Elastohydrodynamic Lubrication in Chain Joints,” Tribology International, 171, pp 107564. doi: 10.1016/j.triboint.2022.107564
   Web of Science ®Google Scholar
• Sappok, D., and Sauer, B. (2015), “Wear Measurement on Chain Joint Components Using a Roundness Instrument,: Periodica Polytechnica Mechanical Engineering, 59(2), pp 51–59. doi:10.3311/PPme.7780
   Google Scholar
• Sappok, D., Merz, R., Sauer, B., and Kopnarski, M. (2015), “Surface Analysis of Chain Joint Components after Tribological Load and Usage of Antiwear Additives,” Conference Papers in Science, Karlsruhe, Germany, May 6–8, 2014, Dienwiebel, M. (Ed.), Hindawi Publishing Corporation: London, United Kingdom, pp 407048. doi:10.1155/2015/407048
   Google Scholar
• Hossain, M. M., Minkwitz, R., Charoensirisomboon, P., and Sue, H.-J. (2014), “Quantitative Modeling of Scratch-Induced Deformation in Amorphous Polymers,” Polymer, 55(23), pp 6152–6166. doi:10.1016/j.polymer.2014.09.045
   Web of Science ®Google Scholar