Effect of Mo Content on Friction and Wear Properties of Fe-Mn-Al-C Alloys Under Different Working Conditions

References

• Zhang, Z. Q., Tian, J., Li, J. T., et al. (2022), “The Development of Diesel Oxidation Catalysts and the Effect of Sulfur Dioxide on Catalysts of Metal-Based Diesel Oxidation Catalysts. A Review,” Fuel Processing Technology, 233, p 107317. 10.1016/j.fuproc.2022.107317
   Web of Science ®Google Scholar
• Rao, X., Sheng, C. X., Guo, Z. W., et al. (2022), “A Review of Online Condition Monitoring and Maintenance Strategy for Cylinder Liner–Piston Rings of Diesel Engines,” Mechanical Systems and Signal Processing, 165, p 108385. 10.1016/j.ymssp.2021.108385
   Web of Science ®Google Scholar
• Dudareva, N. Y., Enikeev, R. D., and Ivanov, V. Y. (2017), “Thermal Protection of Internal Combustion Engines Pistons,” Procedia Engineering, 206, 1382–1387. 10.1016/j.proeng.2017.10.649
   Google Scholar
• Qin, Z. J., Jia, C. F., Zhang, W. Z., and Wang L. J. (2018), “Investigations on Ablation for Highly-Intensified Diesel Engine Piston Material,” Case Studies in Thermal Engineering, 13, p 100371. 10.1016/j.csite.2018.100371
   Web of Science ®Google Scholar
• Lyu, F., Zhang, J. H., Sun, G. M., et al. (2020), “Research on Wear Prediction of Piston/Cylinder Pair in Axial Piston Pumps,” Wear, 456–457, p 203338. 10.1016/j.wear.2020.203338
   Web of Science ®Google Scholar
• Meng, Y., Xu, J., Jin, Z., et al. (2020), “A Review of Recent Advances in Tribology,” Friction, 8, pp 221–300. 10.1007/s40544-020-0367-2
   Web of Science ®Google Scholar
• Wakiru, M., Pintelon, L., Muchiri, N., et al. (2019), “A Review on Lubricant Condition Monitoring Information Analysis for Maintenance Decision Support,” Mech. Syst. Signal Process, 118, 108–132. 10.1016/j.ymssp.2018.08.039
   Web of Science ®Google Scholar
• Fan, B., Feng, S., Che, Y., et al. (2018), “An Oil Monitoring Method of Wear Evaluation for Engine Hot Tests,” Int. J. Adv. Manuf. Technol., 94, pp 3199–3207. 10.1007/s00170-016-9473-8
   Web of Science ®Google Scholar
• Cao, W., Dong, G., Chen, W., et al. (2015), “Multisensor Information Integration for Online Wear Condition Monitoring of Diesel Engines,” Tribol. Int., 82, pp 68–77. 10.1016/j.triboint.2014.09.020
   Web of Science ®Google Scholar
• Wakiru, J., Pintelon, L., Chemweno, P., et al. (2017), “A Lubricant Condition Monitoring Approach for Maintenance Decision Support—A Data Exploratory Case Study,” Maint. Forum, 2017, 69–82.
   Google Scholar
• Kumar, S., Mukhejee, P. S., and Mishra, N. M. (2005), “Online Condition Monitoring of Engine Oil,” Ind. Lubr. Tribol., 57, pp 260–267. 10.1108/00368790510622362
   Web of Science ®Google Scholar
• Bharat, N., and Bose, P. S. C. (2021), “An Overview on the Effect of Reinforcement and Wear Behaviour of Metal Matrix Composites,” Materials Today: Proceedings. 10.1016/j.matpr.2020.12.084
   Google Scholar
• Ferreira, R., Martins, J., Carvalho, S., et al. (2020), “Tribological Solutions for Engine Piston Ring Surfaces: An Overview on the Materials and Manufacturing,” Mater. Manuf. Process, 35, pp 498–520. 10.1080/10426914.2019.1692352
   Web of Science ®Google Scholar
• Richardson, D. (2000), “Review of Power Cylinder Friction for Diesel Engines,” Trans. ASME: J. Eng. Gas Turbines Power, 122, pp 506–519. 10.1115/1.1290592
   Web of Science ®Google Scholar
• Tung, S. C., and McMillan, M. L. (2004), “Automotive Tribology Overview of Current Advances and Challenges for the Future,” Tribol. Int., 37, pp 517–536. 10.1016/j.triboint.2004.01.013
   Web of Science ®Google Scholar
• Wei, P., Wu, Z. Y., Xu, Y. L., et al. (2017), “Internal Oxidation Behaviour of Fe-Mn-Al-C Duplex Light-Weight Steels With Good Combination of Strength and Ductility,” Corrosion Science, 120(0), pp 148–157. 10.1016/j.corsci.2017.03.005
   Google Scholar
• Ding, H., and Wu, Z. Q. (2017), “Microstructural Evolution and Mechanical Behavior of Low-Density Fe-Mn-Al-C Steels with High Stacking Fault Energy,” Materials Science Forum, 879(01), pp 436–441. 10.4028/www.scientific.net/MSF.879.436
   Google Scholar
• Piercem D. T., Jiménez, J. A., Bentley, J., Raabe, D., and Wittig, J. E. (2015), “The Influence of Stacking Fault Energy on the Microstructural and Strain-Hardening Evolution of Fe-Mn-Al-Si Steels During Tensile Deformation,” Acta Materialia, 100(2), pp 178–190. 10.1016/j.actamat.2015.08.030
   Google Scholar
• Shyamal, S., Das, S. R., Jaskari, M., et al. (2020), “Graded Deformation in an Fe-Mn-Al-C Steel Under Bending Fatigue,” Materials Letters, 285(036), p 129002. 10.1016/j.matlet.2020.129002
   Google Scholar
• Wang, Y. X., and Lou, B. Y. (2021), “Microstructure and High-Temperature Friction and Wear Properties of CrAlMoN Film,” Oxidation of Metals, 95(4), pp 239–250. 10.1007/s11085-021-10021-2
   Web of Science ®Google Scholar
• Zhang, H., Deng, X. C., and Zhang, G. H. (2023), “Preparation and Properties of Multiphase Solid-Solution Strengthened High-Performance W-Cu Alloys Through Alloying With Mo, Fe and Ni,” Materials Science and Engineering: A, 871(26), p 144909. 10.1016/j.msea.2023.144909
   Google Scholar
• Ma, Z., Zhang, Y. H., Mu, L. T., et al. (2023), “Effects of Mo Alloying on the Microstructure and Wear Resistance of Fe–B Surfacing Alloys,” Journal of Materials Research and Technology, 23, pp 6162–6175. 10.1016/j.jmrt.2023.02.187
   Google Scholar
• Kong, L. Q., Bi, Q. L., Zhu, S. Y., et al. (2012), “Tribological Properties of ZrO2(Y2O3)-Mo-BaF2/CaF2 Composites at High Temperatures,” Tribology International, 45(1), pp 43–49. 10.1016/j.triboint.2011.09.008
   Web of Science ®Google Scholar
• Zhang, Y. S., Hu, L. T., Chen, J. M., et al. (2010), “Lubrication Behavior of Y-TZP/Al2O3/Mo Nanocomposites at High Temperature,” Wear, 268(9), pp 1091–1094. 10.1016/j.wear.2010.01.009
   Web of Science ®Google Scholar
• Fang, Y., Zhang, Y., Song, J., et al. (2014), “Influence of Structural Parameters on the Tribological Properties of Al2O3/Mo Laminated Nanocomposites,” Wear, 320, pp 152–160. 10.1016/j.wear.2014.09.003
   Web of Science ®Google Scholar
• Bai, Y. P., Liu, M. M., Li, J. P., et al. (2020), “Tribofilm Formation on the VN/7075 Composite Surface Under Sulfur-Containing Boundary Lubrication,” Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, 234(11), p 135065012093016.
   Web of Science ®Google Scholar
• Jiao, D. D. (2022), “Study on Preparation, Microstructure and Mechanical Behavior of Lightweight and High Strength Fe-Mn-Al Alloy,” Xi’an Technological University (in Chinese).
   Google Scholar
• Lin, S. J., Xiong, W. H., and Huang, Y. Z. (2011), “Effect of Mo on Microstructure and Properties of TiC/316L Stainless Steel Composites,” Material Science and Engineering of Powder Metallurgy, 16(5), p 7 (in Chinese).
   Google Scholar
• Baskara Sethupathi, P., and Chandradass, J. (2021), “Comparative Study of Different Solid Lubricants Towards Friction Stability in a Non-Asbestos Disc Brake Pad,” Industrial Lubrication and Tribology, 73(6), pp 897–903. 10.1108/ILT-04-2021-0147
   Web of Science ®Google Scholar
• Li, R. R., Yin, Y. G., Zhang, K. Y., et al. (2022), “Effects of Ball Milling and Load on Transfer Film Formation of Copper-Based Composites,” Industrial Lubrication and Tribology, 74(9), pp 1056–1062. 10.1108/ILT-04-2022-0119
   Web of Science ®Google Scholar
• Zhang, K. Y., Yin, Y. G., Zhang, G. T., et al. (2020),”Tribological Properties of FeS-Cu Copper-Based Self-Lubricating Bearing Materials Prepared by Mechanical Alloying,” Tribology Transactions, 63(2), pp 197–204.
   Web of Science ®Google Scholar