Polymeric Coatings With Superior Tribological Performance for Lightweight Materials in HFO-1234yf Refrigerant

References

• Kim, M.-H., Pettersen, J., and Bullard, C. W. (2004), "Fundamental Process and System Design Issues in CO2 vapor Compression Systems," Progress in Energy and Combustion Science, 30(2), pp 119–174. 10.1016/j.pecs.2003.09.002
   Web of Science ®Google Scholar
• Breidenich, C., Magraw, D., Rowley, A., and Rubin, J. W. (1998), "The Kyoto Protocol to the United Nations Framework Convention on Climate Change," American Journal of International Law, 92(2), pp 315–331. 10.2307/2998044
   Web of Science ®Google Scholar
• Nunez, E. E., Demas, N. G., Polychronopoulou, K., and Polycarpou, A. A. (2010), "Comparative Scuffing Performance and Chemical Analysis of Metallic Surfaces for Air-Conditioning Compressors in the Presence of Environmentally Friendly CO2 Refrigerant," Wear, 268(5–6), pp 668–676. 10.1016/j.wear.2009.11.002
   Web of Science ®Google Scholar
• Nunez, E. E., Polychronopoulou, K., and Polycarpou, A. A. (2010), "Lubricity Effect of Carbon Dioxide Used as an Environmentally Friendly Refrigerant in Air-Conditioning and Refrigeration Compressors," Wear, 270(1–2), pp 46–56. 10.1016/j.wear.2010.09.005
   Web of Science ®Google Scholar
• Demas, N. G., Polycarpou, A. A., and Conry, T. F. (2005), "Tribological Studies on Scuffing due to the Influence of Carbon Dioxide Used as a Refrigerant in Compressors," Tribology Transactions, 48(3), pp 336–342. 10.1080/05698190590970525
   Web of Science ®Google Scholar
• Vallero, D. A. (2019), "Air Pollution Biogeochemistry," Air Pollution Calculations, 175–206.
   Google Scholar
• Minor, B., and Spatz, M. (2008), "HFO-1234yf Low GWP Refrigerant Update," International Refrigeration and Air Conditioning Conference, paper 937.
   Google Scholar
• Spatz, M., and Minor, B. (XXX), "HFO-1234yf. A Low GWP Refrigeration for MAC," SAE World Congress, Detroit, MI, p 14.
   Google Scholar
• Koban, M. (2010), "Automotive Material Investigation With Low GWP Refrigerant HFO-1234yf," Vehicle Thermal Management System.
   Google Scholar
• Benouali, J., and Iljima, K., eds. (2008), "HFO-1234yf Refrigerant Development," Proceedings of the International Symposium on New Refrigerants and Environmental Technology.
   Google Scholar
• David, L. M., Barth, M., Höglund-Isaksson, L., Purohit, P., Velders, G. J., Glaser, S., et al. (2021), "Trifluoroacetic Acid Deposition From Emissions of HFO-1234yf in India, China, and the Middle East," Atmospheric Chemistry and Physics, 21(19), pp 14833–14849. 10.5194/acp-21-14833-2021
   Web of Science ®Google Scholar
• Gadow, R., and Scherer, D. (2022), "Composite Coatings With Dry Lubrication Ability on Light Metal Substrates," Surface and Coatings Technology, 151, pp 471–477. 10.1016/S0257-8972(01)01636-X
   Google Scholar
• Solzak, T. A., and Polycarpou, A. A. (2006), "Tribology of WC/C Coatings for Use in Oil-Less Piston-Type Compressors," Surface and Coatings Technology, 201(7), pp 4260–4265. 10.1016/j.surfcoat.2006.08.087
   Web of Science ®Google Scholar
• Yamane, M., Stolarski, T. A., and Tobe, S. (2007), "Wear and Friction Mechanism of PTFE Reservoirs Embedded Into Thermal Sprayed Metallic Coatings," Wear, 263(7–12), pp 1364–74. 10.1016/j.wear.2006.11.027
   Google Scholar
• Harris, K. L., Pitenis, A. A., Sawyer, W. G., Krick, B. A., Blackman, G. S., Kasprzak, D. J., et al. (2015), "PTFE Tribology and the Role of Mechanochemistry in the Development of Protective Surface Films," Macromolecules, 48(11), pp 3739–3745. 10.1021/acs.macromol.5b00452
   Web of Science ®Google Scholar
• Blanchet, T., and Kennedy, F. (1992), "Sliding Wear Mechanism of Polytetrafluoroethylene (PTFE) and PTFE Composites," Wear, 153(1), pp 229–43. 10.1016/0043-1648(92)90271-9
   Web of Science ®Google Scholar
• Conte, M., and Igartua, A. (2012), "Study of PTFE Composites Tribological Behavior," Wear, 296(1–2), pp 568–574. 10.1016/j.wear.2012.08.015
   Web of Science ®Google Scholar
• Wang, Y., and Yan, F. (2006), "Tribological Properties of Transfer Films of PTFE-Based Composites," Wear, 261(11–12), pp 1359–1366. 10.1016/j.wear.2006.03.050
   Web of Science ®Google Scholar
• Burris, D. L., and Sawyer, W. G. (2007), "Tribological Behavior of PEEK Components With Compositionally Graded PEEK/PTFE Surfaces," Wear, 262(1–2):220–224. 10.1016/j.wear.2006.03.045
   Web of Science ®Google Scholar
• Lancaster, J. (1979), "Accelerated Wear Testing of PTFE Composite Bearing Materials," Tribology International, 12(2), pp 65–75. 10.1016/0301-679X(79)90004-5
   Web of Science ®Google Scholar
• Bahadur, S., and Tabor, D. (1984), "The Wear of Filled Polytetrafluoroethylene," Wear, 98, pp 1–13. 10.1016/0043-1648(84)90213-8
   Web of Science ®Google Scholar
• Li, F., Yan, F.-y., Yu, L.-g., and Liu, W.-m. (2000), "The Tribological Behaviors of Copper-Coated Graphite Filled PTFE Composites," Wear, 237(1), pp 33–38. 10.1016/S0043-1648(99)00303-8
   Web of Science ®Google Scholar
• Tharajak, J., Palathai, T., and Sombatsompop, N. (2017), "Recommendations for h-BN Loading and Service Temperature to Achieve Low Friction Coefficient and Wear Rate for Thermal-Sprayed PEEK Coatings," Surface and Coatings Technology, 321, pp 477–483. 10.1016/j.surfcoat.2017.05.022
   Web of Science ®Google Scholar
• Stolarski, T. (1992), "Tribology of Polyetheretherketone," Wear, 158(1–2), pp 71–78. 10.1016/0043-1648(92)90031-3
   Web of Science ®Google Scholar
• Frich, D., Goranov, K., Schneggenburger, L., and Economy, J. (1996), "Novel High-Temperature Aromatic Copolyester Thermosets: Synthesis, Characterization, and Physical Properties," Macromolecules, 29(24), pp 7734–7739. 10.1021/ma960862d
   Web of Science ®Google Scholar
• Lan, P., Meyer, J. L., Economy, J., and Polycarpou, A. A. (2016), "Unlubricated Tribological Performance of aromatic Thermosetting Polyester (ATSP) Coatings Under Different Temperature Conditions," Tribology Letters, 61(1), pp 1–14. 10.1007/s11249-015-0621-3
   Web of Science ®Google Scholar
• Lan, P., Meyer, J. L., Vaezian, B., and Polycarpou, A. A. (2016), "Advanced Polymeric Coatings for Tilting Pad Bearings With Application in the Oil and Gas Industry," Wear, 354, pp 10–20. 10.1016/j.wear.2016.02.013
   Web of Science ®Google Scholar
• Akram, M. W., Meyer, J. L., and Polycarpou, A. A. (2016), "Tribological Interactions of Advanced Polymeric Coatings With Polyalkylene Glycol Lubricant and r1234yf Refrigerant," Tribology International, 97, pp 200–211. 10.1016/j.triboint.2016.01.026
   Web of Science ®Google Scholar
• Lan, P., Polychronopoulou, K., Zhang, Y., and Polycarpou, A. A. (2017), "Three-Body Abrasive Wear by (Silica) Sand of Advanced Polymeric Coatings for Tilting Pad Bearings," Wear, 382, pp 40–50. 10.1016/j.wear.2017.04.002
   Web of Science ®Google Scholar
• Lan, P., and Polycarpou, A. A. (2018), "High Temperature and High Pressure Tribological Experiments of Advanced Polymeric Coatings in the Presence of Drilling Mud for Oil & Gas Applications," Tribology International, 120, pp 218–225. 10.1016/j.triboint.2017.12.035
   Web of Science ®Google Scholar
• Nunez, E. E., Yeo, S. M., and Polycarpou, A. A. (2010), "Tribological Behavior of PTFE, PEEK, and Fluorocarbon-Based Polymeric Coatings Used in Air-Conditioning and Refrigeration Compressors."
   Google Scholar
• Yoon, H., Sheiretov, T., and Cusano, C. (1998), "Tribological Evaluation of Some Aluminum-Based Materials in Lubricant/Refrigerant Mixtures," Wear, 218(1), pp 54–65. 10.1016/S0043-1648(98)00195-1
   Web of Science ®Google Scholar
• Yoon, H., Sheiretov, T., and Cusano, C. (2000), "Scuffing Behavior of 390 Aluminum Against Steel Under Starved Lubrication Conditions," Wear, 237(2), pp 163–175. 10.1016/S0043-1648(99)00321-X
   Web of Science ®Google Scholar
• Demas, N. G., and Polycarpou, A. A. (2008), "Tribological Performance of PTFE-Based Coatings for Air-Conditioning Compressors," Surface and Coatings Technology, 203(3–4), pp 307–316. 10.1016/j.surfcoat.2008.09.001
   Web of Science ®Google Scholar
• Bashandeh, K., Lan, P., and Polycarpou, A. A. (2022), "Abrasive Wear of PEEK and ATSP-Based Polymer Composite Coatings Under Lunar Regolith Conditions," Wear, 506, p 204461. 10.1016/j.wear.2022.204461
   Web of Science ®Google Scholar
• Economy, J., Polycarpou, A., and Meyer, J. (2017), "Polymer Coating System for Improved Tribological Performance," Google Patents.
   Google Scholar
• Bashandeh, K., Marchert, A., Takayuki, U., Polycarpou, A. A., Meyer, J., and Lan, P. (2021), "The Effect of Surface Texturing on Thin Film Reversible Adhesive Bond Strength," International Journal of Adhesion and Adhesives, 107, p 102829. 10.1016/j.ijadhadh.2021.102829
   Web of Science ®Google Scholar
• Dascalescu, D., Polychronopoulou, K., and Polycarpou, A. (2009), "The Significance of Tribochemistry on the Performance of PTFE-Based Coatings in CO2 Refrigerant Environment," Surface and Coatings Technology, 204(3), pp 319–329. 10.1016/j.surfcoat.2009.07.042
   Web of Science ®Google Scholar
• Bashandeh, K., Lan, P., and Polycarpou, A. A. (2019), "Tribological Performance Improvement of Polyamide Against Steel Using Polymer Coating," Tribology Transactions, 62(6), pp 1051–1062. 10.1080/10402004.2019.1643517
   Web of Science ®Google Scholar