Investigation on the Dynamic Pressure Effect of Clearance Oil Film at a Stepped Hydrostatic Thrust Bearing Working in Heavy Loading Duty

Reference

• Razzaque, M. M., and Hossain, M. Z. (2015), “Effects of Grooving in a Hydrostatic Circular Step Thrust Bearing with Porous Facing,” Journal of Tribology-Trans. ASME, 137(3), pp. 031703–031713.
   Web of Science ®Google Scholar
• Hossain, M. Z., and Razzaque, M. M. (2014), “Load Capacity of a Grooved Circular Step Thrust Bearing,” Journal of Tribology-Trans. ASME, 136(1), pp. 011705–011713. 10.1115/1.4025549
   Web of Science ®Google Scholar
• Liu, Y. M., Cao, Z. F., Zhang, Y., Wang, D. W., Wang, X. M., and Sun, C. Z. (2022), “Design and Research of Symmetrical Multi-Throttle Thrust Hydrostatic Bearing Based on Comparative Analysis of Various Meshes,” Symmetry-Basel, 14(2), pp. 1–14. 10.3390/sym14020351
   Web of Science ®Google Scholar
• Johnson, R. E. and Manring, N. D. (2005), “Translating Circular Thrust Bearings,” Journal of Fluid Mechanics, 530, pp. 197–212. 10.1017/S0022112005003782
   Web of Science ®Google Scholar
• Tripkewitz, F.A., Fritz, M., and Weigold, M. (2021), “Experimental Study on Tilting Stiffness of Oil Hydrostatic Shallow Recess Thrust Bearings,” MM Science Journal, 2021, pp. 5000–5007. 10.17973/MMSJ.2021_11_2021141
   Google Scholar
• Kodnyanko, V., Kurzakov, A., Grigorieva, O., Brungardt, M., Belyakova, S., Gogol, L., Surovtsev, A., and Strok, L. (2021), “Theoretical Disquisition on the Static and Dynamic Characteristics of an Adaptive Stepped Hydrostatic Thrust Bearing with a Displacement Compensator,” Mathematics, 9(22), pp. 1–19. 10.3390/math9222949
   Web of Science ®Google Scholar
• Kodnyanko, V., Belyakova, S., Grigorieva, O., Grigorieva, O., Gogol, L., Surovtsev, A., and Strok, L. (2021), “The Use of a Displacement Compensator for Improve the Static Characteristics of a Step Hydrostatic Thrust Bearing,” Journal of Mechanical Engineering Research, 7, pp. 11–16.
   Google Scholar
• Anthony, J., and Elamparithi, S. (2023), “Effect of MHD and Surface Roughness on Porous Step-Slider Bearing Lubricated with Couple-Stress Fluid,” International Journal of Heat and Technology, 41(1), pp. 135–142. 10.18280/ijht.410114
   Web of Science ®Google Scholar
• Naduvinamani, N., and Angadi, A. (2022), “Static and Dynamic Characteristics of Rough Porous Rayleigh Step Bearing Lubricated with Couple Stress Fluid,” Lubricants, 10(10), pp. 1–19 . 10.3390/lubricants10100257
   Web of Science ®Google Scholar
• Lin, J. R. (1999), “Static and Dynamic Characteristics of Externally Pressurized Circular Step Thrust Bearings Lubricated with Couple Stress Fluids,” Tribology International, 32(4), pp. 207–216. 10.1016/S0301-679X(99)00034-1
   Web of Science ®Google Scholar
• Lin, J. R. (2000), “Surface Roughness Effect on the Dynamic Stiffness and Damping Characteristics of Compensated Hydrostatic Thrust Bearings,” International Journal of Machine Tools and Manufacture, 40(11), pp. 1671–1689. 10.1016/S0890-6955(00)00012-2
   Web of Science ®Google Scholar
• Singh, U. P., Sinha, P., and Kumar, M. (2021), “Analysis of Hydrostatic Rough Thrust Bearing Lubricated with Rabinowitsch Fluid Considering Fluid Inertia in Supply Region,” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 235(2), pp. 386–395. 10.1177/1350650120945887
   Web of Science ®Google Scholar
• Singh, U. P., Gupta, R. S., and Kapur, V. K. (2013), “On the Application of Rabinowitsch Fluid Model on an Annular Ring Hydrostatic Thrust Bearing,” Tribology International, 58, pp. 65–70. 10.1016/j.triboint.2012.09.014
   Web of Science ®Google Scholar
• Kumar, V., and Sharma, S. C. (2017), “Combined Influence of Couple Stress Lubricant, Recess Geometry and Method of Compensation on the Performance of Hydrostatic Circular Thrust Pad Bearing,” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 231(6), pp. 716–733. 10.1177/1350650116676739
   Web of Science ®Google Scholar
• Singh, U. P. (2020), “Mathematical Analysis of Effects of Surface Roughness on Steady Performance of Hydrostatic Thrust Bearings Lubricated with Rabinowitsch Type Fluids,” Journal of Applied Fluid Mechanics, 13(4), pp. 1339–1347.
   Web of Science ®Google Scholar
• Naduvinamani, N. B. and Siddangouda, A. (2007), “A Note on Porous Rayleigh Step Bearings Lubricated with Couple-Stress Fluids,” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 221(J5), pp. 615–621. 10.1243/13506501JET206
   Web of Science ®Google Scholar
• Shyu, S. H. and Hsu, W. C. (2018), “A Numerical Study on the Negligibility of Cross-Film Pressure Variation in Infinitely Wide Plane Slider Bearing, Rayleigh Step Bearing and Micro-Grooved Parallel Slider Bearing,” International Journal of Mechanical Sciences, 137, pp. 315–323. 10.1016/j.ijmecsci.2018.01.031
   Web of Science ®Google Scholar
• Rahul, K., Sikandar, A. M., Kumar, G. S., and Khan, H. (2019), “Thermo-Elastohydrodynamic Lubrication Simulation of the Rayleigh Step Bearing Using the Progressive Mesh Densification Method,” SIMULATION: Transactions of The Society for Modeling and Simulation International, 95(5), pp. 395–410. 10.1177/0037549718788727
   Web of Science ®Google Scholar
• Kumar, R., Gopaliya, M. K., Khan, H., Azam, M. S., and Biswal, D. K. (2023), “Analysis of Thrust Pad Bearing Under Mixed-EHL Regime Considering Combined Effect of Deterministic and Stochastic Surface Roughness,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45(11), pp. 1–25. 10.1007/s40430-023-04464-8
   Web of Science ®Google Scholar
• Kumar, R., and Azam, M. S. (2020), “Effect of Directionally Oriented Random Roughness on Performance of a Rayleigh Step Bearing Operating Under Mixed-Elastohydrodynamic Lubrication,” Tribology International, 153, pp. 1–16. 10.1016/j.triboint.2020.106572
   Web of Science ®Google Scholar
• Kumar, R., Azam, M. S., and Ghosh, S. K. (2019), “Influence of Stochastic Roughness on Performance of a Rayleigh Step Bearing Operating Under Thermo-Elastohydrodynamic Lubrication Considering Shear Flow Factor,” Tribology International, 134, pp. 264–280. 10.1016/j.triboint.2019.01.025
   Web of Science ®Google Scholar
• Yu, X. D., Wang, Y., Zhou, D. F., Wu, G. P., Zhou, W. K., and Bi, H. W. (2019), “Heat Transfer Characteristics of High Speed and Heavy Load Hydrostatic Bearing,” IEEE Access, 7, pp. 110770–110780. 10.1109/ACCESS.2019.2933471
   Web of Science ®Google Scholar
• Yu, X. D., Wang, F. K., Zhou, D. F., Huang, D. B., Zhan, S. W., Yu, M. B., Jiao, J. H., and Wang, J. F. (2020), “Deformation Characteristics of Adaptive Hydrostatic Thrust Bearing Under Extreme Working Conditions,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42(9), pp. 1–11. 10.1007/s40430-020-02571-4
   Web of Science ®Google Scholar
• Yu, X. D., Tang, B. Y., Wang, S. B., Han, Z. L., Li, S. H., Chen, M. M., Zhang, R. M., Wang, J. F., Jiao, J. H., and Jiang, H. (2022), “High-Speed and Heavy-Load Tribological Properties of Hydrostatic Thrust Bearing with Double Rectangular recess,” International Journal of Hydrogen Energy, 47(49), pp. 21273–21286. 10.1016/j.ijhydene.2022.04.236
   Web of Science ®Google Scholar
• Yu, X. D., Feng, Y. N., Gao, W. C., Shi, G. Q., Li, S. H., Chen, M. M., Zhang, R. M., Wang, J. F., Jia, W. T., and Jiao, J. H. (2022), “Study on Lubrication Performance of Hydrostatic Clearance Oil Film Considering Multi-Factor Coupling,” International Journal of Hydrogen Energy, 47(94), pp. 40083–40098. 10.1016/j.ijhydene.2022.09.151
   Web of Science ®Google Scholar
• Guo, L. L. (2019), Analysis of Hot Oil Carrying Characteristics about Hydrostatic Bearing Oil Film of Heavy Vertical Lathe, Harbin University of Science and Technology.
   Google Scholar
• Cheng, K., and Rowe, W. B. (1995), “A Selection Strategy for the Design of Externally Pressurized Journal Bearings,” Tribology International, 28(7), pp. 465–474. 10.1016/0301-679X(95)00011-R
   Web of Science ®Google Scholar