References
- Nedin R, Dudarev V, Vatulyan A. Some aspects of modeling and identification of inhomogeneous residual stress. Eng Struct. 2017;151:391–405.
- Korsunsky AM. A teaching essay on residual stresses and eigenstrains. Oxford, United Kingdom: Butterworth-Heinemann; 2017.
- Shen F, Zhu W, Zhou K, et al. Modeling the temperature, crystallization, and residual stress for selective laser sintering of polymeric powder. Acta Mechanica. 2021;232:3635–3653.
- Kroon M, Lindström P, Rubin MB. An Eulerian thermomechanical elastic–viscoplastic model with isotropic and directional hardening applied to computational welding mechanics. Acta Mechanica. 2021;232(1):189–218.
- Petukhov D, Keller I. Exact reconstruction formulas for plastic strain distribution in the surface-treated plate and their applications. Acta Mechanica. 2020;231(5):1849–1866.
- James MN. Residual stress influences on structural reliability. Eng Fail Anal. 2011;18(8):1909–1920.
- Withers PJ. Residual stress and its role in failure. Rep Prog Phys. 2007;70(12):2211–2264.
- Guo J, Fu HY, Pan B, et al. Recent progress of residual stress measurement methods: a review. Chin J Aeronaut. 2021;34(2):54–78.
- Smit TC, Reid RG. Residual stress measurement in composite laminates using incremental hole-drilling with power series. Exp Mech. 2018;58(8):1221–1235.
- Bendek E, Lira I, Francois M, et al. Uncertainty of residual stresses measurement by layer removal. Int J Mech Sci. 2006;48(12):1429–1438.
- Qu Z, Wei K, He Q, et al. High temperature fracture toughness and residual stress in thermal barrier coatings evaluated by an in-situ indentation method. Ceram Int. 2018;44(7):7926–7929.
- Morin L, Braham C, Tajdary P, et al. Reconstruction of heterogeneous surface residual-stresses in metallic materials from X-ray diffraction measurements. Mech Mater. 2021;158:103882.
- Zhan Y, Liu C, Kong X, et al. Experiment and numerical simulation for laser ultrasonic measurement of residual stress. Ultrasonics. 2017;73:271–276.
- Shen C, Reid M, Liss K, et al. Neutron diffraction residual stress determinations in Fe3Al based iron aluminide components fabricated using wire-arc additive manufacturing (WAAM). Additive Manuf. 2019;29(29):100774.
- Xia H, Wu JB, Xu ZY, et al. Surface residual stress detection method for aero-engine blades based on active thermal deformation excitation. Case Stud NondestrTest Eval. 2022:1–12. DOI:10.1080/10589759.2022.2159028
- Uzun F, Korsunsky AM. On the identification of eigenstrain sources of welding residual stress in bead-on-plate inconel 740H specimens. Int J Mech Sci. 2018;145:231–245.
- Mura T. Micromechanics of defects in solids. Dortrecht, The Netherlands: Kulwer Academic Publishers; 2013.
- Jun TS, Korsunsky AM. Evaluation of residual stresses and strains using the eigenstrain reconstruction method. Int J Solids Struct. 2010;47(13):1678–1686.
- Hill MR Determination of residual stress based on the estimation of eigenstrain. Doctoral dissertation. Stanford University, 1996.
- Cao YP, Hu N, Lu J, et al. An inverse approach for constructing the residual stress field induced by welding. J Strain Anal Eng Des. 2002;37(4):345–359.
- Qian XQ, Yao ZH, Cao YP, et al. An inverse approach for constructing residual stress using BEM. Eng Anal Bound Elem. 2004;28(3):205–211.
- Qian XQ, Yao ZH, Cao YP, et al. An inverse approach to construct residual stresses existing in axisymmetric structures using BEM. Eng Anal Bound Elem. 2005;29(11):986–999.
- Korsunsky AM. On the modelling of residual stresses due to surface peening using eigenstrain distributions. J Strain Anal Eng Des. 2005;40(8):817–824.
- Korsunsky AM. Eigenstrain analysis of residual strains and stresses. J Strain Anal Eng Des. 2009;44(1):29–43.
- Salvati E, Korsunsky AM. A simplified FEM eigenstrain residual stress reconstruction for surface treatments in arbitrary 3D geometries. Int J Mech Sci. 2018;138-139:457–466.
- Salvati E, Lunt AJG, Ying S, et al. Eigenstrain reconstruction of residual strains in an additively manufactured and shot peened nickel superalloy compressor blade. Comput Methods Appl Mech Eng. 2017;320:335–351.
- Uzun F, Everaerts J, Brandt LR, et al. The inclusion of short-transverse displacements in the eigenstrain reconstruction of residual stress and distortion in in740h weldments. J Manuf Processes. 2018;36:601–612.
- Uzun F, Papadaki C, Wang Z, et al. Neutron strain scanning for experimental validation of the artificial intelligence based eigenstrain contour method. Mech Mater. 2020;143:103316.
- Wu J, Qiang B, Liu X, et al. Determination of the three-dimensional welding residual stress in a thick plate T-welded joint using the stepwise eigenstrain-contour method. J Manuf Processes. 2022;84:121–133.
- Li TC, Zhang LL, Chen G, et al. Eigenstrain reconstruction of residual stress and its application in extreme high-speed laser material deposition. J Manuf Processes. 2023;85:1054–1065.
- Farrahi GH, Faghidian SA, Smith DJ. An inverse approach to determination of residual stresses induced by shot peening in round bars. Int J Mech Sci. 2009;51(9–10):726–731.
- Faghidian SA. A smoothed inverse eigenstrain method for reconstruction of the regularized residual fields. Int J Solids Struct. 2014;51(25–26):4427–4434.
- Wang FY, Mao KM, Wu SG, et al. Bivariate Fourier-series-based prediction of surface residual stress fields using stresses of partial points. Math Mechanic Of Solids. 2019;24(4):979–995.
- Wang FY, Mao KM, Li B. Prediction of residual stress fields from surface stress measurements. Int J Mech Sci. 2018;140:68–82.
- Naskar S, Banerjee B. A mixed finite element based inverse approach for residual stress reconstruction. Int J Mech Sci. 2021;196:106295.
- Salvati E, Sui T, Lunt AJG, et al. The effect of eigenstrain induced by ion beam damage on the apparent strain relief in FIB-DIC residual stress evaluation. Material Design. 2016;92:649–658.
- Lee MJ, Hill MR. Intralaboratory repeatability of residual stress determined by the slitting method. Exp Mech. 2007;47(6):745–752.
- Schajer GS. Hole-drilling residual stress measurements at 75: origins, Advances, Opportunities. Exp Mech. 2010;50(2):245–253.
- Macanhan VBDP, Correa EO, Lima AMGD, et al. Vibration response analysis on stainless steel thin plate weldments. Int J Adv Manuf Technol. 2019;102(5–8):1779–1786.
- Zarei A, Khosravifard A. Meshfree investigation of the vibrational behavior of pre-stressed laminated composite plates based on a variationally consistent plate model. Eng Anal Bound Elem. 2020;111:118–133.
- Nedin R, Vatulyan A. Inverse problem of non-homogeneous residual stress identification in thin plates. Int J Solids Struct. 2013;50(13):2107–2114.
- Destrade M, Fu YB, Nobili A. Edge wrinkling in elastically supported pre-stressed incompressible isotropic plates. Proceedings of the Royal Society A; 2016;472:20160410. doi:10.1098/rspa.2016.0410.
- Mukhopadhyay M, Mukherjee A. Finite element buckling analysis of stiffened plates. Comp Structures. 1990;34(6):795–803.
- Reynders E, Houbrechts J, De Roeck G. Fully automated (operational) modal analysis. Mech Syst Signal Process. 2012;29:228–250.
- Lu ZR, Wang L. An enhanced response sensitivity approach for structural damage identification: convergence and performance. Int J Numer Method Biomed Eng. 2017;111(13):1231–1251.
- Lu ZR, Zhou J, Wang L. On choice and effect of weight matrix for response sensitivity-based damage identification with measurement and model errors. Mech Syst Signal Process. 2019;114:1–24.
- Guo J, Wang L, Takewaki I. Experimental investigation on use of regularization techniques and pre-post measurement changes for structural damage identification. Int J Solids Struct. 2020;185-186:212–221.
- Mottershead JE, Link M, Friswell MI. The sensitivity method in finite element model updating: a tutorial. Mechanical systems and signal processing. Mech Syst Signal Process. 2011;25(7):2275–2296.
- Chen HP, Maung TS. Regularised finite element model updating using measured incomplete modal data. J Sound Vibr. 2014;333(21):5566–5582.
- Benning M, Burger M. Modern regularization methods for inverse problems. Acta numerica. 2018;27:1–111.
- Huang C, Wang L, Fu MH, et al. A novel iterative integration regularization method for ill-posed inverse problems. Eng Comput. 2021;37(3):1921–1941.
- Hansen PC, O’Leary DP. The use of the L-curve in the regularization of discrete ill-posed problems. SIAM J Sci Comput. 1993;14(6):1487–1503.