Influence of Evotherm on the thermal equilibrium time of unmodified and modified bituminous binders

References

• Abdullah, M.E., M.R. Hainin, N.I.M. Yusoff, K.A. Zamhari, and N. Hassan. 2016. “Laboratory Evaluation on the Characteristics and Pollutant Emissions of Nanoclay and Chemical Warm Mix Asphalt Modified Binders.” Construction and Building Materials 113: 488–497. doi:10.1016/j.conbuildmat.2016.03.068.
   Web of Science ®Google Scholar
• Afework, B., J. Hanania, K. Stenhouse, and J. Donev. “Thermal Conductivity.” https://energyeducation.ca/encyclopedia/Thermal_conductivity. Accessed 15 December 2021.
   Google Scholar
• Airey, G.D. 2004. “Fundamental Binder and Practical Mixture Evaluation of Polymer Modified Bituminous Materials.” International Journal of Pavement Engineering 5: 137–151. doi:10.1080/10298430412331314146.
   Google Scholar
• Arega, Z., A. Bhasin, A. Motamed, and F. Turner. 2011. “Influence of Warm-Mix Additives and Reduced Aging on the Rheology of Asphalt Binders with Different Natural Wax Contents.” Journal of Materials in Civil Engineering 23: 1453–1459. doi:10.1061/(ASCE)MT.1943-5533.0000315.
   Web of Science ®Google Scholar
• ASTM D2872. 2012. Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test). West Conshohocken, PA, USA: ASTM International.
   Google Scholar
• ASTM D7175. 2015. Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer. West Conshohocken, PA, USA: ASTM International.
   Google Scholar
• Büchner, J., M.P. Wistuba, T. Remmler, and D. Wang. 2019. “On Low Temperature Binder Testing Using DSR 4 Mm Geometry.” Materials and Structures 52. doi:10.1617/s11527-019-1412-3.
   Web of Science ®Google Scholar
• Capitão, S.D., L.G. Picado-Santos, and F. Martinho. 2012. “Pavement Engineering Materials: Review on the Use of warm-mix Asphalt.” Construction and Building Materials 36: 1016–1024. doi:10.1016/j.conbuildmat.2012.06.038.
   Web of Science ®Google Scholar
• Chen, J.-S., and C.-H. Lin. 2000. “Construction of Test Road to Evaluate Engineering Properties of Polymer-Modified Asphalt Binders.” International Journal of Pavement Engineering 1: 285–295. doi:10.1080/10298430008901711.
   Google Scholar
• Corrigan, M. “Warm Mix Asphalt FAQ’s, Federal Highway Administration.” Washington, D.C. https://www.fhwa.dot.gov/innovation/everydaycounts/edc-1/wma-faqs.cfm#hot. Accessed 15 December 2021.
   Google Scholar
• D’Angelo, J.A. 2009. “The Relationship of the Mscr Test to Rutting.” Road Materials and Pavement Design 10: 61–80. doi:10.1080/14680629.2009.9690236.
   Web of Science ®Google Scholar
• Ferrotti, G., D. Ragni, X. Lu, and F. Canestrari. 2017. “Effect of Warm Mix Asphalt Chemical Additives on the Mechanical Performance of Asphalt Binders.” Materials and Structures 50. doi:10.1617/s11527-017-1096-5.
   Web of Science ®Google Scholar
• Hassan, M. 2010. “Evaluation of the Environmental and Economic Impacts of warm-mix Asphalt Using life-cycle Assessment.” International Journal of Construction Education and Research 6: 238–250. doi:10.1080/15578771.2010.507619.
   Google Scholar
• IRC-SP 53. 2010. Guidelines on Use of Modified Bitumen in Road Construction. New Delhi, India: Indian Roads Congress. Second Revision.
   Google Scholar
• IS 73. 2018. Indian Standard PAVING BITUMEN — SPECIFICATION (Fourth Revision, Reaffirmed). New Delhi, India: Bureau of Indian Standards.
   Google Scholar
• IS-15462. 2019. Polymer Modified Bitumen (PMB)-Specification. New Delhi, India: Bureau of Indian Standards.
   Google Scholar
• IS-17079. 2019. Rubber Modified Bitumen (Rmb)-specification. New Delhi, India: Bureau of Indian Standards.
   Google Scholar
• Kar, S.S., A.K. Swamy, D. Tiwari, and P.K. Jain. 2020. “Impact of Chemical Composition on Foaming Characteristics of Asphalt Binder.” Journal of Transportation Engineering, Part B: Pavements 146: 04020045. doi:10.1061/jpeodx.0000196.
   Web of Science ®Google Scholar
• Kataware, A.V., and D. Singh. 2018. “Effects of Wax-Based, Chemical-Based, and Water-Based Warm-Mix Additives on Mechanical Performance of Asphalt Binders.” Journal of Materials in Civil Engineering 30: 04018237. doi:10.1061/(asce)mt.1943-5533.0002441.
   Web of Science ®Google Scholar
• Kumar, T.A., I. J. S. Sandeep, M.R. Nivitha, V. Chowdary, and J.M. Krishnan. 2019. “Quantification of Aging Compounds in Evotherm-Modified Warm-Mix Asphalt Binder Using Fourier Transform Infrared Spectroscopy.” Arabian Journal for Science and Engineering 44: 8429–8437. doi:10.1007/s13369-019-03965-w.
   Web of Science ®Google Scholar
• Mazumder, M., V. Sriraman, H.H. Kim, and S.J. Lee. 2016. “Quantifying the Environmental Burdens of the Hot Mix Asphalt (HMA) Pavements and the Production of Warm Mix Asphalt (WMA).” International Journal of Pavement Research and Technology 9: 190–201. doi:10.1016/j.ijprt.2016.06.001.
   Google Scholar
• Mubashirhussain, S., and V. Chowdary. 2019. “Influence of Short-Term Ageing and Long-Term Ageing on the Thermal Equilibrium Time for Two Different Viscosity Grades of Bitumen Used for Road Construction.” International Journal of Transportation Engineering 9: 198–209. doi:10.7708/ijtte.2019.9(2).06.
   Google Scholar
• Petersen, J.C., and R. Glaser. 2011. “Asphalt Oxidation Mechanisms and the Role of Oxidation Products on Age Hardening Revisited.” Road Materials and Pavement Design 12: 795–819. doi:10.1080/14680629.2011.9713895.
   Web of Science ®Google Scholar
• Roja, K.L., N. Roy, and J.M. Krishnan. 2016. “Influence of Aging on the Rheological Behavior of Warm Mix Asphalt Binders.” In: 8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials, RILEM Bookseries 11, October 7-9, 2015, Ancona, Italy. pp. 497–508. doi:10.1007/978-94-017-7342-3_40.
   Google Scholar
• Rubio, M.C., G. Martínez, L. Baena, and F. Moreno. 2012. “Warm Mix Asphalt: An Overview.” Journal of Cleaner Production 24: 76–84. doi:10.1016/j.jclepro.2011.11.053.
   Web of Science ®Google Scholar
• Sirin, O., D.K. Paul, and E. Kassem. 2018. “State of the Art Study on Aging of Asphalt Mixtures and Use of Antioxidant Additives.” Advances in Civil Engineering 2018. doi:10.1155/2018/3428961.
   Web of Science ®Google Scholar
• Specialchem. EvothermTM J1 - Technical Data Sheet. Universal Selector, Specialchem. https://coatings.specialchem.com/product/a-ingevity-evotherm-j1 (2021). Accessed 16 December 2021
   Google Scholar
• Tauste, R., F. Moreno-Navarro, M. Sol-Sánchez, and M.C. Rubio-Gámez. 2018. “Understanding the Bitumen Ageing Phenomenon: A Review.” Construction and Building Materials 192: 593–609. doi:10.1016/j.conbuildmat.2018.10.169.
   Web of Science ®Google Scholar
• Vaitkus, A., D. Čygas, A. Laurinavičius, V. Vorobjovas, and Z. Perveneckas. 2016. “Influence of Warm Mix Asphalt Technology on Asphalt Physical and Mechanical Properties.” Construction and Building Materials 112: 800–806. doi:10.1016/j.conbuildmat.2016.02.212.
   Web of Science ®Google Scholar
• Xiao, F., V.S. Punith, and S.N. Amirkhanian. 2012. “Effects of non-foaming WMA Additives on Asphalt Binders at High Performance Temperatures.” Fuel 94: 144–155. doi:10.1016/j.fuel.2011.09.017.
   Web of Science ®Google Scholar
• Yu, H., Z. Leng, Z. Zhou, K. Shih, F. Xiao, and Z. Gao. 2017. “Optimization of Preparation Procedure of Liquid Warm Mix Additive Modified Asphalt Rubber.” Journal of Cleaner Production 141: 336–345. doi:10.1016/j.jclepro.2016.09.043.
   Web of Science ®Google Scholar