References
- Vogiatzis CA, Kountouras DT, Skolianos MS. Corrosion behaviour of 304 stainless steel in simulated oilfield produced water. Corros Eng, Sci Technol 2016;51(1):51–59. doi:10.1179/1743278215Y.0000000033
- Riffard F, Buscail H, Rabaste F, et al. Surface modifications of oxide layer formed in isothermal high temperature conditions of AISI 304 stainless steel. Corros Eng, Sci Technol 2011;46(4):562–567. doi:10.1179/147842209X12579401586843
- Panhalkar N, Paul R, Anand S. Optimization of automobile assembly process to reduce assembly time. Corros Eng, Sci Technol 2015;51 (6):416–428.
- Elshawesh F, Houd AE, Raghai OE. Corrosion and cracking under insulation of type 304 stainless steel at ambient temperature. Corros Eng, Sci Technol 2003;38(3):239–240. doi:10.1179/147842203770226997
- Karimi A, Maamouri MLJ. Martin: cavitation-erosion-induced microstructures in copper single crystals. Mater Sci Eng, A. 1989;113:287–296. doi:10.1016/0921-5093(89)90317-1
- Selvam K, Saini J, Perumal G, et al. Exceptional cavitation erosion-corrosion behavior of dual-phase bimodal structure in austenitic stainless steel. Tribol Int 2019;134:77–86. doi:10.1016/j.triboint.2019.01.018
- Zhang H, Chen X, Gong Y, et al. In-situ SEM observations of ultrasonic cavitation erosion behavior of HVOF-sprayed coatings. Ultrason Sonochem. 2019;60:104760, doi:10.1016/j.ultsonch.2019.104760
- Nair RB, Arora HS, Grewal HS. Microwave synthesized complex concentrated alloy coatings: plausible solution to cavitation induced erosion-corrosion. Ultrason Sonochem. 2019;50:114–125. doi:10.1016/j.ultsonch.2018.09.004
- Qiao L, Wu Y, Hong S, et al. Relationships between spray parameters, microstructures and ultrasonic cavitation erosion behavior of HVOF sprayed Fe-based amorphous/nanocrystalline coatings. Ultrason Sonochem. 2017;39:39–46. doi:10.1016/j.ultsonch.2017.04.011
- Lavigne S, Pougoum F, Savoie S, et al. Cavitation erosion behavior of HVOF CaviTec coatings. Wear. 2017;386-387:90–98.
- Wei Z, Wu YP, Hong S, et al. Ultrasonic cavitation erosion behaviors of high-velocity oxygen-fuel (HVOF) sprayed AlCoCrFeNi high-entropy alloy coating in different solutions. Surf Coat Technol. 2021;409:126899. doi:10.1016/j.surfcoat.2021.126899
- Xu J, Peng S, Li ZY, et al. Remarkable cavitation erosion-corrosion resistance of CoCrFeNiTiMo high-entropy alloy coatings. Corros Sci 2021;190:109663. doi:10.1016/j.corsci.2021.109663
- Nair RB, Arora HS, Mukherjee S, et al. Exceptionally high cavitation erosion and corrosion resistance of a high entropy alloy. Ultrason Sonochem 2017;S1350-4177(17):30450–9.
- Kwok CT, Man HC, Cheng FT, et al. Developments in laser-based surface engineering processes: with particular reference to protection against cavitation erosion. Surf Coat Technol 2016;S0257-8972(16):30081–0.
- Zhang S, Wu CL, Zhang CH, et al. Laser surface alloying of FeCoCrAlNi high-entropy alloy on 304 stainless steel to enhance corrosion and cavitation erosion resistance. Opt Laser Technol. 2016;84:23–31. doi:10.1016/j.optlastec.2016.04.011
- Nair RB, Arora HS, Grewal HS. Microwave synthesized complex concentrated alloy coatings: plausible solution to cavitation induced erosion-corrosion. Ultrason. Sonochem. 2018;S1350-4177(18):30515–7.
- G32-10 A. Standard test method for cavitation erosion using vibratory apparatus. ASTM Int. 2010.
- Zheng ZB, Zheng YG, Sun WH, et al. Effect of heat treatment on the structure, cavitation erosion and erosion-corrosion behavior of Fe-based amorphous coatings. Tribol Int 2015;90:393–403.
- Cao LF, Qin ZB, Deng YD, et al. Effect of passive film on cavitation corrosion behavior of 316L stainless steel. Int J Electrochem Sci. 2020;15:628–638. doi:10.20964/2020.01.51
- Wu CL, Zhang S, Zhang CH, et al. Phase evolution and cavitation erosion-corrosion behavior of FeCoCrAlNiTi x high entropy alloy coatings on 304 stainless steel by laser surface alloying. J Alloys Compd. 2017;698:761–770. doi:10.1016/j.jallcom.2016.12.196
- Hu JX, Zhang LM, Ma AL, et al. Effect of cavitation intensity on the cavitation erosion behavior of 316L stainless steel in 3.5 wt.% NaCl solution. Metals (Basel). 2022;12(2):198, doi:10.3390/met12020198
- Zhao T, Zhang S, Wang ZY, et al. Wu: cavitation erosion/corrosion synergy and wear behaviors of nickel-based alloy coatings on 304 stainless steel prepared by cold metal transfer. Wear. 2022;510–511:204510, doi:10.1016/j.wear.2022.204510
- Wu CL, Xu TZ, Wang ZY, et al. Laser surface alloying of FeCoCrAlNiTi high entropy alloy composite coatings reinforced with TiC on 304 stainless steel to enhance wear behavior. Ceramics International 2022;48:20690–20698, doi:10.1016/j.ceramint.2022.04.049