Physical and Mechanical Behavior of Ramie and Glass Fiber Reinforced Epoxy Resin-Based Hybrid Composites

References

• Aslan, M., M. Tufan, and T. Küçükömeroğlu. 2018. Tribological and mechanical performance of sisal-filled waste carbon and glass fibre hybrid composites. Composites Part B: Engineering 140 (May):241–13. doi: 10.1016/j.compositesb.2017.12.039.
   Google Scholar
• Azlin, M. N. M., S. M. Sapuan, M. Y. M. Zuhri, and E. S. Zainudin. 2022. Effect of stacking sequence and fiber content on mechanical and morphological properties of woven kenaf/polyester fiber reinforced Polylactic Acid (PLA) hybrid laminated composites. Journal of Materials Research and Technology 16 (January):1190–201. doi: 10.1016/j.jmrt.2021.12.046.
   Google Scholar
• Barouni, A., C. Lupton, C. Jiang, A. Saifullah, K. Giasin, Z. Zhang, and H. N. Dhakal. 2022. Investigation into the fatigue properties of flax fibre epoxy composites and hybrid composites based on flax and glass fibres. Composite Structures 281 (February):115046. doi: 10.1016/j.compstruct.2021.115046.
   Google Scholar
• Bharath, K. N., J. S. Binoj, B. B. Mansingh, G. B. Manjunath, G. V. Raghu, S. Siengchin, and M. R. Sanjay. 2023. Effect of stacking sequence and interfacial analysis of biomass sheep wool/glass fiber reinforced epoxy biocomposites. Biomass Conversion and Biorefinery (February 23):1–10. doi: 10.1007/s13399-023-03918-2.
   Google Scholar
• Billady, R. K., and S. Mudradi. 2020. Influence of filler incorporation on the mechanical and wear behaviour of synthetic fiber reinforced polymer matrix composites - a review. In AIP Conference Proceedings 2236 (1):040001.
   Google Scholar
• Bonniau, P., and A. R. Bunsell. 1981. A comparative study of water absorption theories applied to glass epoxy composites. Journal of Composite Materials 15 (3):272–93. doi: 10.1177/002199838101500306.
   Google Scholar
• Deo, C., and S. K. Acharya. 2010. Effect of moisture absorption on mechanical properties of chopped natural fiber reinforced epoxy composite. Journal of Reinforced Plastics and Composites 29 (16):2513–21. doi: 10.1177/0731684409353352.
   Web of Science ®Google Scholar
• Djafar, Z., I. Renreng, and M. Jannah. 2020. Tensile and bending strength analysis of ramie fiber and woven ramie reinforced epoxy composite. Journal of Natural Fibers 18 (12):2315–26. doi: 10.1080/15440478.2020.1726242.
   Web of Science ®Google Scholar
• Giridharan, R. 2019. Preparation and property evaluation of glass/ramie fibers reinforced epoxy hybrid composites. Composites Part B: Engineering 167 (June):342–45. doi: 10.1016/j.compositesb.2018.12.049.
   Google Scholar
• Hassan, S. A., J. S. Binoj, K. L. Goh, B. B. Mansingh, K. C. Varaprasad, M. Y. Yahya, F. E. Che Othman, U. Ahmed, D. Nurhadiyanto, A. P. Wulandari, et al. 2022. Effect of fiber stacking sequence and orientation on quasi- static indentation properties of sustainable hybrid carbon/ramie fiber epoxy composites. Current Research in Green and Sustainable Chemistry 5:100284. doi: 10.1016/j.crgsc.2022.100284.
   Google Scholar
• Kangokar Mukesh, S., N. Bettagowda, J. Praveenkumara, Y. G. Thyavihalli Girijappa, M. Puttegowda, S. Mavinkere Rangappa, S. Siengchin, and S. Gorbatyuk. June 2022. Influence of stacking sequence on flax/kevlar hybrid epoxy composites: mechanical and morphological studies. Polymer Composites 43(6):3782–93. doi: 10.1002/pc.26655.
   Web of Science ®Google Scholar
• Keerthi Gowda, B. S., K. Naresh, S. Ilangovan, M. R. Sanjay, and S. Siengchin. 2022. Effect of fiber volume fraction on mechanical and fire resistance properties of basalt/polyester and pineapple/polyester composites. Journal of Natural Fibers 19 (13):6074–88. doi: 10.1080/15440478.2021.1904479.
   Web of Science ®Google Scholar
• Khalid, M. Y., A. Al Rashid, Z. U. Arif, W. Ahmed, H. Arshad, and A. A. Zaidi. 2021. Natural fiber reinforced composites: Sustainable materials for emerging applications. Results in Engineering 11 (September):100263. doi:10.1016/j.rineng.2021.100263.
   Google Scholar
• Kumar, R., and A. Anand. October 2018. Dry sliding friction and wear behavior of ramie fiber reinforced epoxy composites. Materials Research Express 6(1):015309. doi: 10.1088/2053-1591/aae69b.
   Web of Science ®Google Scholar
• Negi, R. S., L. Prasad, A. Yadav, and J. Winczek. 2022. Physical and mechanical properties of pinecone scale fiber/Vigna mungo powder reinforced polypropylene based hybrid composites. Journal of Natural Fibers 19 (15):11458–68. doi: 10.1080/15440478.2022.2025983.
   Web of Science ®Google Scholar
• Portella, E. H., D. Romanzini, C. C. Angrizani, S. C. Amico, and A. J. Zattera. April 2016. Influence of stacking sequence on the mechanical and dynamic mechanical properties of cotton/glass fiber reinforced polyester composites. Materials Research 19(3):542–47. doi: 10.1590/1980-5373-MR-2016-0058.
   Web of Science ®Google Scholar
• Prasad, L., R. Bairwan, A. Yadav, A. Kumar, V. Kumar, and J. Winczek. 2022. Evaluation of physical, mechanical, and wear properties of jatropha shell powder reinforced epoxy glass fiber composites. Journal of Natural Fibers 19 (15):12195–207. doi: 10.1080/15440478.2022.2054892.
   Web of Science ®Google Scholar
• Prasad, L., A. Kumain, R. V. Patel, A. Yadav, and J. Winczek. 2020. Physical and mechanical behavior of hemp and nettle fiber-reinforced polyester resin-based hybrid composites. Journal of Natural Fibers 19 (7):2632–47. doi: 10.1080/15440478.2020.1821284.
   Web of Science ®Google Scholar
• Prasad, L., S. Kumar, R. V. Patel, A. Yadav, V. Kumar, and J. Winczek. November 2020. Physical and mechanical behaviour of sugarcane bagasse fibre-reinforced epoxy bio-composites. Materials 13(23):5387. doi: 10.3390/ma13235387.
   PubMed Web of Science ®Google Scholar
• Prasad, L., G. Singh, A. Yadav, V. Kumar, and A. Kumar. 2019. Properties of functionally gradient composites reinforced with waste natural fillers. Acta Periodica Technologicano 50 (50):250–59. doi: 10.2298/APT1950250P.
   Google Scholar
• Prasad, L., V. Singh, R. V. Patel, A. Yadav, V. Kumar, and J. Winczek. 2021. Physical and mechanical properties of rambans (Agave) fiber reinforced with polyester composite materials. Journal of Natural Fibers 19 (13):6104–18. doi: 10.1080/15440478.2021.1904481.
   Web of Science ®Google Scholar
• Ray, S., A. K. Rout, and A. KuSahoo. 2017. A study on tribological behavior of glass-epoxy composite filled with granite dust. IOP Conference Series: Materials Science & Engineering 225 (August):012097. doi: 10.1088/1757-899X/225/1/012097.
   Google Scholar
• Romanzini, D., H. L. Ornaghi Junior, S. C. Amico, and A. J. Zattera. May 2012. Preparation and characterization of ramie-glass fiber reinforced polymer matrix hybrid composites. Materials Research 15(3):415–20. doi: 10.1590/S1516-14392012005000050.
   Web of Science ®Google Scholar
• Rudresh, B. M., and B. N. Ravikumar. 2017. Effect of short glass fiber loading on the mechanical behaviour of PA66/PTFE blend composites. Transactions of the Indian Institute of Metals 70 (5):1285–94. doi: 10.1007/s12666-016-0925-5.
   Web of Science ®Google Scholar
• Thiyagu, C., and U. Narendrakumar. 2022. Vibrational analysis of glass/ramie fiber reinforced hybrid polymer composite. Polymer Composites 43 (3):1395–406. doi: 10.1002/pc.26460.
   Web of Science ®Google Scholar
• Thiyagu, C., and U. NarendraKumar. January 2, 2023. Effect of ammonium polyphosphate on fire‐retardant, mechanical, and vibrational analysis of epoxy/glass/ramie hybrid composite. Polymer Composites 44 (1):621–31. doi: 10.1002/pc.27123.
   Web of Science ®Google Scholar
• Thyavihalli Girijappa, Y. G., S. Mavinkere Rangappa, J. Parameswaranpillai, and S. Siengchin. 2019. Natural fibers as sustainable and renewable resource for development of eco-friendly composites: A comprehensive review. Frontiers in Materials 6 (September). doi: 10.3389/fmats.2019.00226.
   Google Scholar
• Vasudevan, A., S. Senthil Kumaran, K. Naresh, and R. Velmurugan. January 2020. Layer-wise damage prediction in Carbon/Kevlar/S-Glass/E-Glass fibre reinforced epoxy hybrid composites under low-velocity impact loading using advanced 3D computed tomography. International Journal of Crashworthiness 25(1):9–23. doi: 10.1080/13588265.2018.1511234.
   Web of Science ®Google Scholar
• Vedanarayanan, V., B. S. P. Kumar, M. S. Karuna, A. Jayanthi, K. V. P. Kumar, A. Radha, G. Ramkumar, and D. Christopher. 2022. Experimental investigation on mechanical behaviour of kevlar and ramie fibre reinforced epoxy composites. Ed Palanivel Velmurugan Journal of Nanomaterials 2022 (February):1–10. doi: 10.1155/2022/8802222.
   Google Scholar
• Wang, H., H. Memon, E. A. M. Hassan, M. S. Miah, and M. A. Ali. April 2019. Effect of jute fiber modification on mechanical properties of jute fiber composite. Materials 12(8):1226. doi: 10.3390/ma12081226.
   PubMed Web of Science ®Google Scholar
• Zainudin, Z., N. I. S. Mohd Yusoff, M. U. Wahit, and S. H. Che Man. December 2020. Mechanical, thermal, void fraction and water absorption of silane surface modified silk fiber reinforced epoxy composites. Polymer-Plastics Technology & Materials 59(18):1987–2002. doi: 10.1080/25740881.2020.1784215.
   Web of Science ®Google Scholar