1,217
Views
0
CrossRef citations to date
0
Altmetric
Review Article

A Review of Recent Progress in Fabrication Methods and Applications of Polydimethylsiloxane Sponge

, , , &

References

  • Abshirini, M., M. Cengiz Altan, Y. Liu, M. C. Saha, L. Cummings, and T. Robison. 2020. “Manufacturing of Porous Polydimethylsiloxane (PDMS) Plates Using Solvent Evaporation Induced Phase Separation Technique.” ASME International Mechanical Engineering Congress & Exposition 24062. https://doi.org/10.1115/IMECE2020-24062.
  • Abshirini, M., M. C. Saha, M. C. Altan, Y. Liu, L. Cummings, and T. Robison. 2021. “Investigation of Porous Polydimethylsiloxane Structures with Tunable Properties Induced by the Phase Separation Technique.” Journal of Applied Polymer Science 138 (29): 50688. https://doi.org/10.1002/app.50688.
  • Abshirini, M., M. C. Saha, M. Cengiz Altan, and Y. Liu. 2021. “Synthesis and Characterization of Hierarchical Porous Structure of Polydimethylsiloxane (PDMS) Sheets via Two-Step Phase Separation Method.” Materials & Design 212:110194. https://doi.org/10.1016/j.matdes.2021.110194.
  • Bekyarova, E., S. Sarkar, F. Wang, M. E. Itkis, I. Kalinina, X. Tian, and R. C. Haddon. 2013. “Effect of Covalent Chemistry on the Electronic Structure and Properties of Carbon Nanotubes and Graphene.” Accounts of Chemical Research 46 (1): 65–36.
  • Butt, M. A., N. L. Kazanskiy, and S. N. Khonina. 2022. “Revolution in Flexible Wearable Electronics for Temperature and Pressure Monitoring— a Review.” Electronics 11 (5): 716.
  • Cao, C.-F., P.-H. Wang, J.-W. Zhang, K.-Y. Guo, L. Yang, Q.-Q. Xia, G.-D. Zhang, et al. 2020. “One-Step and Green Synthesis of Lightweight, Mechanically Flexible and Flame-Retardant Polydimethylsiloxane Foam Nanocomposites via Surface-Assembling Ultralow Content of Graphene Derivative.” Chemical Engineering Journal 393:124724. https://doi.org/10.1016/j.cej.2020.124724.
  • Cao, C.-F., G.-D. Zhang, Z. Li, L.-X. Gong, J.-F. Gao, J.-X. Jiang, L.-C. Tang, and Y.-W. Mai. 2019. “Design of Mechanically Stable, Electrically Conductive and Highly Hydrophobic Three-Dimensional Graphene Nanoribbon Composites by Modulating the Interconnected Network on Polymer Foam Skeleton.” Composites Science and Technology 171:162–170. https://doi.org/10.1016/j.compscitech.2018.12.014.
  • Cui, J., B. Zhang, J. Duan, H. Guo, and J. Tang. 2016. “Flexible Pressure Sensor with Ag Wrinkled Electrodes Based on PDMS Substrate.” Sensors 16 (12): 2131.
  • Dai, S.-W., G. Ya-Li, L. Zhao, W. Zhang, C.-H. Gao, W. Yu-Xi, S.-C. Shen, C. Zhang, T.-T. Kong, and L. Yu-Tong. 2021. “Bamboo-Inspired Mechanically Flexible and Electrically Conductive Polydimethylsiloxane Foam Materials with Designed Hierarchical Pore Structures for Ultra-Sensitive and Reliable Piezoresistive Pressure Sensor.” Composites Part B Engineering 225:109243. https://doi.org/10.1016/j.compositesb.2021.109243.
  • Dan, L., S. Shi, H.-J. Chung, and A. Elias. 2019. “Porous Polydimethylsiloxane–Silver Nanowire Devices for Wearable Pressure Sensors.” Acs Applied Nano Materials 2 (8): 4869–4878.
  • Du, Y., S. Liu, S. Yuan, H. Zhang, and S. Yuan. 2021. “A Study of Influence Factors to Improve the Heat Transfer of Pure-Polydimethylsiloxane (PDMS): A Molecular Dynamics Study.” Colloids and Surfaces A, Physicochemical and Engineering Aspects 618:126409. https://doi.org/10.1016/j.colsurfa.2021.126409.
  • Faraj, M. G., K. Ibrahim, and M. K. M. Ali. 2011. “PET as a Plastic Substrate for the Flexible Optoelectronic Applications.” Optoelectronics and Advanced Materials – Rapid Communications 5 (8): 879–882.
  • Gandy, P. J. F., S. Bardhan, A. L. Mackay, and J. Klinowski. 2001. “Nodal Surface Approximations to the P,G,D and I-WP Triply Periodic Minimal Surfaces.” Chemical Physics Letters 336 (3): 187–195. https://doi.org/10.1016/S0009-2614(00)01418-4.
  • Gao, J., K. Shang, Y. Ding, and Z. Wen. 2021. “Material and Configuration Design Strategies Towards Flexible and Wearable Power Supply Devices: A Review.” Journal of Materials Chemistry A 9 (14): 8950–8965.
  • Guo, B.-F., P.-H. Wang, C.-F. Cao, Q. Zhang-Hao, L. Ling-Yu, G.-D. Zhang, L.-X. Gong, P. Song, J.-F. Gao, and Y.-W. Mai. 2022. “Restricted Assembly of Ultralow Loading of Graphene Oxide for Lightweight, Mechanically Flexible and Flame Retardant Polydimethylsiloxane Foam Composites.” Composites Part B Engineering 247:110290. https://doi.org/10.1016/j.compositesb.2022.110290.
  • Ha, H. B., B. H. Lee, N. Qaiser, Y. Seo, J. Kim, J. M. Koo, and B. Hwang. 2022. “Highly Reliable Anisotropic Interconnection System Fabricated Using Cu/sn-Soldered Microdumbbell Arrays and Polyimide Films for Application to Flexible Electronics.” Intermetallics 144:107535. https://doi.org/10.1016/j.intermet.2022.107535.
  • Ha, H., S. Müller, R.-P. Baumann, and B. Hwang n.d. Peakforce Quantitative Nanomechanical Mapping For Surface Energy Characterization On The Nanoscale: A Mini-review. Facta Universitatis, Series: Mechanical Engineering. https://doi.org/10.22190/FUME221126001H.
  • Han, T.-L., B.-F. Guo, G.-D. Zhang, and L.-C. Tang. 2023. “Facile Synthesis of Hollow Glass Microsphere Filled PDMS Foam Composites with Exceptional Lightweight, Mechanical Flexibility, and Thermal Insulating Property.” Molecules 28 (6): 2614.
  • Ha, H., N. Qaiser, J. H. Jeong, K. Lee, and B. Hwang. 2023. “Highly Stretchable CIP–PDMS Composites with Partial Interface Bonding for Electromagnetic Noise Suppression in GHz Frequency Range.” Journal of Natural Fibers 20 (1): 2128149. https://doi.org/10.1080/15440478.2022.2128149.
  • He, X., X. Mu, Q. Wen, Z. Wen, J. Yang, C. Hu, and H. Shi. 2016. “Flexible and Transparent Triboelectric Nanogenerator Based on High Performance Well-Ordered Porous PDMS Dielectric Film.” Nano Research 9:3714–3724. https://doi.org/10.1007/s12274-016-1242-3.
  • Herren, B., V. Webster, E. Davidson, M. C. Saha, M. Cengiz Altan, and Y. Liu. 2021. “PDMS Sponges with Embedded Carbon Nanotubes as Piezoresistive Sensors for Human Motion Detection.” Nanomaterials 11 (7): 1740.
  • He, Y., D. Wu, M. Zhou, Y. Zheng, T. Wang, C. Lu, L. Zhang, H. Liu, and C. Liu. 2021. “Wearable Strain Sensors Based on a Porous Polydimethylsiloxane Hybrid with Carbon Nanotubes and Graphene.” ACS Applied Materials and Interfaces 13 (13): 15572–15583.
  • Huang, L., H. Wang, D. Zhan, and F. Fang. 2021. “Flexible Capacitive Pressure Sensor Based on Laser–Induced Graphene and Polydimethylsiloxane Foam.” IEEE Sensors Journal 21 (10): 12048–12056.
  • Hu, W. J., Q. Q. Xia, H. T. Pan, H. Y. Chen, Y. X. Qu, Z. Y. Chen, G. D. Zhang, et al. 2022. “Green and Rapid Preparation of Fluorosilicone Rubber Foam Materials with Tunable Chemical Resistance for Efficient Oil– water Separation.” Polymers 14 (8): 1628.
  • Hwang, B., Y. Han, and P. Matteini. 2022. “BENDING FATIGUE BEHAVIOR of AG NANOWIRE/CU THIN-FILM HYBRID INTERCONNECTS for WEARABLE ELECTRONICS.” 2022:8. https://doi.org/10.22190/fume220730040h.
  • Jung, Y., K. Jung, B. Park, J. Choi, D. Kim, J. Park, K. Jongsoo, and H. Cho. 2019. “Wearable Piezoresistive Strain Sensor Based on Graphene-Coated Three-Dimensional Micro-Porous PDMS Sponge.” Micro and Nano Systems Letters 7 (1): 1–9.
  • Jung, Y., W. Lee, K. Jung, B. Park, J. Park, K. Jongsoo, and H. Cho. 2020. “A Highly Sensitive and Flexible Capacitive Pressure Sensor Based on a Porous Three-Dimensional PDMS/Microsphere Composite.” Polymers 12 (6): 1412.
  • Keller, A., K. Zainulabdeen, H. Warren, and M. In Het Panhuis. 2022. “Fabrication of Porous PDMS Sponges Using Spontaneously Self-Removing Sacrificial Templates.” MRS Advances 7 (23–24): 495–498.
  • Kim, Y., S. Jang, and O. Je Hoon. 2019. “Fabrication of Highly Sensitive Capacitive Pressure Sensors with Porous PDMS Dielectric Layer via Microwave Treatment.” Microelectronic Engineering 215:111002. https://doi.org/10.1016/j.mee.2019.111002.
  • Kim, S., J. Kim, D. Kim, B. Kim, H. Chae, Y. Hyunjung, and B. Hwang. 2019. “High-Performance Transparent Quantum Dot Light-Emitting Diode with Patchable Transparent Electrodes.” ACS Applied Materials and Interfaces 11 (29): 26333–26338. https://doi.org/10.1021/acsami.9b05969.
  • Kim, W.-G., D.-W. Kim, I.-W. Tcho, J.-K. Kim, M.-S. Kim, and Y.-K. Choi. 2021. “Triboelectric Nanogenerator: Structure, Mechanism, and Applications.” Agricultural Science & Technology Nano 15 (1): 258–287.
  • Kim, T. K., J. Koo Kim, and O. Chan Jeong. 2011. “Measurement of Nonlinear Mechanical Properties of PDMS Elastomer.” Microelectronic Engineering 88 (8): 1982–1985.
  • Kim, H., N. Qaiser, and B. Hwang. 2023. “ELECTRO-MECHANICAL RESPONSE of STRETCHABLE PDMS COMPOSITES with a HYBRID FILLER SYSTEM.” Facta Universitatis, Series: Mechanical Engineering 2023:11. https://doi.org/10.22190/fume221205002k.
  • Kim, H., N. Qaiser, and B. Hwang 2023. “Electro-mechanical response of stretchable pdms composites with a hybrid filler system.” Facta Universitatis, Series: Mechanical Engineering 21 (1): 51–61. https://doi.org/10.22190/FUME221205002K.
  • Lee, C., H. Kim, and B. Hwang. 2019. “Fracture Behavior of Metal Oxide/Silver Nanowire Composite Electrodes Under Cyclic Bending.” Journal of Alloys and Compounds 773:361–366. https://doi.org/10.1016/j.jallcom.2018.09.212.
  • Lee, M., B.-H. Wee, and J.-D. Hong. 2015. “High Performance Flexible Supercapacitor Electrodes Composed of Ultralarge Graphene Sheets and Vanadium Dioxide.” Advanced Energy Materials 5 (7): 1401890. https://doi.org/10.1002/aenm.201401890.
  • Lee, H., J. Yoo, J. Park, J. Ho Kim, K. Kang, and Y. Sik Jung. 2012. “A Stretchable Polymer–Carbon Nanotube Composite Electrode for Flexible Lithium‐Ion Batteries: Porosity Engineering by Controlled Phase Separation.” Advanced Energy Materials 2 (8): 976–982.
  • Li, S. N., X. F. He, Z. F. Zeng, B. Jiang, Q. Wu, L. X. Gong, Y. Li, J. Bae, S. Wang, and L. C. Tang. 2022. “Mechanically Ductile, Ionically Conductive and Low-Temperature Tolerant Hydrogel Enabled by High-Concentration Saline Towards Flexible Strain Sensor.” Nano Energy 103:107789. https://doi.org/10.1016/j.nanoen.2022.107789.
  • Li, X. P., Y. Li, X. Li, D. Song, P. Min, C. Hu, H. B. Zhang, N. Koratkar, and Z. Z. Yu. 2019. “Highly Sensitive, Reliable and Flexible Piezoresistive Pressure Sensors Featuring Polyurethane Sponge Coated with MXene Sheets.” Journal of Colloid and Interface Science 542:54–62.
  • Li, B., J. Luo, X. Huang, L. Lin, L. Wang, M. Hu, L. Tang, H. Xue, J. Gao, and Y. W. Mai. 2020. “A Highly Stretchable, Super-Hydrophobic Strain Sensor Based on Polydopamine and Graphene Reinforced Nanofiber Composite for Human Motion Monitoring.” Composites Part B Engineering 181:107580. https://doi.org/10.1016/j.compositesb.2019.107580.
  • Liu, C., Y. Duan, J. Cai, L. Xinghao, D. Zhang, J. Gao, and Y. Che. 2019. “Compressible Fe3O4/MWCNTs-Coated Polymer Foams for High-Performance and Tunable Electromagnetic Microwave Absorption.” Materials Research Express 6 (10): 106114. https://doi.org/10.1088/2053-1591/ab3a05.
  • Li, S. N., Z. R. Yu, B. F. Guo, K. Y. Guo, Y. Li, L. X. Gong, L. Zhao, J. Bae, and L. C. Tang. 2021. “Environmentally Stable, Mechanically Flexible, Self-Adhesive, and Electrically Conductive Ti3C2TX MXene Hydrogels for Wide-Temperature Strain Sensing.” Nano Energy 90:106502. https://doi.org/10.1016/j.nanoen.2021.106502.
  • Long, Y., X. Zhao, X. Jiang, L. Zhang, H. Zhang, Y. Liu, and H. Zhu. 2018. “A Porous Graphene/Polydimethylsiloxane Composite by Chemical Foaming for Simultaneous Tensile and Compressive Strain Sensing.” FlatChem 10:1–7. https://doi.org/10.1016/j.flatc.2018.07.001.
  • Lu, S. Y., M. Jin, Y. Zhang, Y. B. Niu, J. C. Gao, and C. Li. 2018. “Chemically Exfoliating Biomass into a Graphene‐Like Porous Active Carbon with Rational Pore Structure, Good Conductivity, and Large Surface Area for High‐Performance Supercapacitors.” Advanced Energy Materials 8 (11): 1702545 doi:https://doi.org/10.1002/aenm.201702545.
  • Lu, Y., Y. Mi, T. Wu, X. Cao, and N. Wang. 2022. “From Triboelectric Nanogenerator to Polymer-Based Biosensor: A Review.” Biosensors 12 (5): 323.
  • Luo, W., M. Charara, M. C. Saha, and Y. Liu. 2019. “Fabrication and Characterization of Porous CNF/PDMS Nanocomposites for Sensing Applications.” Applied Nanoscience 9:1309–1317. https://doi.org/10.1007/s13204-019-00958-x.
  • Lv, L. Y., C. F. Cao, Y. X. Qu, G. D. Zhang, L. Zhao, K. Cao, P. Song, and L. C. Tang. 2022. “Smart Fire-Warning Materials and Sensors: Design Principle, Performances, and Applications.” Materials Science and Engineering: R: Reports 150:100690. https://doi.org/10.1016/j.mser.2022.100690.
  • Montazerian, H., M. G. A. Mohamed, M. Mohaghegh Montazeri, S. Kheiri, A. S. Milani, K. Kim, and M. Hoorfar. 2019. “Permeability and Mechanical Properties of Gradient Porous PDMS Scaffolds Fabricated by 3D-Printed Sacrificial Templates Designed with Minimal Surfaces.” Acta Biomaterialia 96:149–160. https://doi.org/10.1016/j.actbio.2019.06.040.
  • Oropallo, W., and L. A. Piegl. 2016. “Ten Challenges in 3D Printing.” Engineering with Computers 32:135–148. https://doi.org/10.1007/s00366-015-0407-0.
  • Ozkan, E., M. Garren, J. Manuel, M. Douglass, R. Devine, A. Mondal, A. Kumar, M. Ashcraft, R. Pandey, and H. Handa. 2023. “Superhydrophobic and Conductive Foams with Antifouling and Oil–Water Separation Properties.” ACS Applied Materials and Interfaces 15 (5): 7610–7626.
  • Paghi, A., M. Corsi, S. Corso, S. Mariani, and G. Barillaro. 2022. “In situ Controlled and Conformal Coating of Polydimethylsiloxane Foams with Silver Nanoparticle Networks with Tunable Piezo-Resistive Properties.” Nanoscale Horizons 7 (4): 425–436.
  • Pan, P., Z. Bian, X. Song, and X. Zhou. 2020. “Properties of Porous PDMS and Stretchability of Flexible Electronics in Moist Environment.” Journal of Applied Mechanics 87 (10): 101009. https://doi.org/10.1115/1.4047775
  • Pan, Z., Y. Guan, Y. Liu, and F. Cheng. 2021. “Facile Fabrication of Hydrophobic and Underwater Superoleophilic Elastic and Mechanical Robust Graphene/PDMS Sponge for Oil/Water Separation.” Separation and Purification Technology 261:118273. https://doi.org/10.1016/j.seppur.2020.118273.
  • Peçenek, H., M. S. O. Fatma Kılıç Dokan, E. Yılmaz, and E. Sahmetlioglu. 2022. “Highly Compressible Binder-Free Sponge Supercapacitor Electrode Based on Flower-Like NiO/MnO2/CNT.” Journal of Alloys and Compounds 913:165053. https://doi.org/10.1016/j.jallcom.2022.165053.
  • Peng, H., J. Huang, M. Zhao, Q. Zhang, X. Cheng, X. Liu, W. Qian, and F. Wei. 2014. “Nanoarchitectured Graphene/CNT@ Porous Carbon with Extraordinary Electrical Conductivity and Interconnected Micro/Mesopores for Lithium‐Sulfur Batteries.” Advanced Functional Materials 24 (19): 2772–2781. https://doi.org/10.1002/adfm.201303296.
  • Pharino, U., Y. Sinsanong, S. Pongampai, T. Charoonsuk, P. Pakawanit, S. Sriphan, N. Vittayakorn, and W. Vittayakorn. 2021. “Influence of Pore Morphologies on the Mechanical and Tribo-Electrical Performance of Polydimethylsiloxane Sponge Fabricated via Commercial Seasoning Templates.” Radiation Physics & Chemistry 189:109720. https://doi.org/10.1016/j.radphyschem.2021.109720.
  • Pruvost, M., W. J. Smit, C. Monteux, P. Poulin, and A. Colin. 2019. “Polymeric Foams for Flexible and Highly Sensitive Low-Pressure Capacitive Sensors.” Npj Flexible Electronics 3 (1): 7. https://doi.org/10.1038/s41528-019-0052-6.
  • Qiang, F., S.-W. Dai, Z. Li, L.-X. Gong, G.-D. Zhang, J.-X. Jiang, and L.-C. Tang. 2019. “An Insulating Second Filler Tuning Porous Conductive Composites for Highly Sensitive and Fast Responsive Organic Vapor Sensor.” Sensors and Actuators B, Chemical 285:254–263. https://doi.org/10.1016/j.snb.2019.01.043.
  • Seo, Y., K. Seongchan, H. Heebo, N. Qaiser, M. Leem, S. Jo Yoo, J. Hyeon Jeong, K. Lee, and B. Hwang. 2022. “Stretchable Carbonyl Iron Powder/Polydimethylsiloxane Composites for Noise Suppression in Gigahertz Bandwidth.” Composites Science and Technology 218:109150. https://doi.org/10.1016/j.compscitech.2021.109150.
  • Shieh, J.-Y., S.-Y. Tsai, L. Bo-Yan, and Y. Hsin Her. 2017. “High-Performance Flexible Supercapacitor Based on Porous Array Electrodes.” Materials Chemistry and Physics 195:114–122. https://doi.org/10.1016/j.matchemphys.2017.04.034.
  • Song, Y., H. Chen, S. Zongming, X. Chen, L. Miao, J. Zhang, X. Cheng, and H. Zhang. 2017. “Highly Compressible Integrated Supercapacitor–Piezoresistance‐sensor System with CNT–PDMS Sponge for Health Monitoring.” Small 13 (39): 1702091. https://doi.org/10.1002/smll.201702091.
  • Song, W.-J., S. Lee, G. Song, H. Bin Son, D.-Y. Han, I. Jeong, Y. Bang, and S. Park. 2020. “Recent Progress in Aqueous Based Flexible Energy Storage Devices.” Energy Storage Materials 30:260–286. https://doi.org/10.1016/j.ensm.2020.05.006.
  • Stoller, M. D., C. W. Magnuson, Y. Zhu, S. Murali, J. Won Suk, R. Piner, and R. S. Ruoff. 2011. “Interfacial Capacitance of Single Layer Graphene.” Energy & Environmental Science 4 (11): 4685–4689.
  • Sun, X., J. Sun, L. Tong, S. Zheng, C. Wang, W. Tan, J. Zhang, C. Liu, M. Tianjun, and Q. Zhimei. 2019. “Flexible Tactile Electronic Skin Sensor with 3D Force Detection Based on Porous CNTs/PDMS Nanocomposites.” Nano-Micro Letters 11:1–14. https://doi.org/10.1007/s40820-019-0288-7.
  • Szalai, S., S. S. Kocsis, D. Harangozó, and S. Fischer 2022. “Investigation of Deformations of a Lithium Polymer Cell Using the Digital Image Correlation Method (DICM).” Reports in Mechanical Engineering 3 (2): 206–224. https://doi.org/10.31181/rme20008022022s.
  • Tantraviwat, D., P. Buarin, S. Suntalelat, W. Sripumkhai, P. Pattamang, G. Rujijanagul, and B. Inceesungvorn. 2020. “Highly Dispersed Porous Polydimethylsiloxane for Boosting Power-Generating Performance of Triboelectric Nanogenerators.” Nano Energy 67:104214. https://doi.org/10.1016/j.nanoen.2019.104214.
  • Tan, X., and J. Zheng. 2022. “A Novel Porous PDMS-AgNWs-PDMS (PAP)-Sponge-Based Capacitive Pressure Sensor.” Polymers 14 (8): 1495. https://doi.org/10.3390/polym14081495.
  • Turco, A., A. Grazia Monteduro, F. Montagna, E. Primiceri, M. Frigione, and G. Maruccio. 2023. “The Effect of Synthetic Conditions on Piezoresistive Properties of Ultrasensitive Carbon Nanotube/PDMS 3D Composites.” Polymer 264:125534. https://doi.org/10.1016/j.polymer.2022.125534.
  • Turco, A., E. Primiceri, M. Frigione, G. Maruccio, and C. Malitesta. 2017. “An Innovative, Fast and Facile Soft-Template Approach for the Fabrication of Porous PDMS for Oil–Water Separation.” Journal of Materials Chemistry A 5 (45): 23785–23793.
  • Ulbricht, M. 2006. “Advanced Functional Polymer Membranes.” Polymer 47 (7): 2217–2262.
  • Wang, H., M. Han, Y. Song, and H. Zhang. 2021. “Design, Manufacturing and Applications of Wearable Triboelectric Nanogenerators.” Nano Energy 81:105627. https://doi.org/10.1016/j.nanoen.2020.105627
  • Wang, D., H. Liu, F. Liu, M. Guorong, J. Yang, G. Xiaodan, M. Zhou, and Z. Chen. 2021. “Phase-Separation-Induced Porous Lithiophilic Polymer Coating for High-Efficiency Lithium Metal Batteries.” Nano Letters 21 (11): 4757–4764.
  • Wang, C., P. Wang, J. Chen, L. Zhu, D. Zhang, Y. Wan, and A. Shiyun. 2022. “Self-Powered Biosensing System Driven by Triboelectric Nanogenerator for Specific Detection of Gram-Positive Bacteria.” Nano Energy 93:106828. https://doi.org/10.1016/j.nanoen.2021.106828.
  • Woo, R., G. Chen, J. Zhao, and J. Bae. 2021. “Structure–Mechanical Property Relationships of 3D-Printed Porous Polydimethylsiloxane.” ACS Applied Polymer Materials 3 (7): 3496–3503. https://doi.org/10.1021/acsapm.1c00417.
  • Wu, X., Y. Han, X. Zhang, Z. Zhou, and C. Lu. 2016. “Large‐Area Compliant, Low‐Cost, and Versatile Pressure‐Sensing Platform Based on Microcrack‐Designed Carbon Black@ Polyurethane Sponge for Human–Machine Interfacing.” Advanced Functional Materials 26 (34): 6246–6256.
  • Yang, Z., W. Zijian, D. Jiang, R. Wei, X. Mai, D. Pan, S. Vupputuri, L. Weng, N. Naik, and Z. Guo. 2021. “Ultra-Sensitive Flexible Sandwich Structural Strain Sensors Based on a Silver Nanowire Supported PDMS/PVDF Electrospun Membrane Substrate.” Journal of Materials Chemistry C 9 (8): 2752–2762. https://doi.org/10.1039/D0TC04659K.
  • Yu, C., C. Yu, L. Cui, Z. Song, X. Zhao, Y. Ma, and L. Jiang. 2017. “Facile Preparation of the Porous PDMS Oil‐Absorbent for Oil/Water Separation.” Advanced Materials Interfaces 4 (3): 1600862. https://doi.org/10.1002/admi.201600862
  • Zhang, S., M. Bick, X. Xiao, G. Chen, A. Nashalian, and J. Chen. 2021. “Leveraging Triboelectric Nanogenerators for Bioengineering.” Matter 4 (3): 845–887. https://doi.org/10.1016/j.matt.2021.01.006.
  • Zhang, W., H. Cheng, Q. Niu, F. Mingli, H. Huang, and Y. Daiqi. 2019. “Microbial Targeted Degradation Pretreatment: A Novel Approach to Preparation of Activated Carbon with Specific Hierarchical Porous Structures, High Surface Areas, and Satisfactory Toluene Adsorption Performance.” Environmental Science & Technology 53 (13): 7632–7640. https://doi.org/10.1021/acs.est.9b01159.
  • Zhang, G.-D., W. Zhi-Hao, Q.-Q. Xia, Q. Yong-Xiang, H.-T. Pan, H. Wan-Jun, L. Zhao, K. Cao, E.-Y. Chen, and Z. Yuan. 2021. “Ultrafast Flame-Induced Pyrolysis of Poly (Dimethylsiloxane) Foam Materials Toward Exceptional Superhydrophobic Surfaces and Reliable Mechanical Robustness.” ACS Applied Materials and Interfaces 13 (19): 23161–23172. https://doi.org/10.1021/acsami.1c03272.
  • Zhao, Y., X. Lei, X. Jiandong, L. Yunfan, W. Weiguang, X. Guo, T. Ren, and F. Liu. 2022. “High-Performance Porous PDMS-Based Piezoresistive Sensor Prepared by a Modified Microwave Irradiation Process.” ACS Applied Electronic Materials 4 (11): 5498–5505. https://doi.org/10.1021/acsaelm.2c01123.
  • Zhao, L., F. Qiang, S.-W. Dai, S.-C. Shen, Y.-Z. Huang, N.-J. Huang, G.-D. Zhang, L.-Z. Guan, J.-F. Gao, and Y.-H. Song. 2019. “Construction of Sandwich-Like Porous Structure of Graphene-Coated Foam Composites for Ultrasensitive and Flexible Pressure Sensors.” Nanoscale 11 (21): 10229–10238. https://doi.org/10.1039/C9NR02672J.
  • Zhong, W., X. Ding, L. Weixin, C. Shen, A. Yadav, Y. Chen, M. Bao, H. Jiang, and D. Wang. 2019. “Facile Fabrication of Conductive Graphene/Polyurethane Foam Composite and Its Application on Flexible Piezo-Resistive Sensors.” Polymers 11 (8): 1289. https://doi.org/10.3390/polym11081289.
  • Zhou, L., J. Rada, H. Zhang, H. Song, S. Mirniaharikandi, B. S. Ooi, and Q. Gan. 2021. “Sustainable and Inexpensive Polydimethylsiloxane Sponges for Daytime Radiative Cooling.” Advanced Science 8 (23): 2102502. https://doi.org/10.1002/advs.202102502.
  • Zhu, D., S. Handschuh-Wang, and X. Zhou. 2017. “Recent Progress in Fabrication and Application of Polydimethylsiloxane Sponges.” Journal of Materials Chemistry A 5 (32): 16467–16497. https://doi.org/10.1039/C7TA04577H.