Highly Efficient 3D-Printed Graphene Strain Sensors Using Fused Deposition Modeling with Filament Deposition Techniques

References

• Aga, R. S., T. M. Webb, T. Pandhi, R. Aga, D. Estrada, K. M. Burzynski, C. M. Bartsch, and E. M. Heckman. 2021. “Laser-Defined Graphene Strain Sensor Directly Fabricated on 3D-Printed Structure.” Flexible and Printed Electronics 6 (3): 032001. https://doi.org/10.1088/2058-8585/abf0f8.
   Web of Science ®Google Scholar
• Ahmed, S., S. Nauman, and Z. Muhammad Khan. 2021. “Development of TPU/CNPs Flexible Composite Strain Sensors Using Additive Manufacturing (AM) for Structural Health Monitoring (SHM) of Aerospace Components.” 2021 International Bhurban Conference on Applied Sciences and Technologies (IBCAST), Pakistan.
   Google Scholar
• Amjadi, M., K.-U. Kyung, I. Park, and M. Sitti. 2016. “Stretchable, Skin-Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review.” Advanced Functional Materials 26 (11): 1678–11. https://doi.org/10.1002/adfm.201504755.
   Web of Science ®Google Scholar
• Barth, F. G. 2004. “Spider mechanoreceptors.” Current Opinion in Neurobiology 14 (4): 415–422.
   PubMed Web of Science ®Google Scholar
• Barth, F. G. 2019. “Mechanics to Pre-Process Information for the Fine Tuning of Mechanoreceptors.” Journal of Comparative Physiology A 205 (5): 661–686.
   Web of Science ®Google Scholar
• Cheng, S., Y. S. Narang, C. Yang, Z. Suo, and R. D. Howe. 2019. “Stick‐On Large‐Strain Sensors for Soft Robots.” Advanced Materials Interfaces 6 (20): 1900985.
   Web of Science ®Google Scholar
• Cheng-Yu, H., Z. Ahmed Abro, Z. Yi-Fan, and R. Ahmed Lakho. 2021. “An FBG-Based Smart Wearable Ring Fabricated Using FDM for Monitoring Body Joint Motion.” Journal of Industrial Textiles 50 (10): 1660–1673. https://doi.org/10.1177/1528083719870204.
   Web of Science ®Google Scholar
• Choi, H. Y., E. Joo Shin, and S. Hee Lee. 2022. “Design and Evaluation of 3D-Printed Auxetic Structures Coated by CWPU/Graphene as Strain Sensor.” Scientific Reports 12 (1): 7780.
   PubMed Web of Science ®Google Scholar
• Chun, S., Y. Choi, and W. Park. 2017. “All-Graphene Strain Sensor on Soft Substrate.” Carbon 116:753–759. https://doi.org/10.1016/j.carbon.2017.02.058.
   Web of Science ®Google Scholar
• Garcia-Pozuelo, D., O. Olatunbosun, J. Yunta, X. Yang, and V. Diaz. 2017. “A Novel Strain-Based Method to Estimate Tire Conditions Using Fuzzy Logic for Intelligent Tires.” Sensors 17 (2): 350.
   PubMed Web of Science ®Google Scholar
• Georgopoulou, A., T. Sebastian, and F. Clemens. 2020. “Thermoplastic Elastomer Composite Filaments for Strain Sensing Applications Extruded with a Fused Deposition Modelling 3D Printer.” Flexible and Printed Electronics 5 (3): 035002.
   Web of Science ®Google Scholar
• Georgopoulou, A., B. Vanderborght, and F. Clemens. 2021. “Fabrication of a Soft Robotic Gripper with Integrated Strain Sensing Elements Using Multi-Material Additive Manufacturing.” Frontiers in Robotics and AI 8. https://doi.org/10.3389/frobt.2021.615991.
   Web of Science ®Google Scholar
• Griffith, A. A., and G. Ingram Taylor. 1921. “VI. The Phenomena of Rupture and Flow in Solids.” Philosophical Transactions of the Royal Society of London, Series A, Containing Papers of a Mathematical or Physical Character 221 (582–593): 163–198. https://doi.org/10.1098/rsta.1921.0006.
   Google Scholar
• Guo, Z., X. Jiawen, Y. Chen, Z. Guo, Y. Peishi, Y. Liu, and J. Zhao. 2019. “High-sensitive and stretchable resistive strain gauges: Parametric design and DIW fabrication.” Composite Structures 223:110955. https:///doi.org/10.1016/j.compstruct.2019.110955.
   Web of Science ®Google Scholar
• Ha, H., S. Müller, R. Baumann, and B. Hwang. 2023. “PeakForce Quantitative Nanomechanical Mapping for Surface Energy Characterization on the Nanoscale: A Mini-Review.” PeakForce Quantitative Nanomechanical Mapping for Surface Energy Characterization on the Nanoscale: A Mini-ReviewFacta Universitatis. Series: Mechanical Engineering. https://doi.org/10.22190/FUME221126001H.
   Google Scholar
• Ha, H., N. Qaiser, T. Yun, J. Cheong, S. Lim, and B. Hwang. 2023. “Sensing Mechanism and Application of Mechanical Strain Sensor: a Mini-Review.” Facta Universitatis, Series: Mechanical Engineering. https://doi.org/10.22190/FUME230925043H.
   Web of Science ®Google Scholar
• Hwang, B., Y., Han, P., Matteini 2022. “Bending Fatigue Behavior of Ag Nanowire/Cu Thin-Film Hybrid Interconnects for Wearable Electronics.” Facta Universitatis, Series: Mechanical Engineering 20 (3): 553–560. https://doi.org/10.22190/FUME220730040H.
   Web of Science ®Google Scholar
• Ji-Huan, H., and N. Y. Abd Elazem. 2022. “The Carbon Nanotube-Embedded Boundary Layer Theory for Energy Harvesting.” Facta Universitatis, Series: Mechanical Engineering 20 (2): 211–235. https://doi.org/10.22190/fume220221011h
   Web of Science ®Google Scholar
• Kang, I., M. J. Schulz, J. H. Kim, V. Shanov, and D. Shi. 2006. “A Carbon Nanotube Strain Sensor for Structural Health Monitoring.” Smart Materials & Structures 15 (3): 737.
   Web of Science ®Google Scholar
• Kim, H., N. Qaiser, and B. Hwang. 2023. “Electro-Mechanical Response of Stretchable Pdms Composites with a Hybrid Filler System.” Facta Universitatis, Series: Mechanical Engineering 21 (1): 51–61. https://doi.org/10.22190/FUME221205002K.
   Web of Science ®Google Scholar
• Kim, Y. J., J. Seob Choi, and J.-H. Yim. 2022. “Effects of Infill Patterns on Resistance-Dependent Strain and Ammonia Gas Sensing Behaviors of 3D-Printed Thermoplastic Polyurethane Modified with Polypyrrole.” Journal of Materials Chemistry C 10 (17): 6687–6695.
   Web of Science ®Google Scholar
• Kim, H., B. R. Wilburn, E. Castro, C. A. Garcia Rosales, L. A. Chavez, T.-L. Bill Tseng, and Y. Lin. 2019. “Multifunctional SENSING using 3D printed CNTs/BaTiO3/PVDF nanocomposites.” Journal of Composite Materials 53 (10): 1319–1328.
   Web of Science ®Google Scholar
• Larraza, I., J. Vadillo, T. Calvo-Correas, A. Tejado, S. Olza, C. Peña-Rodríguez, A. Arbelaiz, and A. Eceiza. 2021. “Cellulose and Graphene Based Polyurethane Nanocomposites for Fdm 3d Printing: Filament Properties and Printability.” Polymers 13 (5): 839.
   PubMed Web of Science ®Google Scholar
• Lian, H., M. Xue, M. Kanglin, M. Deyun, L. Wang, Z. Cui, and X. Chen. 2022. “Three-Dimensional Printed Carbon Black/PDMS Composite Flexible Strain Sensor for Human Motion Monitoring.” Micromachines 13 (8): 1247.
   PubMed Web of Science ®Google Scholar
• Liao, X., Z. Zhang, Z. Kang, F. Gao, Q. Liao, and Y. Zhang. 2017. “Ultrasensitive and Stretchable Resistive Strain Sensors Designed for Wearable Electronics.” Materials Horizons 4 (3): 502–510. https://doi.org/10.1039/C7MH00071E.
   Web of Science ®Google Scholar
• Liqiang, X., Q. Sun, and L. Yebo. 2023. “Flexible Strain Sensor with a Hat-Shaped Structure for in situ Measurement of 3D Deformation.” Applied Physics Letters 122 (5): 054101.
   Web of Science ®Google Scholar
• Liu, H., H. Zhang, W. Han, H. Lin, L. Ruizi, J. Zhu, and W. Huang. 2021. “3D Printed Flexible Strain Sensors: From Printing to Devices and Signals.” Advanced Materials 33 (8): 2004782. https://doi.org/10.1002/adma.202004782.
   Web of Science ®Google Scholar
• Li, B., S. Zhang, L. Zhang, Y. Gao, and F. Xuan. 2022. “Strain Sensing Behavior of FDM 3D Printed Carbon Black Filled TPU with Periodic Configurations and Flexible Substrates.” Journal of Manufacturing Processes 74:283–295. https://doi.org/10.1016/j.jmapro.2021.12.020.
   Web of Science ®Google Scholar
• Lorussi, F., E. Pasquale Scilingo, M. Tesconi, A. Tognetti, and D. De Rossi. 2005. “Strain Sensing Fabric for Hand Posture and Gesture Monitoring.” IEEE Transactions on Information Technology in Biomedicine 9 (3): 372–381.
   PubMedGoogle Scholar
• Maurizi, M., F. Cianetti, J. Slavič, G. Zucca, and M. Palmieri. 2019. “Piezoresistive Dynamic Simulations of FDM 3D-Printed Embedded Strain Sensors: A New Modal Approach.” Procedia Structural Integrity 24:390–397. https://doi.org/10.1016/j.prostr.2020.02.036.
   Google Scholar
• Maurizi, M., J. Slavič, F. Cianetti, M. Jerman, J. Valentinčič, A. Lebar, and M. Boltežar. 2019. “Dynamic Measurements Using FDM 3D-Printed Embedded Strain Sensors.” Sensors 19 (12): 2661.
   PubMed Web of Science ®Google Scholar
• Milić, P., Marinković, D., & Ćojbašić, Ž. 2023. “Geometrically Nonlinear Analysis of Piezoelectric Active Laminated Shells by Means of Isogeometric FE Formulation.” Facta Universitatis-Series Mechanical Engineering. https://doi.org/10.22190/FUME050123059M.
   Google Scholar
• Milić, P., Marinković, D., Klinge, S., Ćojbašić Ž. 2023. “Reissner-Mindlin Based Isogeometric Finite Element Formulation for Piezoelectric Active Laminated Shells.” Tehnički vjesnik 30 (2): 416–425. https://doi.org/10.17559/TV-20230128000280.
   Web of Science ®Google Scholar
• Munasinghe, N., M. Woods, L. Miles, and G. Paul. 2019. “3-D Printed Strain Sensor for Structural Health Monitoring.” 2019 IEEE International Conference on Cybernetics and Intelligent Systems (CIS) and IEEE Conference on Robotics, Thailand. Automation and Mechatronics (RAM).
   Google Scholar
• Myeongjong, G., Q. Xue, P. Matteini, B. Hwang, and S. Lim. 2021. “High Resolution Screen-Printing of Carbon Black/Carbon Nanotube Composite for Stretchable and Wearable Strain Sensor with Controllable Sensitivity.” Sensors and Actuators A, Physical 332:113098. https://doi.org/10.1016/j.sna.2021.113098.
   Web of Science ®Google Scholar
• Na, H. R., H. Joo Lee, J. Ho Jeon, H.-J. Kim, S.-K. Jerng, S. Baran Roy, S.-H. Chun, S. Lee, and Y. Ju Yun. 2022. “Vertical Graphene on Flexible Substrate, Overcoming Limits of Crack-Based Resistive Strain Sensors.” Npj Flexible Electronics 6 (1): 2. https://doi.org/10.1038/s41528-022-00135-1.
   Google Scholar
• Nyiranzeyimana, G., J. M. Mutua, T. Ochuku Mbuya, B. R. Mose, and E. Bisengimana. 2022. “Fused Deposition Modelling (FDM) Process Parameter Optimization to Minimize Residual Stresses of 3 D Printed Carbon Fiber Nylon 12 Hip Joint Implant.” Materialwissenschaft und Werkstofftechnik 53 (10): 1184–1199.
   Web of Science ®Google Scholar
• Park, S.-C., I.-H. Lee, Y.-H. Bae, and H.-C. Kim. 2019. “Optimization of Manufacturing Conditions of Pressure-Sensitive Ink Based on MWCNTs.” Journal of the Korean Society of Manufacturing Process Engineers 18 (8): 1–7.
   Google Scholar
• Qian, C., T. Xiao, Y. Chen, N. Wang, B. Li, and Y. Gao. 2022. “3D Printed Reduced Graphene Oxide/Elastomer Resin Composite with Structural Modulated Sensitivity for Flexible Strain Sensor.” Advanced Engineering Materials 24 (4): 2101068.
   Web of Science ®Google Scholar
• Seyedin, S., S. Uzun, A. Levitt, B. Anasori, G. Dion, Y. Gogotsi, and J. M. Razal. 2020. “MXene Composite and Coaxial Fibers with High Stretchability and Conductivity for Wearable Strain Sensing Textiles.” Advanced Functional Materials 30 (12): 1910504.
   Web of Science ®Google Scholar
• Shintake, J., Y. Piskarev, S. Hee Jeong, and D. Floreano. 2018. “Ultrastretchable Strain Sensors Using Carbon Black-Filled Elastomer Composites and Comparison of Capacitive versus Resistive Sensors.” Advanced Materials Technologies 3 (3): 1700284. https://doi.org/10.1002/admt.201700284.
   Web of Science ®Google Scholar
• Shuang, L., G. Liu, L. Wang, G. Fang, and S. Yewang. 2020. “Overlarge Gauge Factor Yields a Large Measuring Error for Resistive‐Type Stretchable Strain Sensors.” Advanced Electronic Materials 6 (11): 2000618.
   Web of Science ®Google Scholar
• Souri, H., H. Banerjee, A. Jusufi, N. Radacsi, A. A. Stokes, I. Park, M. Sitti, and M. Amjadi. 2020. “Wearable and Stretchable Strain Sensors: Materials, Sensing Mechanisms, and Applications.” Advanced Intelligent Systems 2 (8): 2000039. https://doi.org/10.1002/aisy.202000039.
   Google Scholar
• Tao, L.-Q., D.-Y. Wang, H. Tian, J. Zhen-Yi, Y. Liu, Y. Pang, Y.-Q. Chen, Y. Yang, and T.-L. Ren. 2017. “Self-Adapted and Tunable Graphene Strain Sensors for Detecting Both Subtle and Large Human Motions.” Nanoscale 9 (24): 8266–8273. https://doi.org/10.1039/C7NR01862B.
   PubMed Web of Science ®Google Scholar
• Wang, Y., L. Wang, T. Yang, L. Xiao, X. Zang, M. Zhu, K. Wang, W. Dehai, and H. Zhu. 2014. “Wearable and Highly Sensitive Graphene Strain Sensors for Human Motion Monitoring.” Advanced Functional Materials 24 (29): 4666–4670. https://doi.org/10.1002/adfm.201400379.
   Web of Science ®Google Scholar
• Xue, Q., H. Heebo, B. Hwang, and S. Lim. 2020. “Printability of the Screen-Printed Strain Sensor with Carbon Black/Silver Paste for Sensitive Wearable Electronics.” Applied Sciences 10 (19): 6983.
   Google Scholar
• Xue, Q., P. Matteini, B. Hwang, and S. Lim. 2023. “Roll Stamped Ni/MWCNT Composites for Highly Reliable Cellulose Paper-Based Strain Sensor.” Cellulose 30 (3): 1543–1552. https://doi.org/10.1007/s10570-022-04970-3.
   Web of Science ®Google Scholar
• Yan, T., W. Yuting, Y. Wen, and Z. Pan. 2021. “Recent Progress on Fabrication of Carbon Nanotube-Based Flexible Conductive Networks for Resistive-Type Strain Sensors.” Sensors and Actuators A, Physical 327:112755. https://doi.org/10.1016/j.sna.2021.112755.
   Web of Science ®Google Scholar
• Yizong, L., Y. Liu, S. Rifat Alam Bhuiyan, Y. Zhu, and S. Yao. 2022. “Printed Strain Sensors for On‐Skin Electronics.” Small Structures 3 (2): 2100131.
   Google Scholar
• Zhang, H., K. Fuyou, J. Shao, C. Wang, H. Wang, and Y. Chen. 2022. “One-Step Fabrication of Highly Sensitive Pressure Sensor by All FDM Printing.” Composites Science and Technology 226:109531. https://doi.org/10.1016/j.compscitech.2022.109531.
   Web of Science ®Google Scholar
• Zhao, Y., Y. Liu, L. Yongqian, and Q. Hao. 2020. “Development and Application of Resistance Strain Force Sensors.” Sensors 20 (20): 5826.
   PubMed Web of Science ®Google Scholar