Influence of WC-Co knifes pre-treatment with drag finishing method subjected to tool coatings deposition on blunting process

References

• Biermann, D., and Baschin, A., 2009. Influence of cutting edge geometry and cutting edge radius on the stability of micromilling processes. Production Engineering - Research and Development, 3, 375–380. doi:10.1007/s11740-009-0188-7.
   Google Scholar
• Bouzakis, K.D., et al., 2002. Effect of the cutting edge radius and its manufacturing procedure, on the milling performance of PVD coated cemented carbide inserts. CIRP Annals, 51 (1), 61–64.
   Web of Science ®Google Scholar
• Bouzakis, K.D., et al., January 2003. Optimisation of the cutting edge roundness and its manufacturing procedures of cemented carbide inserts, to improve their milling performance after a PVD coating deposition. Surface and Coatings Technology, 30 (163-164), 625–630. doi:10.1016/S0257-8972(02)00687-4.
   Google Scholar
• Cselle, T., 2007. Influence of edge preparation on the performance of coated cutting tools invited talk of international conference on metallurgical coatings and thin films San Diego, 2nd of May.
   Google Scholar
• Czarniak, P., et al., 2023. Micro geometry analysis of WC-Co carbide blades modified with PVD coating subjected to blunting during milling in chipboard. Wood Materials Science and Engineering, in review.
   Web of Science ®Google Scholar
• Denkena, B., Kohler, J., and Rehe, M., 2010. Einsatz hochharter Scneidstoffe beim schleifen. Wissenschaft & Forschung. Produktionstechnisches Zentrum der Leibniz Universität Hannover.
   Google Scholar
• Fulemova, J., and Rehor, J., 2015. Influence of Form Factor of the cutting edge on tool life during finishing milling. 25th DAAAM International Symposium on Intelligent Manufacturing and Automatation 2014. Procedia Engineering, 100, 682–688.
   Google Scholar
• ISO 3340 (PN-76/D-04245). Contribution of mineral contamination in particleboards.
   Google Scholar
• Kucharska, B., et al., 2022. Comparison study of PVD coatings: TiN/AlTiN, TiN and TiAlSiN used in wood machining. Materials, 15, 7159. doi:10.3390/ma15207159.
   PubMed Web of Science ®Google Scholar
• Mellage, B., 1998. Evaluation of diamond coated inserts in the routing of particleboard. MSc thesis. North Carolina State University, Raleigh, North Carolina.
   Google Scholar
• Panjan, M., et al., 2014. Designing the color of AlTiN hard coating through interference effect. Surface and Coatings Technology, 254, 65–72.
   Web of Science ®Google Scholar
• PN-EN 310. Flexural strength, modulus of elasticity.
   Google Scholar
• PN-EN 319. Tensile strength.
   Google Scholar
• Porankiewicz, B., 2003. Tępienie się ostrzy i jakość przedmiotu obrabianego w skrawaniu płyt wiórowych. Rozprawy Naukowe Nr 341, Wyd. Akademia Rolnicza Poznań.
   Google Scholar
• Quinto, D. Twenty-five years of pvd coatings at the cutting edge, Oerlikon Balzers Coating USA Inc, Presented at the 50th SVC TechCon in Louisville, KY, in the Donald M. Mattox Tutorial Program on May 1, 2007.
   Google Scholar
• Rech, J., 2006. Influence of cutting edge preparation on the wear resistance in high speed dry gear hobbing. Wear, 261, 505–512.
   Web of Science ®Google Scholar
• Rech, J., et al., 2006. Influence of cutting edge radius on the wear resistance of PM-HSS milling inserts. Wear, 259, 1168–1176.
   Web of Science ®Google Scholar
• Sheikh-Ahmad, J.Y., and Morita, T., 2001. Tool coatings for wood machining. In: Proc. 15th International Wood Machining Seminar, July 30-August 1, 2001, Los Angeles, California, USA.
   Google Scholar
• Sheikh-Ahmad, J.Y., Stewart, J.S., and Feld, H., 2003. Failure characteristics of diamond-coated carbides in machining wood-based composites. Wear, 255, 1433–1437.
   Web of Science ®Google Scholar
• Staniszewski, J., and Porankiewicz, B., 1978. Kryteria i metody oceny stopnia stępienia ostrzy narzędzi skrawających do obróbki drewna, Wyd. Akademia Rolnicza Poznań.
   Google Scholar
• Zhuyu, L., et al., 2018. Electrolytic abrasive edge honing of cemented carbide cutting tools. IOP Conference Series: Materials Science and Engineering, 382, 032052. doi:10.1088/1757-899X/382/3/032052.
   Google Scholar