Cutting speed and feed-per-knife effects on surface quality of cants produced by a chipper-canter

References

• ASTM D2395, 2017. Standard test methods for density and specific gravity (relative density) of wood and wood-based materials. West Conshohocken, PA: ASTM International.
   Google Scholar
• ASTM D4442, 2016. Standard test methods for direct moisture content measurement of wood and wood-based materials. West Conshohocken, PA: ASTM International.
   Google Scholar
• Belley, D., et al., 2019. Computed tomography (CT) scanning of internal log attributes prior to sawing increases lumber value in white spruce (Picea glauca) and jack pine (Pinus banksiana). Canadian Journal of Forest Research, 49 (12), 1516–1524. DOI:10.1139/cjfr-2018-0409.
   Google Scholar
• Bourscheid, C., et al., 2022. Effects of cutting speed and feed per knife on size distribution of pulp chips produced by a chipper-canter from frozen and unfrozen logs. Wood Material Science and Engineering. DOI:10.1080/17480272.2022.2115398.
   Web of Science ®Google Scholar
• Cáceres, C.B., Uliana, L.R., and Hernández, R.E., 2018. Orthogonal cutting study of wood and knots of white spruce. Wood and Fiber Science, 50 (1), 55–65. DOI:10.22382/wfs-2018-006.
   Web of Science ®Google Scholar
• de Moura, L.F., and Hernández, R.E., 2006. Evaluation of varnish coating performance for three surfacing methods on sugar maple wood. Forest Products Journal, 56 (11–12), 130–136.
   Web of Science ®Google Scholar
• Elloumi, I., et al., 2023. Effects of log temperature, cutting width, and knots on the surface quality of the cants produced by a chipper-canter. Wood Material Science and Engineering (submitted).
   Web of Science ®Google Scholar
• Elloumi, I., Hernandez, R.E., Cáceres, C.B. and Blais, C., 2021. Effects of temperature and moisture content of logs on size distribution of black spruce chips produced by a chipper-canter at two cutting widths. BioResources, 16(4), 6684–6705. DOI:10.15376/biores.16.4.6684-6704.
   Web of Science ®Google Scholar
• Fredriksson, M., 2014. Log sawing position optimization using computed tomography scanning. Wood Material Science & Engineering, 9 (2), 110–119. doi: 10.1080/17480272.2014.904430
   Google Scholar
• Fredriksson, M., et al., 2017. Knot detection in computed tomography images of partially dried jack pine (Pinus banksiana) and white spruce (Picea glauca) logs from a Nelder type plantation. Canadian Journal of Forest Research, 47 (7), 910–915. DOI:10.1139/cjfr-2016-0423.
   Google Scholar
• Ghosh, S.C., Hernández, R.E., and Blais, C., 2015. Effect of knife wear on surface quality of black spruce cants produced by a chipper-canter. Wood and Fiber Science, 47 (4), 355–364.
   Web of Science ®Google Scholar
• Hernández, R.E., et al., 2013. Effect of the cutting speed on the surface quality of black spruce cants produced by a chipper-canter. Forest Products Journal, 63 (1/2), 39–46. doi: 10.13073/FPJ-D-13-00016
   Web of Science ®Google Scholar
• Hernández, R.E., and Cool, J., 2008. Effects of cutting parameters on surface quality of paper birch wood machined across the grain with two planning techniques. Holz als Roh und Werkstoff, 66 (2), 147–154. doi: 10.1007/s00107-007-0222-4
   Google Scholar
• Hernández, R.E., Kuljich, S., and Koubaa, A., 2010. Effect of cutting width and cutting height on the surface quality of black spruce cants produced by a chipper-canter. Wood and Fiber Science, 42 (3), 273–284.
   Web of Science ®Google Scholar
• Hernández, R.E., Llavé, A.M., and Koubaa, A., 2014a. Effects of cutting parameters on cutting forces and surface quality of black spruce cants. European Journal of Wood and Wood Products, 72 (1), 107–116. DOI:10.1007/s00107-013-0762-8.
   Web of Science ®Google Scholar
• Hernández, R.E., Passarini, L., and Koubaa, A., 2014b. Effects of temperature and moisture content on selected wood mechanical properties involved in the chipping process. Wood Science and Technology, 48 (6), 1281–1301. DOI:10.1007/s00226-014-0673-9.
   Web of Science ®Google Scholar
• Hernández, R.E., and Quirion, B., 1993. Effect of a chipper-canter knife clamp on the quality of chips produced from black spruce. Forest Products Journal, 43 (9), 8–14.
   Web of Science ®Google Scholar
• Iskra, P., and Hernández, R.E., 2010. Toward a process monitoring and control of a CNC wood router: development of an adaptive control system for routing white birch. Wood and Fiber Science, 42 (4), 523–535.
   Web of Science ®Google Scholar
• ISO - International Organization for Standardization. 16610-31, 2016. Geometrical product specifications (GPS) — filtration — part 31: robust profile filters: Gaussian regression filters. London, UK: International Standards Organization.
   Google Scholar
• ISO - International Organization for Standardization. 21920-2, 2021. Geometrical product specifications (GPS) — surface texture: profile — part 2: terms, definitions and surface texture parameters. London, UK: International Standards Organization.
   Google Scholar
• Jackson, M.R., Hynek, P., and Parkin, R.M., 2007. On planning machine engineering characteristics and machined timber surface quality. Proceedings of the Institution of Mechanical Engineering Part E, Journal of Process Mechanical Engineering, 221 (1), 17–32. DOI:10.1243/0954408JPME100.
   Google Scholar
• Jackson, M., Parkin, R., and Brown, N., 2002. Waves on wood. Proceedings of the Institute of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 216, 475–497. doi: 10.1243/0954405021520175
   Web of Science ®Google Scholar
• Kuljich, S., et al., 2013a. Effects of cutting direction, rake angle, and depth of cut on cutting forces and surface quality during machining of balsam fir. Wood and Fiber Science, 45 (2), 195–205.
   Web of Science ®Google Scholar
• Kuljich, S., Cool, J., and Hernández, R.E., 2013b. Evaluation of two surfacing methods on black spruce wood in relation to gluing performance. Journal of Wood Science, 59 (3), 185–194. doi: 10.1007/s10086-012-1318-y
   Web of Science ®Google Scholar
• Kuljich, S., Hernández, R.E., and Blais, C., 2017a. Effects of cutterhead diameter and log infeed position on surface quality of black spruce cants produced by a chipper-canter. Wood and Fiber Science, 49 (3), 1–14.
   Web of Science ®Google Scholar
• Kuljich, S., Hernández, R.E., and Blais, C., 2017b. Effects of the cutterhead diameter and log infeed position on size distribution of pulp chips produced by a chipper–canter. European Journal of Wood and Wood Products, 75 (5), 747–760. DOI:10.1007/s00107-016-1150-y.
   Web of Science ®Google Scholar
• Lemaster, R.L., Lu, L., and Jackson, S., 2000. The use of process monitoring techniques on a CNC wood router – part 1: sensor selection. Forest Products Journal, 50 (7/8), 31–38.
   Web of Science ®Google Scholar
• Meulenberg, V., Ekevad, M. and Svensson, M., 2021. Thin kerf cutting forces of frozen and non-frozen Norway spruce and Scots pine wood. Wood Material Science & Engineering, 16(6), 414–420. DOI:10.1080/17480272.2021.1925964.
   Web of Science ®Google Scholar
• Montgomery, D.C., 2019. Design and analysis of experiments. 10th ed. John Wiley & Sons. ISBN: 978-1-119-49244-3, 688pp.
   Google Scholar
• Nasir, V., and Cool, J., 2020. A review on wood machining: characterization, optimization, and monitoring of the sawing process. Wood Material Science & Engineering, 15 (1), 1–16. DOI:10.1080/17480272.2018.1465465.
   Web of Science ®Google Scholar
• Nasir, V., and Cool, J., 2021. Cutting power and surface quality in sawing kiln-dried, green, and frozen hem-fir wood. Wood Science and Technology, 55 (2), 505–519. DOI:10.1007/s00226-020-01259-1.
   Web of Science ®Google Scholar
• Öhman, M., et al., 2016. Moistening of the wood surface before planing for improved surface quality. Wood Material Science & Engineering, 11 (3), 156–163. DOI:10.1080/17480272.2016.1166395.
   Web of Science ®Google Scholar
• Omori, C.S., and Schajer, G.S., 2022. Log grading and knot identification by oblique X-ray scanning. Journal of Nondestructive Evaluation Diagnostics and Prognostics of Engineering Systems, 6 (2), 1–18. DOI:10.1115/1.4056342.
   Google Scholar
• Orlowski, K., et al., 2009. Sawing frozen wood with narrow kerf saws: energy and quality effects. Forest Products Journal, 59 (3), 79–83.
   Web of Science ®Google Scholar
• Rojas, G., et al., 2005. Exploration of the physical properties of internal characteristics of sugar maple logs and relationships with CT images. Wood and Fiber Science, 37 (4), 591–604.
   Web of Science ®Google Scholar
• Rojas, G., et al., 2006. Identification of internal defects of sugar maple logs from CT images using supervising classification methods. Holz als Roh- und Werkstoff, 64 (4), 295–303. doi: 10.1007/s00107-006-0105-0
   Google Scholar
• Sandak, J., and Negri, M., 2005. Wood surface roughness – what is it? Proceedings of the 17th international wood machining seminar, Rosenheim, 26–28 September 2005, 242–250.
   Google Scholar
• Stewart, H.A., 1980. Some surfacing defects and problems related to wood moisture content. Wood and Fiber, 12 (3), 175–182.
   Web of Science ®Google Scholar
• Tabachnick, B.G., and Fidell, L.S., 2007. Using multivariate statistics. Boston: Allyn and Bacon.
   Google Scholar