Safety of rope-guided conveyance systems

REFERENCES

• BRAGS. (2015). Branschanvisningar for gruvhissar i Sverige. Sve. Min, Section 4.7.7, 93–95.
   Google Scholar
• Buchinski, K. W. (1993). Skip rotation: A collision course or controllable motion. In Proceedings of the 11th CIM Underground Operators Conference, Saskatoon, Canada.
   Google Scholar
• Dack, D. L. (1984). Hoist capacity increase at Central Canada Potash. In Proceedings of the 4th CIM Mechanical/Electrical Plant Engineering Conference, Saskatoon, Canada.
   Google Scholar
• Deep Mined Coal Industry Advisory Committee. (2004). Guidance on the selection, installation, maintenance and use of steel wire ropes in vertical mine shafts. Author.
   Google Scholar
• European Committee for Standardization. (2004). EN 12927-2: Safety requirements for cableway installations designed to carry persons – ropes – part 2: Safety factors. Author.
   Google Scholar
• Gray, E. W. (1961). The use of rope guides in deep shafts. The South African Mechanical Engineer, 60(11), 117–131.
   Google Scholar
• Greenway, M. E. (2008). Lateral stiffness and deflection of vertical ropes with application to mine shaft hoisting. Australian Journal of Mechanical Engineering, 5(1), 59–70. https://doi.org/10.1080/14484846.2008.11464535
   Google Scholar
• Greenway, M. E., Grobler, S. R., & Hamilton, R. S. (2017). Safety impact of increased shaft ventilation on rope guided conveyances. In Proceedings of the Australian Mine Ventilation Conference, Brisbane, Australia.
   Google Scholar
• Greenway, M. E., Jujnovich, B. A., Grobler, S. R., & Baroni, N. P. (2000). Behaviour of rope guided conveyances. In Proceedings of the Fifth International Mine Hoisting Conference, SAIMM Symposium Series S25, Johannesburg, South Africa (pp. 89–98).
   Google Scholar
• Hamilton, R. S. (2000). Rope-guided hoisting for 2000 and beyond – engineering rope guides for deep shafts. In Proceedings of the Fifth International Mine Hoisting Conference, SAIMM Symposium Series S25, Johannesburg, South Africa (pp. 83–88).
   Google Scholar
• International Organization for Standardization. (2021). ISO 19426-7:2021: Structures for mine shafts – part 7: Rope guides. Author.
   Google Scholar
• John, T. (1944). The installation and history of guide ropes at New Modderfontein Gold Mining Co. Ltd. Journal of the South African Institution of Civil Engineering.
   Google Scholar
• Krige, G. J. (2005). Guidelines for the design of rope guides. In Proceedings of Hoist and Haul 2005 (pp. 275–283). The Australasian Institute of Mining and Metallurgy.
   Google Scholar
• Mahmoud, K. M. (Ed.). (2006). Advances in cable-supported bridges. In Selected papers from the 5th International Cable-Supported Bridge Operator’s Conference. CRC Press.
   Google Scholar
• McClelland, A. E. (1950). Failures in wire ropes in British colliery practice: Wire ropes in mines. In Proceedings of the Institute of Mining and Metallurgy Conference (Paper No. 13), Leamington Spa, UK.
   Google Scholar
• Medhurst, G., Grobler, S., & Connolly, G. (2010). Influence of high airflow on balance rope behaviour. In Proceedings of the International Conference on Hoisting and Haulage (pp. 161–174). Society for Mining, Metallurgy and Exploration.
   Google Scholar
• National Coal Board of the UK. (1980). Ropeman’s handbook (3rd ed.). Author.
   Google Scholar
• New South Wales Department of Mineral Resources. (2001). Summary of mine winder and shaft incidents in NSW coal mines: 1995–2001 ( Report No. MGG3004 S/R 01/3).
   Google Scholar
• South African Bureau of Standards. (1996). SANS 10293: Code of practice: Condition assessment of steel wire ropes on mine winders. Author.
   Google Scholar
• South African Bureau of Standards. (2000). SANS 10294: Code of practice: The performance, operation, testing and maintenance of drum winders relating to rope safety. Author.
   Google Scholar
• Standards Australia. (2003). AS 4812: Non-destructive examination and discard criteria for wire ropes in mine winding systems. Author.
   Google Scholar
• Standards Australia. (2022). AS 3637: Underground mining – winding suspension equipment. Author.
   Google Scholar
• TAS. (1977). Technical standards for shafts and inclined haulages (TAS). Department of Mining and Energy in North-Rhine.
   Google Scholar
• Thyssen Draht AG. (1987). Thyssen “big T” wire ropes for underground mining construction tables. Author.
   Google Scholar
• Timiney, P., Ashmore, P. S., & Manka, J. M. (1993). Developments in shaped wire for locked coil hoist ropes. Conference Papers, Mine Hoisting 93 (pp. 6.3.1–6.3.7). The Institution of Mining Electrical & Mining Mechanical Engineers.
   Google Scholar
• Van der Elst, W. J. (1961). Dynamic scale model testing of rope guide installations for mine shafts. The South African Mechanical Engineer, 60(11), 132–155.
   Google Scholar
• Van der Elst, W. J. (1965). The use of scale models for investigating the dynamic behaviour of rope-guide mine shaft installations [ Doctoral dissertation, University of Pretoria].
   Google Scholar
• Van der Lingen, T. W. (1961). Dynamic behaviour of rope-guided conveyances with reference to scale model testing. The South African Mechanical Engineer, 60(12), 163–185.
   Google Scholar