C.E. Credit. Effect of Steam Sterilization on Accuracy of 3D Printed Implant Surgical Guides: A Pilot Study

References

• Elani H, Starr J, Da Silva J, Gallucci G. Trends in dental implant use in the U.S., 1999 –2016, and projections to 2026. J Dent Res. 2018;97(13):1424–6. doi:10.1177/0022034518792567.
   PubMed Web of Science ®Google Scholar
• Zhou W, Zhonghao L, Liansheng S, Chia-Ling K, Shafer D. Clinical factors affecting the accuracy of guided implant surgery— a systematic review and meta-analysis. J Evidence-Based Dent Pract. 2018;18(1):[28-40] 1532–3382. doi:10.1016/j.jebdp.2017.07.007.
   Web of Science ®Google Scholar
• Scherer M. Presurgical implant-site assessment and restoratively driven digital planning. Dent Clin N Am. 2014;58(3):561–595. doi:10.1016/j.cden.2014.04.002.
   PubMedGoogle Scholar
• Deeb GR, Allen R, Hall P, Whitley D, Laskin DM, Bencharit S . How accurate are implant surgical guides produced with desktop stereolithographic 3D-printers? J Oral Maxillofac Surg. 2017;75(12).
   Web of Science ®Google Scholar
• Smitkarn P, Subbalekha K, Mattheos N, Pimkhaokham A. The accuracy of single‐tooth implants placed using fully digital‐guided surgery and freehand implant surgery. J Clin Periodontol. 2019;46(9):949–957. doi:10.1111/jcpe.13160.
   PubMed Web of Science ®Google Scholar
• Vercruyssen M, Laleman I, Jacobs R, Quirynen M. Computer-supported implant planning and guided surgery: a narrative review. Clin Oral Impl Res. 2015;26(Suppl. 11):69–76. doi:10.1111/clr.12638.
   PubMedGoogle Scholar
• Chen C, Yuh D, Huang R, Fu E, Tsai C, Chiang C. Accuracy of implant placement with a navigation system, a laboratory guide, and freehand drilling. Int J Oral Maxillofac Implants. 2018;33(6):1213–1218. doi:10.11607/jomi.6585.
   PubMed Web of Science ®Google Scholar
• Gargallo-Albiol J, Barootchi S, Marqué-Guasch J, Wang H. Fully guided versus half-guided and freehand implant placement: systematic review and meta-analysis. Int J Oral Maxillofac Implants. 2020;35(6):1159–1169. doi:10.11607/jomi.7942.
   PubMed Web of Science ®Google Scholar
• Vermuelen J. The accuracy of implant placement by experienced surgeons: guided vs freehand approach in a simulated plastic model. Int J Oral Maxillofac Implants. 2017;32(3):617–624. doi:10.11607/jomi.5065.
   PubMed Web of Science ®Google Scholar
• Jang HJ, Yoon JU, Joo JY, Lee JY, Kim HJ. Effects of a simplified drilling protocol at 50 rpm on heat generation under water-free conditions: an in vitro study. J Periodontal Implant Sci. 2023;53(1):85–95. doi:10.5051/jpis.2201400070.
   PubMed Web of Science ®Google Scholar
• Mora M, Chenin D, Arce R. Software tools and surgical guides in dental implant-guided surgery. Dent Clin N Am. 2014;58(3):597–626. doi:10.1016/j.cden.2014.04.001.
   PubMedGoogle Scholar
• Tallarico M, Lumbau AI, Park C, et al. In vitro evaluation of bioburden, three‐dimensional stability, and accuracy of surgical templates without metallic sleeves after routinely infection control activities. Clin Implant Dent Rel Res. 2021;23(3):380–387. doi:10.1111/cid.12986.
   PubMed Web of Science ®Google Scholar
• Medical Device Coordination Group. MDCG 2021-24 – guidance on classification of medical devices. Medical Device. October, 2021.
   Google Scholar
• Kirschner A, David S, Brunello G, et al. Impact of steam autoclaving on the mechanical properties of 3D-printed resins used for insertion guides in orthodontics and implant dentistry. Appl Sci. 2022;12(12):6195. doi:10.3390/app12126195.
   Google Scholar
• Pop SI, Dudescu M, Mihali SG, Păcurar M, Bratu DC. Effects of disinfection and steam sterilization on the mechanical properties of 3D SLA- and DLP-printed surgical guides for orthodontic implant placement. Polymers. 2022;14(10):2107. doi:10.3390/polym14102107.
   PubMed Web of Science ®Google Scholar
• Tachmatzidis T, Kapagiannidis I, Dabarakis N. Evaluation of volumetric changes of 3D printed implant surgical guides after sterilization process. Clin Oral Implants Res. 2020;31(S20):99–99. doi:10.1111/clr.40_13644.
   Google Scholar
• Sharma N, Cao N, Msallem B, et al. Effects of steam sterilization on 3D printed biocompatible resin materials for surgical guides—an accuracy assessment study. J Clin Med. 2020;9(5):1506. doi:10.3390/jcm9051506.
   PubMed Web of Science ®Google Scholar
• De Matheus D, Gomes E, Barcellos D, Rosetti E, Margonar R. Linear dimensional accuracy of stereolithographic surgical guide after chemistry and physics sterilization. J Stomatol Oral Maxillofac Surg. 2022;123(5):510–513. doi:10.1016/j.jormas.2021.11.006.
   PubMed Web of Science ®Google Scholar
• Shaheen E, Alhelwani A, Van De Casteele E, Politis C, Jacobs R. Evaluation of dimensional changes of 3D printed models after sterilization: a pilot study. Open Dent J. 2018;12(1):72–79. doi:10.2174/1874210601812010072.
   PubMedGoogle Scholar
• Marei HF, Alshaia A, Alarifi S, Almasoud N, Abdelhady A. Effect of steam heat sterilization on the accuracy of 3D printed surgical guides. Implant Dent. 2019;28(4):372–377. doi:10.1097/ID.0000000000000908.
   PubMed Web of Science ®Google Scholar
• Török G, Gombocz P, Bognár E, et al. Effects of disinfection and sterilization on the dimensional changes and mechanical properties of 3D printed surgical guides for implant therapy – pilot study. BMC Oral Health. 2020;20(1):19. doi:10.1186/s12903-020-1005-0.
   PubMed Web of Science ®Google Scholar
• Rungcharassaeng K, Caruso JM, Kan JYK, Schutyser F, Boumans T. Accuracy of computer-guided surgery: a comparison of operator experience. J Prosthet Dent. 2015;114(3):407–413. doi:10.1016/j.prosdent.2015.04.004.
   PubMed Web of Science ®Google Scholar
• Johansson K, Jimbo R, Östlund P, Tranæus S, Becktor J. Effects of bacterial contamination on dental implants during surgery: a systematic review. Implant Dent. 2017;26(5):778–789. doi:10.1097/ID.0000000000000660.
   PubMed Web of Science ®Google Scholar
• Nobel Biocare. NobelReplace® and Replace Select^TM Tapered - Procedures Manual. Kloten, Switzerland: Nobel Biocare Manuals; 2013.
   Google Scholar
• El Kholy K, Lazarin R, Janner SFM, Faerber K, Buser R, Buser D. Influence of surgical guide support and implant site location on accuracy of static computer‐assisted implant surgery. Clin Oral Implants Res. 2019;30(11):1067–1075. doi:10.1111/clr.13520.
   PubMed Web of Science ®Google Scholar
• Sprintray. Dental application guide: 3D printing surgical guides. Los Angeles, CA: Sprintray.
   Google Scholar
• Formlabs. Instructions for Use - Surgical Guide Resin. Somerville, MA: Formlabs; 2019.
   Google Scholar