Design and optimization of bionic Nautilus volute for a hydrodynamic retarder

References

• Acarer, S., Uyulan, Ç, & Karadeniz, Z. H. (2020). Optimization of radial inflow wind turbines for urban wind energy harvesting. Energy, 202, 117772. https://doi.org/10.1016/j.energy.2020.117772
   PubMed Web of Science ®Google Scholar
• Ale Martos, P., Barrera-Medrano, M. E., Martinez-Botas, R., Tomita, I., Kanzaka, T., & Ibaraki, S. (2021, June). Flow field analysis and optimized design of a centrifugal compressor volute. ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition. https://doi.org/10.1115/GT2021-59879.
   Google Scholar
• Arani, H. A., Fathi, M., Raisee, M., & Nourbakhsh, S. A. (2019, March). A novel volute design for reducing radial force in pump and PAT. In IOP Conference Series: Earth and Environmental Science, 240(4), p. 042004. http://doi.org/10.1088/1755-1315/240/4/042004.
   Google Scholar
• Ayder, E., Van den Braembussche, R., & Brasz, J. J. (1993). Experimental and theoretical analysis of the flow in a centrifugal compressor volute. Journal of Turbomachinery, 115(3), 582–589. https://doi.org/10.1115/1.2929293
   Web of Science ®Google Scholar
• Bian, C., Zhang, S., Yang, J., Liu, H., Zhao, F., & Wang, X. (2021). Bayesian optimization design of inlet volute for supercritical carbon dioxide radial-flow turbine. Machines, 9(10), 218. https://doi.org/10.3390/machines9100218
   Web of Science ®Google Scholar
• Bu, W., Shen, G., Qiu, H., & Liu, C. (2018). Investigation on the dynamic influence of thermophysical properties of transmission medium on the internal flow field for hydraulic retarder. International Journal of Heat and Mass Transfer, 126, 1367–1376. https://doi.org/10.1016/j.ijheatmasstransfer.2018.05.037
   Web of Science ®Google Scholar
• Chen, H. (1996). Design methods of volute casings for turbocharger turbine applications. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 210(2), 149–156. https://doi.org/10.1243/PIME_PROC_1996_210_022_02
   Google Scholar
• Chen, X., Wei, W., Mu, H., Liu, X., Wang, Z., & Yan, Q. (2022). Numerical investigation and experimental verification of the fluid cooling process of typical stator–rotor machinery with a plate-type heat exchanger. Machines, 10(10), 887. https://doi.org/10.3390/machines10100887
   Web of Science ®Google Scholar
• Chunbao, L., Linshan, G., Wenxing, M., & Xuesong, L. (2015). Multiobjective optimization design of double-row blades hydraulic retarder with surrogate model. Advances in Mechanical Engineering, 7(2), 508185. https://doi.org/10.1155/2014/508185
   Web of Science ®Google Scholar
• Dai, C., Guo, C., Chen, Y., Dong, L., & Liu, H. (2021). Analysis of the influence of different bionic structures on the noise reduction performance of the centrifugal pump. Sensors, 21(3), 886. https://doi.org/10.3390/s21030886
   PubMed Web of Science ®Google Scholar
• Deb, K., Pratap, A., Agarwal, S., & Meyarivan, T. A. M. T. (2002). A fast and elitist multiobjective genetic algorithm: NSGA-II. IEEE Transactions on Evolutionary Computation, 6(2), 182–197. https://doi.org/10.1109/4235.996017
   Web of Science ®Google Scholar
• Dong, J., Qin, W., Li, Y., Li, Q., & Deng, L. (2018). Fast multi-objective antenna design based on improved back propagation neural network surrogate model. Journal of Electronics & Information Technology, 40(11), 2712–2719.
   Web of Science ®Google Scholar
• Dong, X., & Dou, H. S. (2021). Effects of bionic volute tongue bioinspired by leading edge of owl wing and its installation angle on performance of multi-blade centrifugal fan. Journal of Applied Fluid Mechanics, 14(4), 1031–1043.
   Web of Science ®Google Scholar
• Du, X., Yu, D., Luo, D., & Huang, D. (2019). Supercritical carbon dioxide centripetal compressor—aerodynamic design and analysis of off design conditions. Journal of Nuclear Engineering and Radiation Science, 5(4), 1–11. https://doi.org/10.1115/1.4043846
   Web of Science ®Google Scholar
• Elholm, T., Ayder, E., & Van den Braembussche, R. (1992). Experimental study of the swirling flow in the volute of a centrifugal pump. Journal of Turbomachinery, 114(2), 366–372. https://doi.org/10.1115/1.2929153
   Web of Science ®Google Scholar
• Gan, X., Pavesi, G., Pei, J., Yuan, S., Wang, W., & Yin, T. (2022). Parametric investigation and energy efficiency optimization of the curved inlet pipe with induced vane of an inline pump. Energy, 240, 122824. https://doi.org/10.1016/j.energy.2021.122824
   Web of Science ®Google Scholar
• Gao, M., Li, Z., Cheng, L., & Zhang, W. (2020, September). Aerodynamic performance and wake effect of new type nautilus blade vertical axis wind turbine. 2020 5th International Conference on Power and Renewable Energy (ICPRE). https://doi.org/10.1109/ICPRE51194.2020.9233224.
   Google Scholar
• Gu, Y. Q., Shi, Z. Z., Mou, J. G., Wang, H. S., & Zhou, P. J. (2016). Non-Smooth surface flow drag reduction characteristics of centrifugal pump impeller. International Journal of Engineering Research in Africa, 24, 44–56. https://doi.org/10.4028/www.scientific.net/JERA.24.44
   Google Scholar
• Gu, Y. Q., Zhang, W. Q., Mou, J. G., Zheng, S. H., Zhou, P. J., & Fan, T. X. (2018). Effect of bionic mantis shrimp groove volute on vortex pump pressure pulsation. Journal of Central South University, 25(10), 2399–2409. https://doi.org/10.1007/s11771-018-3924-3
   Web of Science ®Google Scholar
• Heinrich, M., & Schwarze, R. (2016). Genetic algorithm optimization of the volute shape of a centrifugal compressor. International Journal of Rotating Machinery, 2016, 1–13. https://doi.org/10.1155/2016/4849025.
   Google Scholar
• Huang, J., Xu, S., Liu, H., & Wang, X. (2015, June). Robust performance optimization of centrifugal compressor volute with a rectangular cross-section. ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. https://doi.org/10.1115/GT2015-42979.
   Google Scholar
• Huang, J. Y., Zhang, K., Li, H. Y., Wang, A. R., & Yang, M. (2021). Numerical simulation of aerodynamic noise and noise reduction of range hood. Applied Acoustics, 175, 107806. https://doi.org/10.1016/j.apacoust.2020.107806
   Web of Science ®Google Scholar
• Ji, L., Li, W., Shi, W., Chang, H., & Yang, Z. (2020). Energy characteristics of mixed-flow pump under different tip clearances based on entropy production analysis. Energy, 199, 117447. https://doi.org/10.1016/j.energy.2020.117447
   Web of Science ®Google Scholar
• Kock, F., & Herwig, H. (2004). Local entropy production in turbulent shear flows: A high-reynolds number model with wall functions. International Journal of Heat and Mass Transfer, 47(10-11), 2205–2215. https://doi.org/10.1016/j.ijheatmasstransfer.2003.11.025
   Web of Science ®Google Scholar
• Kock, F., & Herwig, H. (2005). Entropy production calculation for turbulent shear flows and their implementation in CFD codes. International Journal of Heat and Fluid Flow, 26(4), 672–680. https://doi.org/10.1016/j.ijheatfluidflow.2005.03.005
   Web of Science ®Google Scholar
• Kong, L., Wei, W., Mu, H., & Yan, Q. (2020). Research on partially filled characteristics of vehicular hydrodynamic retarders. International Journal of Heavy Vehicle Systems, 27(6), 817–839. https://doi.org/10.1504/IJHVS.2020.112973
   Web of Science ®Google Scholar
• Le Gigan, G., Vernersson, T., Lundén, R., & Skoglund, P. (2015). Disc brakes for heavy vehicles: An experimental study of temperatures and cracks. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 229(6), 684–707. https://doi.org/10.1177/0954407014550843
   Web of Science ®Google Scholar
• Le Hocine, A. E. B., Poncet, S., & Fellouah, H. (2021). CFD modeling and optimization by metamodels of a squirrel cage fan using OpenFoam and Dakota: Ventilation applications. Building and Environment, 205, 108145. https://doi.org/10.1016/j.buildenv.2021.108145
   Web of Science ®Google Scholar
• Li, B., Li, X., Jia, X., Chen, F., & Fang, H. (2019). The role of blade sinusoidal tubercle trailing edge in a centrifugal pump with low specific speed. Processes, 7(9), 625. https://doi.org/10.3390/pr7090625
   Web of Science ®Google Scholar
• Li, N., Wang, W., Xu, R., Zhang, J., & Xu, H. (2023). Design of a novel nautilus bionic flow field for proton exchange membrane fuel cell by analyzing performance. International Journal of Heat and Mass Transfer, 200, 123517. https://doi.org/10.1016/j.ijheatmasstransfer.2022.123517
   Web of Science ®Google Scholar
• Li, Z., Gao, M., Cao, X., Cheng, L., Wang, X., An, G., & Sun, H. (2022). Structural optimal design and power generation characteristics of a bionic type nautilus vertical axis wind turbine. The Journal of Engineering, 2022(1), 64–75. https://doi.org/10.1049/tje2.12095
   Google Scholar
• Liang, S. M., Ji, H. M., & Li, X. W. (2021). A high-strength and high-toughness nacreous structure in a deep-sea nautilus shell: Critical role of platelet geometry and organic matrix. Journal of Materials Science & Technology, 88, 189–202. https://doi.org/10.1016/j.jmst.2021.01.082
   Web of Science ®Google Scholar
• Lv, H., Yang, W., & Zhang, W. J. (2022). Numerical simulation and analysis of the aerodynamic noise of a nautilus-inspired bionic multiblade centrifugal fan. Journal of Mechanical Science and Technology, 36(9), 4475–4489. https://doi.org/10.1007/s12206-022-0812-4
   Web of Science ®Google Scholar
• Ma, L., Gu, Y., Xia, K., Mou, C., Mou, J., Wu, D., & Yan, M. (2022). Influence of bionic circular groove blade surface on wear performance. Lubricants, 10(5), 101. https://doi.org/10.3390/lubricants10050101
   Web of Science ®Google Scholar
• MacQuitty, M. (2008). Ocean. Dorling Kindersley Ltd.
   Google Scholar
• Mu, H., Wei, W., Kong, L., Zhao, Y., & Yan, Q. (2019). Braking characteristics integrating open working chamber model and hydraulic control system model in a hydrodynamic retarder. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 233(6), 1952–1971. https://doi.org/10.1177/0954406218780510
   Web of Science ®Google Scholar
• Mu, H., Wei, W., Untaroiu, A., & Yan, Q. (2016). Study on reconstruction and prediction methods of pressure field on blade surfaces for oil-filling process in a hydrodynamic retarder. International Journal of Numerical Methods for Heat & Fluid Flow, 26(6), 1843–1870. https://doi.org/10.1108/HFF-05-2015-0166
   Web of Science ®Google Scholar
• Mu, H., Yan, Q., & Wei, W. (2017). Study on influence of inlet and outlet flow rates on oil pressures and braking torque in a hydrodynamic retarder. International Journal of Numerical Methods for Heat & Fluid Flow, 27(11), 2544–2564. https://doi.org/10.1108/HFF-10-2016-0428
   Web of Science ®Google Scholar
• Owarish, H. O., Ilyas, M., & Bhinder, F. S. (1992). A two-dimensional flow analysis model for designing a nozzle-less volute casing for radial flow gas turbines. Journal of Turbomachinery, 144(2), 402–410. https://doi.org/10.1115/1.2929158.
   Google Scholar
• Selvaraj, T., Hariharasakthisudhan, P., Pandiaraj, S., Sathickbasha, K., & Aslam, N. M. A. (2020). Optimizing the design parameters of radial tip centrifugal blower for dust test chamber application through numerical and statistical analysis. FME Transactions, 48(1), 236–245. https://doi.org/10.5937/fmet2001236S
   Web of Science ®Google Scholar
• Serani, A., Diez, M., & Quagliarella, D. (2023). Efficient shape optimization via parametric model embedding. In AIAA SCITECH 2023 Forum (p. 1273).
   Google Scholar
• Shim, H. S., Afzal, A., Kim, K. Y., & Jeong, H. S. (2016). Three-objective optimization of a centrifugal pump with double volute to minimize radial thrust at off-design conditions. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 230(6), 598–615. https://doi.org/10.1177/0957650916656544
   Web of Science ®Google Scholar
• Simpson, A. T., Spence, S. W. T., & Watterson, J. K. (2009). A comparison of the flow structures and losses within vaned and vaneless stators for radial turbines. Journal of Turbomachinery, 131(3), 1–15. https://doi.org/10.1115/1.2988493
   Web of Science ®Google Scholar
• Tao, T., Ke, Z., Wei, W., Liu, C., & Yan, Q. (2022, June). Optimal blade design of stator based on adjoint fluid topology optimization method in a torque converter. ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition. https://doi.org/10.1115/GT2022-83005.
   Google Scholar
• Tinello, D., Jodin, D., & Winkler, H. (2016). Biomimetics applied to factory layout planning: Fibonacci based patterns, spider webs and nautilus shell as bio-inspiration to reduce internal transport costs in factories. CIRP Journal of Manufacturing Science and Technology, 13, 51–71. https://doi.org/10.1016/j.cirpj.2016.02.003
   Web of Science ®Google Scholar
• Wang, J., Ma, W., Liu, C., Fu, H., Ma, L., & Chen, J. (2022). Numerical simulation and experimental study of gas–liquid two-phase flow pattern of hydrodynamic retarder. AIP Advances, 12(10), 1–11. https://doi.org/10.1063/5.0095740
   Web of Science ®Google Scholar
• Wang, K., Ju, Y., & Zhang, C. (2019). A quantitative evaluation method for impeller-volute tongue interaction and application to squirrel cage fan with bionic volute tongue. Journal of Fluids Engineering, 141(8), 1–13. https://doi.org/10.1115/1.4042372
   Web of Science ®Google Scholar
• Wang, K., Ju, Y., & Zhang, C. (2021). Aerodynamic optimization of forward-curved blade centrifugal fan characterized by inclining bionic volute tongue. Structural and Multidisciplinary Optimization, 63(5), 2493–2507. https://doi.org/10.1007/s00158-020-02801-2
   Web of Science ®Google Scholar
• Wang, Z., Wei, W., Chen, X., Langari, R., & Yan, Q. (2023). Comprehensive evaluation of hydrodynamic retarders with fuzzy analytic hierarchy process and improved radar chart. Machines, 11(9), 849. https://doi.org/10.3390/machines11090849
   Web of Science ®Google Scholar
• Wei, W., Kuang, N., Kong, L., Zhang, X., & Yan, Q. (2020). Brake hysteresis effect of charging valves in hydrodynamic retarder. Chinese Journal of Mechanical Engineering, 55(20), 222–230.
   Google Scholar
• Wu, L., Liu, X., & Wang, M. (2020). Effects of bionic volute tongue on aerodynamic performance and noise characteristics of centrifugal Fan used in the Air-conditioner. Journal of Bionic Engineering, 17(4), 780–792. https://doi.org/10.1007/s42235-020-0067-7
   Web of Science ®Google Scholar
• Wu, N., Zhang, K. S., Wang, X. B., & Ma, Y. H. (2018). Bionic design of turbocharger volute based on spiral shells neverita didyma improving turbine performance. Transactions of the Chinese Society of Agricultural Engineering, 34(19), 60–65. https://doi.org/10.11975/j.issn.1002-6819.2018.19.008
   Google Scholar
• Yang, Y., Zhou, L., Hang, J., Du, D., Shi, W., & He, Z. (2021). Energy characteristics and optimal design of diffuser meridian in an electrical submersible pump. Renewable Energy, 167, 718–727. https://doi.org/10.1016/j.renene.2020.11.143
   Web of Science ®Google Scholar
• Yu, Y., Ren, W., & Liu, J. (2019). A new volute design method for the turbo air classifier. Powder Technology, 348, 65–69. https://doi.org/10.1016/j.powtec.2019.03.015
   Web of Science ®Google Scholar
• Yun, L., Rongsheng, Z., Dezhong, W., Junlian, Y., & Tianbin, L. (2016). Numerical and experimental investigation on the diffuser optimization of a reactor coolant pump with orthogonal test approach. Journal of Mechanical Science and Technology, 30(11), 4941–4948. https://doi.org/10.1007/s12206-016-1014-8
   Web of Science ®Google Scholar
• Zhang, X.-Y., Jiang, C.-X., Lv, S., Wang, X., Yu, T., Jian, J., Shuai, Z.-J., & Li, W.-Y. (2021). Clocking effect of outlet RGVs on hydrodynamic characteristics in a centrifugal pump with an inlet inducer by CFD method. Engineering Applications of Computational Fluid Mechanics, 15(1), 222–235. https://doi.org/10.1080/19942060.2021.1871961
   Web of Science ®Google Scholar
• Zhao, J., Pei, J., Yuan, J., & Wang, W. (2022). Energy-saving oriented optimization design of the impeller and volute of a multistage double-suction centrifugal pump using artificial neural network. Engineering Applications of Computational Fluid Mechanics, 16(1), 1974–2001. https://doi.org/10.1080/19942060.2022.2127913
   Web of Science ®Google Scholar
• Zheng, H., Lei, Y., & Song, P. (2016). Design of a filling ratio observer for a hydraulic retarder: An analysis of vehicle thermal management and dynamic braking system. Advances in Mechanical Engineering, 8(10), 1687814016674098. https://doi.org/10.1177/1687814016674098
   Web of Science ®Google Scholar
• Zhou, L., Hang, J., Bai, L., Krzemianows-ki, Z., El-Emam, M. A., Yasser, E., & Agarwal, R. (2022). Application of entropy production theory for energy losses and other investigation in pumps and turbines: A review. Applied Energy, 318, 119211. https://doi.org/10.1016/j.apenergy.2022.119211
   Web of Science ®Google Scholar