Measuring the quality and impact of 3D medical printing in surgical planning, procedures and communications using product usefulness surveys

References

• Anderson, Jeff R., Walker L. Thompson, Abdulaziz K. Alkattan, Orlando Diaz, Richard Klucznik, Yi. J. Zhang, Gavin W. Britz, et al. 2015. “Three-Dimensional Printing of Anatomically Accurate, Patient Specific Intracranial Aneurysm Models [e-Pub Ahead of Print].” Journal of Neurointerventional Surgery 8 (5): 517–520. https://doi.org/10.1136/neurintsurg-2015-011686.
   PubMed Web of Science ®Google Scholar
• Bhutkar, G., A. Konkani, D. Katre, and G. G. Ray. 2013. “A Review: Healthcare Usability Evaluation Methods.” Biomedical Instrumentation & Technology Suppl (s2): 45–53. https://doi.org/10.2345/0899-8205-47.s2.45.
   PubMedGoogle Scholar
• Bogdanova, R., P. Boulanger, and B. Zheng. 2015. “Three-Dimensional Eye Tracking in a Surgical Scenario.” Surgical Innovation 22 (5): 522–527. https://doi.org/10.1177/1553350615573581.
   PubMed Web of Science ®Google Scholar
• Cacciamani, Giovanni E., Zhamshid Okhunov, Aurus Dourado Meneses, Moises Elias Rodriguez-Socarras, Juan Gomez Rivas, Francesco Porpiglia, Evangelos Liatsikos, et al. 2019. “Impact of Three-Dimensional Printing in Urology: State of the Art and Future Perspectives. A Systematic Review by ESUT-YAUWP Group.” European Urology 76 (2): 209–221. https://doi.org/10.1016/j.eururo.2019.04.044.
   PubMed Web of Science ®Google Scholar
• Dedhayir, D., R. J. Ortt, C. Riverola, and F. Miralles. 2017. “Innovators and Early Adopters in the Diffusion of Innovations: A Literature Review.” Special Issue on 18th Special Issue for the ISP IM; (Editors: Tidd J., Huizingh E., and Conn, S.) International Journal of Innovation Management 21 (8), 1740010. https://doi.org/10.1142/S1363919617400102
   Google Scholar
• D’Urso, P. S, et al. 1999. “Stereolithographic Biomodelling in Cranio-Maxillofacial Surgery: A Prospective Trial.” Journal of Cranio-Maxillofacial Surgery 27 (1): 30–37. https://doi.org/10.1016/S1010-5182(99)80007-9.
   PubMed Web of Science ®Google Scholar
• Díaz-Oreiro, I., López, G., Quesada, L., & Guerrero, L. A. (2019). Standardized Questionnaires for User Experience Evaluation: A Systematic Literature Review. Proceedings 2019 31(1), 14. https://doi.org/10.3390/PROCEEDINGS2019031014.
   Google Scholar
• Dunsch, F., D. K. Evans, M. Macis, and Q. Wang. 2018. “Bias in Patient Satisfaction Surveys: A Threat to Measuring Healthcare Quality.” BMJ Global Health 3 (2): e000694. https://doi.org/10.1136/bmjgh-2017-000694.
   PubMed Web of Science ®Google Scholar
• Eley, K. A. 2017. “Centralised 3D Printing in the NHS: A Radiological Review.” Clinical Radiology 72 (4): 269–275. https://doi.org/10.1016/j.crad.2016.12.013.
   PubMed Web of Science ®Google Scholar
• Farooqi, K. M., and F. Mahmood. 2018. “Innovations in Preoperative Planning: Insights into Another Dimension Using 3D Printing for Cardiac Disease.” Journal of Cardiothoracic and Vascular Anesthesia 32 (4): 1937–1945. https://doi.org/10.1053/j.jvca.2017.11.037.
   PubMed Web of Science ®Google Scholar
• FBI. 2023. 3D Printing Market Size, Share & COVID-19 Impact Analysis, By Component (Hardware, Software, Services), By Technology (FDM, SLS, SLA, DMLS/SLM, Polyjet, Multi Jet Fusion, DLP, Binder Jetting, EBM, CLIP/CDLP, SDL, LOM), By Application (Prototyping, Production, Proof of Concept, Others), By End User (Automotive, Aerospace, and Defense, Healthcare, Architecture and Construction, Consumer Products, Education, Others), and Regional Forecast, 2023-2030. Fortune Business Insight, Report ID: FBI101902
   Google Scholar
• Garg, B., and N. Mehta. 2018. “Current Status of 3D Printing in Spine Surgery.” Journal of Clinical Orthopaedics and Trauma 9 (3): 218–225. https://doi.org/10.1016/j.jcot.2018.08.006.
   PubMedGoogle Scholar
• Gokhare, V. G., DrDN Raut, and DrDK Shinde. 2017. “A Review Paper on 3D-Printing Aspects and Various Processes Used in the 3D-Printing.” International Journal of Engineering Research & Technology 6 (6): 953–958. https://doi.org/10.17577/IJERTV6IS060409.
   Google Scholar
• Haleem, A., M. Javaid, and A. Saxena. 2018. “Additive Manufacturing Applications in Cardiology: A Review.” The Egyptian Heart Journal: (EHJ): Official Bulletin of the Egyptian Society of Cardiology 70 (4): 433–441. https://doi.org/10.1016/j.ehj.2018.09.008.
   PubMedGoogle Scholar
• Harpur, A., N. Haslam S. Fu Wu, E. Morales Cantana, T. Cooke, L. Donnelly, J. Magee and Wilson, S. 2018. axial3d Insight. Software, axial3D. https://pure.ulster.ac.uk/en/publications/axial3d-insight
   Google Scholar
• Hinderks, A., D. Winter, M. Schrepp, and J. Thomaschewski. 2020. “Applicability of User Experience and Usability Questionnaires.” Journal of Universal Computer Science: 25 (13): 1717–1735. https://www.researchgate.net/publication/338750029_Applicability_of_User_Experience_and_Usability_Questionnaires.
   Web of Science ®Google Scholar
• IRMER: The Ionising Radiation (Medical Exposure) Regulations. 2017. Available at: https://www.legislation.gov.uk/uksi/2017/1322/made accessed 15 May 2020
   Google Scholar
• Javaid, M., and A. Haleem. 2018a. “Additive Manufacturing Applications in Medical Cases: A Literature Based Review.” Alexandria Journal of Medicine 54 (4): 411–422. https://doi.org/10.1016/j.ajme.2017.09.003.
   Web of Science ®Google Scholar
• Javaid, M., and A. Haleem. 2018b. “Additive Manufacturing Applications in Orthopaedics: A Review.” Journal of Clinical Orthopaedics and Trauma 9 (3): 202–206. https://doi.org/10.1016/j.jcot.2018.04.008.
   PubMedGoogle Scholar
• Kaye, R., T. Goldstein, D. Zeltsman, D. A. Grande, and L. P. Smith. 2016. “Three Dimensional Printing: A Review on the Utility within Medicine and Otolaryngology.” International Journal of Pediatric Otorhinolaryngology 89: 145–148. https://doi.org/10.1016/j.ijporl.2016.08.007.
   PubMed Web of Science ®Google Scholar
• Kodama, H. 1981. “Automatic Method for Fabricating a Three-Dimensional Plastic Model with Photo-Hardening Polymer.” Review of Scientific Instruments 52 (11): 1770–1773. https://doi.org/10.1063/1.1136492.
   Web of Science ®Google Scholar
• Lal, H., and M. K. Patralekh. 2018. “3D Printing and Its Applications in Orthopaedic Trauma: A Technological Marvel.” Journal of Clinical Orthopaedics and Trauma 9 (3): 260–268. https://doi.org/10.1016/j.jcot.2018.07.022.
   PubMedGoogle Scholar
• Liang, R., T. Dornan, and D. Nestel. 2019. “Why Do Women Leave Surgical Training? A Qualitative and Feminist Study.” Lancet (London, England) 393 (10171): 541–549. www.Thelancet.Com. https://doi.org/10.1016/S0140-6736(18)32612-6.
   PubMed Web of Science ®Google Scholar
• Liljegren, E. 2006. “Usability in a Medical Technology Context Assessment of Methods for Usability Evaluation of Medical Equipment.” International Journal of Industrial Ergonomics 36 (4): 345–352. https://doi.org/10.1016/j.ergon.2005.10.004.
   Web of Science ®Google Scholar
• Lin, Guang-Xun, Chien-Min Chen, Gang Rui, and Bao-Shan Hu. 2023. “Research Relating to Three-Dimensional (3D) Printing in Spine Surgery: A Bibliometric Analysis.” European Spine Journal: official Publication of the European Spine Society, the European Spinal Deformity Society, and the European Section of the Cervical Spine Research Society 32 (2): 395–407. https://doi.org/10.1007/s00586-022-07376-8.
   PubMed Web of Science ®Google Scholar
• Lin, H.-H., D. Lonic, and L. J. Lo. 2018. “3D Printing in Orthognathic Surgery − A Literature Review.” Journal of the Formosan Medical Association = Taiwan yi Zhi 117 (7): 547–558. https://doi.org/10.1016/j.jfma.2018.01.008.
   PubMed Web of Science ®Google Scholar
• Marro, A., T. Bandukwala, and T. Mak. 2016. “Three-Dimensional Printing and Medical Imaging: A Review of the Methods and Applications.” Current Problems in Diagnostic Radiology 45 (1): 2–9. https://doi.org/10.1067/j.cpradiol.2015.07.009.
   PubMedGoogle Scholar
• Mummolo, J., and E. Peterson. 2019. “Demand Effects in Survey Experiments: An Empirical Assessment.” American Political Science Review 113 (2): 517–529. Available at: . https://doi.org/10.1017/S0003055418000837.
   Web of Science ®Google Scholar
• Nagarajan, N., A. Dupret-Bories, E. Karabulut, P. Zorlutuna, and N. Engin Vrana. 2018. “Enabling Personalized Implant and Controllable Biosystem Development through 3D Printing.” Biotechnology Advances 36 (2): 521–533. https://doi.org/10.1016/j.biotechadv.2018.02.004.
   PubMed Web of Science ®Google Scholar
• Newman, Thomas Hedley, Matthew G. Parry, Roxanna Zakeri, Victoria Pegna, Amy Nagle, Farah Bhatti, Stella Vig, et al. 2022. “Gender Diversity in UK Surgical Specialties: A National Observational Study.” BMJ Open 12 (2)2022. e055516. https://doi.org/10.1136/bmjopen-2021-055516.
   PubMed Web of Science ®Google Scholar
• O'Connor, T., V. Papanikolaou, and I. Keogh. 2010. “Safe Surgery, the Human Factors Approach.” The Surgeon: Journal of the Royal Colleges of Surgeons of Edinburgh and Ireland 8 (2): 93–95. https://doi.org/10.1016/j.surge.2009.10.004.
   PubMed Web of Science ®Google Scholar
• Oliveira-Santos, M., E. Oliveira-Santos, L. Gonçalves, and J. S. Marques. 2019. “Cardiovascular Three-Dimensional Printing in Non-Congenital Percutaneous Interventions.” Heart, Lung & Circulation 28 (10): 1525–1534. https://doi.org/10.1016/j.hlc.2019.04.020.
   PubMed Web of Science ®Google Scholar
• Parikh, N., and P. Sharma. 2018. “Three-Dimensional Printing in Urology: History, Current Applications, and Future Directions.” Urology 121: 3–10. https://doi.org/10.1016/j.urology.2018.08.004.
   PubMed Web of Science ®Google Scholar
• Pîrjan, A., and D. Petroșanu. 2013. “The Impact of 3d Printing Technology on the Society and Economy.” Journal of Information Systems and Operations Management 7: 360–370.
   Google Scholar
• Ravi, Prashanth, Leonid Chepelev, Nathan Lawera, Khan Md Ariful Haque, Victoria C. P. Chen, Arafat Ali, and Frank J. Rybicki. 2021. “A Systematic Evaluation of Medical 3D Printing Accuracy of Multi-Pathological Anatomical Models for Surgical Planning Manufactured in Elastic and Rigid Material Using Desktop Inverted Vat Photopolymerization.” Medical Physics. 48 (6): 3223–3233. https://doi.org/10.1002/mp.14850.
   PubMed Web of Science ®Google Scholar
• Rodziewicz, T. L., and J. E. Hipskind. 2020. “Medical Error Prevention.”. In: StatPearls. Treasure Island (FL): StatPearls Publishing. [Available at: https://www.ncbi.nlm.nih.gov/books/NBK499956/. ]
   Google Scholar
• Rogers, E. M. 2003. “Diffusion of Innovations.” 4th Edition, New York: Free Press (Simon & Schuster).
   Google Scholar
• Rotaru, O. A., S. Vert, R. Vasiu, and D. Andone. 2020. “Standardised Questionnaires in Usability Evaluation. Applying Standardised Usability Questionnaires in Digital Products Evaluation.” In: Lopata, A., Butkienė, R., Gudonienė, D., Sukackė, V. (eds) Information and Software Technologies. ICIST 2020. Communications in Computer and Information Science, vol 1283. Springer, Cham. https://doi.org/10.1007/978-3-030-59506-7_4.
   Google Scholar
• RSNA. 2023. 3D Printing Data Dictionary. https://nrdrsupport.acr.org/support/solutions/articles/11000073770-3d-printing-data-dictionary?_gl=1*bhj0*_ga*NzY4NzQ0NjcxLjE2OTAxOTk4OTY.*_ga_K9XZBF7MXP*MTY5MDE5OTg5Ni4xLjEuMTY5MDE5OTg5Ni4wLjAuMA.&_ga=2.219787289.1897354916.1690199896-768744671.1690199896
   Google Scholar
• Sauro, J., and J. R. Lewis. 2012. Quantifying the User Experience. Quantifying the User Experience. Morgan Kaufmann Publishers, Elsevier, USA. https://doi.org/10.1016/C2010-0-65192-3.
   Google Scholar
• Schlegel, L., M. Ho, J. M. Fields, E. Backlund, R. Pugliese, and K. M. Shine. 2022. “Standardizing Evaluation of Patient-Specific 3D Printed Models in Surgical Planning: development of a Cross-Disciplinary Survey Tool for Physician and Trainee Feedback.” BMC Medical Education 22 (1): 614. https://doi.org/10.1186/s12909-022-03581-7.
   PubMed Web of Science ®Google Scholar
• Schrepp, M., A. Hinderks, and J. Thomaschewski. 2017. “Construction of a Benchmark for the User Experience Questionnaire (UEQ).” International Journal of Interactive Multimedia and Artificial Intelligence 4 (4): 40. https://doi.org/10.9781/ijimai.2017.445.
   Web of Science ®Google Scholar
• Schrepp, M. 2021. User Experience Questionnaires: How to use questionnaires to measure the user experience of your products? https://www.researchgate.net/publication/351308009_User_Experience_Questionnaires_How_to_use_questionnaires_to_measure_the_user_experience_of_your_products
   Google Scholar
• Serrano, C., H. van den Brink, J. Pineau, P. Prognon, and N. Martelli. 2019. “Benefits of 3D Printing Applications in Jaw Reconstruction: A Systematic Review and Meta-Analysis.” Journal of Cranio-Maxillo-Facial Surgery: official Publication of the European Association for Cranio-Maxillo-Facial Surgery 47 (9): 1387–1397. https://doi.org/10.1016/j.jcms.2019.06.008.
   PubMed Web of Science ®Google Scholar
• Shafiee, A., and A. Alta. 2016. “Printing Technologies for Medical Applications.” Trends in Molecular Medicine 22 (3): 254–265. https://doi.org/10.1016/j.molmed.2016.01.003.
   PubMed Web of Science ®Google Scholar
• Tong, Y., D. J. Kaplan, J. M. Spivak, and J. A. Bendo. 2019. “Three-Dimensional Printing in Spine Surgery: A Review of Current Applications.” The Spine Journal: Official Journal of the North American Spine Society 20 (6): 833–846. https://doi.org/10.1016/j.spinee.2019.11.004.
   PubMed Web of Science ®Google Scholar
• Vaishya, R., M. K. Patralekh, A. Vaish, A. K. Agarwal, and V. Vijay. 2018. “Publication Trends and Knowledge Mapping in 3D Printing in Orthopaedics.” Journal of Clinical Orthopaedics and Trauma 9 (3): 194–201. https://doi.org/10.1016/j.jcot.2018.07.006.
   PubMedGoogle Scholar
• Vakharia, V. N., N. N. Vakharia, and C. S. Hill. 2016. “Review of 3-Dimensional Printing on Cranial Neurosurgery Simulation Training.” World Neurosurgery 88: 188–198. https://doi.org/10.1016/j.wneu.2015.12.031.
   PubMed Web of Science ®Google Scholar
• Vukicevic, M., B. Mosadegh, Jk Min, and J. H. Little. 2017. “Cardiac 3D Printing and Its Future Directions.” JACC. Cardiovascular Imaging 10 (2): 171–184. https://doi.org/10.1016/j.jcmg.2016.12.001.
   PubMed Web of Science ®Google Scholar
• Wang, J.-Z., N.-Y. Xiong, L.-Z. Zhao, J.-T. Hu, D.-C. Kong, and J.-Y. Yuan. 2018. “Review Fantastic Medical Implications of 3D-Printing in Liver Surgeries, Liver Regeneration, Liver Transplantation and Drug Hepatotoxicity Testing: A Review.” International Journal of Surgery (London, England) 56: 1–6. https://doi.org/10.1016/j.ijsu.2018.06.004.
   PubMed Web of Science ®Google Scholar
• Yan, Q., H. Dong, J. Su, J. Han, B. Song, Q. Wei, and Y. Shi. 2018. “A Review of 3D Printing Technology for Medical Applications.” Engineering 4 (5): 729–742. https://doi.org/10.1016/j.eng.2018.07.021.
   Web of Science ®Google Scholar
• Zheng, Y.-X., D.-F. Yu, J.-G. Zhao, Y.-L. Wu, and B. Zheng. 2016. “3D Printout Models vs. 3D-Rendered Images: Which is Better for Preoperative Planning?” Journal of Surgical Education 73 (3): 518–523. https://doi.org/10.1016/j.jsurg.2016.01.003.
   PubMed Web of Science ®Google Scholar