REFERENCES
- E. O. HALL Proc. Phys. Soc., 1951, B64, 747.
- N. J. PETCH: J. Iron Steel loss., 1953, 174, 25.
- W. B. MORRISON, R. M1NTZ, and R. C. COCHRANE: Proc. Product Technology Conf. on 'Controlled processing of HSLA steels', York University, 1976, British Steel Corporation, Preprint Paper No. I.
- W. B. MORRISON: Trans. ASM, 1966, 59, 824.
- F. B. PICKERING and T. GLADMAN: in 'Metallurgical develop-ments in carbon steels', 10; 1963, London, The Iron and Steel Institute.
- T. GLADMAN, B. HOLMES, and F. B. PICKERING: J. Iron Steel Inst., 1970, 288. 172.
- J. J. IRANI, D. BURTON, J. D. JONES, and A. B. ROTHWELL: in 'Strong tough structural steels', 110; 1967, London, The Iron and Steel Institute.
- J. J. BUCHER, J. D. GROZIER, and J. F. ENRIETTO: in 'Fracture', Vol. 6, 247; 1969, New York, Academic Press.
- F. CAPELLI and A. MOLARONI: Metall. Ital., 1972,7. 317.
- B. MINTZ, W. B. MORRISON, and A. JONES: Met. Technol., 1979, 6, 252.
- R. R. PRESTON: in 'Yield, flow and fracture in polycrystais', (ed. T. N. Baker), 199; 1983, London, New York, Applied Science Publishers
- I. CODD and N. J. PETCH: Philos. Mag., 1960,5, 30.
- W. B. MORRISON and W. C. LESLIE: Metall. Trans., 1973, 4, 379.
- I. M. BERNSTEIN and B. B. RATH: Mesall. Trans., 1973, 4, 1545.
- J. HARDING: Acta Metall., 1969, 17, 949.
- J. D. CAMPBELL and J. HARDING: in 'Response of metals to high velocity deformation', 51; 1961, New York, Interscience.
- H. CONRAD and G. SCHOECK: Acta Mere., 1960, 8, 791.
- J. C. M. LI: Trans. AIME, 1963. 227, 239.
- J. D. MEAKIN and N. J. PETCH: 'The role of substructure in the mechanical behaviour of metals', ASD- TDR-63-324, US Airforce, Systems Division, 1963, 243.
- H. CONRAD: in 'Electron microscopy and strength of crystals', (ed. G. Thomas and J. Washburn), 299; 1963, New York, Interscience.
- C. CRUSARO: J. Aust. Inst. Met., 1963,8,317.
- M. J. MARCINKOWSKI and R. M. FISHER: Trans. AIME, 1965, 233, 293.
- J. C. M. LI and v. T. CHOU: Metall. Trans., 1970, I, 1145.
- J. P. HIRTH: Metall. Trans., 1972,3,3047.
- D. V. WILSON: Met. Sci. J., 1967, I, O.
- B. MINTZ, R. c. COCHRANE, and J. D. BAIRD: Scand. J. Metall.
- J. HESLOP and N. J. FETCH: Philos. Meg., 1957, 2, 649.
- B. MINTZ: Met. Technol., 1974, 1, 226.
- N. J. PETCH: Philos. Mag., 1958, 3, 1089.
- A. CRACKNELL and N. J. FETCH: Acta Metall., 1955,3, 186.
- H. J. KOUWENHOVEN: Trans. ASM, 1969, 59, 437.
- K. D. SIBLEY and N. N. BREYER: Metall. Trans., 1976, 7A, 1602.
- R. R. PRESTON: in `Strength of metals and alloys', 5th Int. Coot., Aachen, 1979, (ed. P. Haasen et al), Vol. 2, 1025; 1979, Oxford, Pergamon.
- B. MINTZ: J. Iron Steel Inst., 1973, 211, 433.
- B. MINTZ. and P. J. TURNER: Metall. Trans., 1978, 9A, 1611.
- J. H. PAPAZIAN and D. N. BESHERS: Mesa/I. Trans., 1971, 2,497.
- P. J. TURNER and I. H. PAPAZIAN: Met. Sci. J., 1973,7, 81.
- R. M. FISHER: PhD thesis, University of Cambridge, 1962.
- J. P. BAILON and J. M. DORLOT: Ada Metall., 1971, 19, 71.
- B. MINTZ: Met. Technol., 1984, 11, (2), 52.
- E. ANDERSON, D. LAW, W. KING, and J. SPREADBOROUGH: Trans. AIME, 1968, 242, 115.
- R. L. MILLER: Metall. Trans., 1972, 3, 905.
- D. McLEAN: 'Grain boundaries in metals'; 1957, London, Oxford University Press.
- B. KARLSSON, G. LINDON, and K. E. EASTERLING: Jernkontorets Ann., 1971, 155, 413.
- G. H. BISHOP and . CHALMERS: Phi/or. Meg., 1971, 24, 515.
- Y. ISHIDA, T. HASEGAWA, and F. NAGATA: J. Appl. Phys., 1969, 40, 2182.
- C. COCHRANE: Internal Report Ex. 40/1/71D, British Steel Corporation, Sheffield Laboratories, Moorgate, Nov. 1972.
- E. A. GUGGENHEIM: 'Thermodynamics', 2 edn; 1950, Amster-dam, North-Holland.
- B. MINTZ: in 'Strength of metals and alloys', 6th Int. Coot., Melbourne, 1982, (ed. R. C. Gifkins), Vol. 1, 217: 1982, Oxford, Pergamon.