ABSTRACT
The work-hardening and low thermal conductivity characteristics of SS304 had always been a challenge to machine it easily with better tool life and surface finish. The type of coolant, its temperature and surface coated inserts plays a pivotal role in machining the hard materials. A number of experiments were performed with a TiCN and tungsten carbide inserts in combination with soluble/synthetic coolant at ambient temperature and at 0oC TiCN-coated cemented carbide insert with synthetic coolant at 0°C is recommended for machining as per the results obtained through this research work. It was found that TiCN-coated inserts used for machining SS304 with synthetic coolant at 0°C provide better tool life, less tool wear, improved surface finish and low heat generation. The tool life was enhanced approximately by 75%, 20% reduction in maximum temperature generation and 50% improvement in surface finish of workpiece.
GRAPHICAL ABSTRACT
Acknowledgements
The authors thank VJTI, Mumbai and IIT Bombay for providing the infrastructural and testing assistance in completing in research work.
Disclosure statement
No potential conflict of interest was reported by the author(s).