Effect of combination of microstructure and surface treatment on shear strength of precision bonded joints

References

• Banea, M. D.; da Silva, L. F. M. Adhesively Bonded Joints in Composite Materials: An Overview. J. Proceed Institut Mech Eng. Part L: J. Mater: Design Appl. 2009, 223(1), 1–18. DOI: 10.1243/14644207JMDA219.
   PubMedGoogle Scholar
• Liu, J.; Li, X.; Xia, H.; Guo, L. Effects of Assembly Errors and Bonding Defects on the Centroid Drift of a Precision Sleeve Structure. J. Advanc. Manufact. 2021, 9(4), 509–519. DOI: 10.1007/s40436-021-00346-1.
   Web of Science ®Google Scholar
• Ashrafi, M.; Ajdari, A.; Rahbar, N.; Papadopoulos, J.; Nayeb-Hashemi, H.; Vaziri, A. Adhesively Bonded Single Lap Joints with Non-Flat Interfaces. J. Inter J. Adhes Adhesive. 2012, 32, 46–52. DOI: 10.1016/j.ijadhadh.2011.09.004.
   Web of Science ®Google Scholar
• Awaja, F.; Gilbert, M.; Kelly, G.; Fox, B.; Pigram, P. J. Adhesion of Polymers. J. Progress Polymer Sci. 2009, 34(9), 948–968. DOI: 10.1016/j.progpolymsci.2009.04.007.
   Web of Science ®Google Scholar
• Guo, L.; Liu, J.; Xia, H.; Li, X.; Zhang, X.; Yang, H. Effect of Surface Morphology Characteristic Parameters on the Shear Strength of Aluminum Bonded Joints. J. Inter. J. Solid Struct. 2022, 238, 111420. DOI: 10.1016/j.ijsolstr.2022.111420.
   Web of Science ®Google Scholar
• Lucchetta, G.; Marinello, F.; Bariani, P. F. Aluminum Sheet Surface Roughness Correlation with Adhesion in Polymer Metal Hybrid Overmolding. J. CIRP Annals. 2011, 60(1), 559–562. DOI: 10.1016/j.cirp.2011.03.073.
   Web of Science ®Google Scholar
• Xu, C.; Xu, F.; Shi, L.; Gao, J.; Tu, L.; Zuo, D. Enhancement of Substrate-Coating Adherence of Boron-Doped Diamond Electrodes by Nanosecond Laser Surface Texturing Pretreatment. J. Surface Coatings Technol. 2019, 360, 196–204. DOI: 10.1016/j.surfcoat.2018.12.098.
   Web of Science ®Google Scholar
• Garcia, R.; Prabhakar, P. Bond Interface Design for Single Lap Joints Using Polymeric Additive Manufacturing. J. Composite Struct. 2017, 176, 547–555. DOI: 10.1016/j.compstruct.2017.05.060.
   Web of Science ®Google Scholar
• Feng, Z.; Zhao, H.; Tan, C.; Zhu, B.; Xia, F.; Wang, Q.; Chen, B.; Song, X. Effect of Laser Texturing on the Surface Characteristics and Bonding Property of 30CrMnSiA Steel Adhesive Joints. J. Manufact. Process. 2019, 47, 219–228. DOI: 10.1016/j.jmapro.2019.09.046.
   Web of Science ®Google Scholar
• Zhang, C.; Chen, L.; Zhang, Y.; Wang, G.; Jin, J. Effect of Laser Processing Microstructure on the Bonding Strength and Failure Mode of 7075-T6 Aluminum Alloy Adhesive Joints. J. Manufact. Process. 2021, 66, 302–312. DOI: 10.1016/j.jmapro.2021.04.028.
   Web of Science ®Google Scholar
• Da Silva, L. F. M.; Ferreira, N. M. A. J.; Richter-Trummer, V.; Marques, E. A. S. Effect of Grooves on the Strength of Adhesively Bonded Joints. J. Int. J. Adhes. Adhesive. 2010, 30(8), 735–743. DOI: 10.1016/j.ijadhadh.2010.07.005.
   Web of Science ®Google Scholar
• Hamilton, A.; Xu, Y.; Kartal, M. E.; Gadegaard, N.; Mulvihill, D. M. Enhancing Strength and Toughness of Adhesive Joints via Micro-Structured Mechanical Interlocking. J. Inter. J. Adhes. Adhesive. 2021, 105, 102775. DOI: 10.1016/j.ijadhadh.2020.102775.
   Web of Science ®Google Scholar
• Matsuzaki, R.; Tsukamoto, N.; Taniguchi, J. Mechanical Interlocking by Imprinting of Undercut Micropatterns for Improving Adhesive Strength of Polypropylene. J. Int. J. Adhes. Adhesive. 2016, 68, 124–132. DOI: 10.1016/j.ijadhadh.2016.03.002.
   Web of Science ®Google Scholar
• Jin, C.; Jagota, A.; Hui, C. Y. Structure and Energetics of Dislocations at Micro-Structured Complementary Interfaces Govern Adhesion. J. Advanc. Funct. Mater. 2013, 23(27), 3453–3462. DOI: 10.1002/adfm.201203337.
   Web of Science ®Google Scholar
• Bangash, M. K.; Casalegno, V.; Das, A. K.; Ambrois, S. D. L. P. D.; Ferraris, M. Surface Machining of Ti6Al4V by Means of Micro-Electrical Discharging to Improve Adhesive Joining. J. Mater. Process. Technol. 2020, 286, 116813. DOI: 10.1016/j.jmatprotec.2020.116813.
   Web of Science ®Google Scholar
• Nguyen, A. T. T.; Brandt, M.; Orifici, A. C.; Feih, S. Hierarchical Surface Features for Improved Bonding and Fracture Toughness of Metal–Metal and Metal–Composite Bonded Joints. J. Int. J. Adhes. Adhesive. 2016, 66, 81–92. DOI: 10.1016/j.ijadhadh.2015.12.005.
   Web of Science ®Google Scholar
• Yukimoto, Y.; Matsuzaki, R.; Todoroki, A. Mode II Interfacial Fracture Toughness of Composite/Adhesive Interfaces Obtained by In-Mold Surface Modification. J. Int J Adhes. Adhesive. 2014, 50, 191–198. DOI: 10.1016/j.ijadhadh.2014.01.034.
   Web of Science ®Google Scholar
• Lee, M. J.; Kim, W. S.; Jang, C. J.; Kim, K. H.; Cho, T. M.; Lee, B. C.; Lee, J. J. Analysis and Simulation of the Failure Characteristic of a Single Leg Bending Joint with a Micro-Patterned Surface. J. Adhesion. 2011, 87(7–8), 826–841. DOI: 10.1080/00218464.2011.597319.
   Web of Science ®Google Scholar
• Lee, M. J.; Lim, J. M.; Lee, B. C. Finite Element Analysis of an Adhesive Joint Using the Cohesive Zone Model and Surface Pattern Design of Bonding Surfaces. J. Adhesion. 2013, 89(3), 205–224. DOI: 10.1080/00218464.2013.739042.
   Web of Science ®Google Scholar
• Hikosaka, Y.; Matsuzaki, R.; Todoroki, A.; Mizutani, Y. Enhancement of Interfacial Fracture Toughness of Carbon/Epoxy Composite Adhesive Joints by In-Mold Surface Preparation. J. Express Polymer Lett. 2013, 7(3), 293–303. DOI: 10.3144/expresspolymlett.2013.26.
   Web of Science ®Google Scholar
• Kim, W. S.; Yun, I. H.; Lee, J. J.; Jung, H. T. Evaluation of Mechanical Interlock Effect on Adhesion Strength of Polymer–Metal Interfaces Using Micro-Patterned Surface Topography. J. Int J Adhes. Adhesives. 2010, 30(6), 408–417. DOI: 10.1016/j.ijadhadh.2010.05.004.
   Web of Science ®Google Scholar
• Sun, F.; Pruncu, C. I.; Penchev, P.; Jiang, J.; Dimov, S.; Blackman, B. R. K. Influence of Surface Micropatterns on the Mode I Fracture Toughness of Adhesively Bonded Joints. J. Int. J. Adhesion. Adhesives. 2020, 103, 102718. DOI: 10.1016/j.ijadhadh.2020.102718.
   Web of Science ®Google Scholar
• Suzuki, T.; Matsuzaki, R.; Todoroki, A.; Mizutani, Y. Crack Growth Analysis of a Composite/Adhesive Interface Toughened by In-Mold Surface Preparation. J. Int J Adhesion Adhesive. 2013, 42, 36–43. DOI: 10.1016/j.ijadhadh.2013.01.008.
   Web of Science ®Google Scholar
• Jang, C. J.; Kim, W. S.; Kim, H. C.; Lee, J. J.; Jeong, J. W. Study on the Nano and Micro Surface Morphology Effects on Interfacial Strength of Adhesively Bonded Bimaterials. J. Procedia Engg. 2011, 10, 2585–2590. DOI: 10.1016/j.proeng.2011.04.426.
   Google Scholar
• Kim, W. S.; Kim, K. H.; Jang, C. J.; Jung, H. T.; Lee, J. J. Micro-And Nano-Morphological Modification of Aluminum Surface for Adhesive Bonding to Polymeric Composites. J. Adhesion Sci. Technol. 2013, 27(15), 1625–1640. DOI: 10.1080/01694243.2012.747733.
   Web of Science ®Google Scholar
• Li, Y.; Li, J.; Huang, M.; Xiang, Y.; Yang, Y. Effect of Combined Surface Treatment on the Adhesion Performance of Aluminium-Lithium Alloy. J. Adhesion Sci Technol. 2019, 33(16), 1821–1835. DOI: 10.1080/01694243.2019.1613947.
   Web of Science ®Google Scholar
• Li, J.; Li, Y.; Huang, M.; Xiang, Y.; Bi, R.; Tu, C.; Wang, B. Surface Treatment for Improving Durability of Aluminum-Lithium Adhesive-Bonded Joints Under Hot-Humid Exposure. Coatings. 2019, 9(6), 346. DOI: 10.3390/coatings9060346.
   Web of Science ®Google Scholar
• Zhan, X.; Chen, J.; Gu, C.; Peng, Q.; Chen, J.; Wei, Y. Study on Effects of Pre-Treatment and Surface Roughness on Tensile-Shear Strength of 2060 Al-Li Alloy Adhesive Joints. J. Adhesion. 2017, 93(8), 613–625. DOI: 10.1080/00218464.2015.1124765.
   Web of Science ®Google Scholar
• ASTM D1002-10. Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal to Metal).; ASTM International: USA, 2010.
   Google Scholar
• Guo, L.; Liu, J.; Xia, H.; Li, X.; Zhang, X.; Yang, H.; Yang, Y. Effects of Loading Rate, Temperature, and Thickness on the Tensile Strength of Precision Adhesive Joints. J. Polymer Testing. 2022, 109, 107528. DOI: 10.1016/j.polymertesting.2022.107528.
   Web of Science ®Google Scholar
• Cassie, A. B. D.; Baxter, S. Wettability of Porous Surfaces. J. Transacti. Faraday Soc. 1944, 40, 546–551. DOI: 10.1039/tf9444000546.
   Google Scholar
• Wenzel, R. N. Surface Roughness and Contact Angle. J. Phys Chem. 1949, 53(9), 1466–1467. DOI: 10.1021/j150474a015.
   Web of Science ®Google Scholar
• Guo, L.; Liu, J.; Xia, H.; Li, X.; Zhang, X.; Yang, H. Effects of Surface Treatment and Adhesive Thickness on the Shear Strength of Precision Bonded Joints. J. Polymer Test. 2021, 94, 107063. DOI: 10.1016/j.polymertesting.2021.107063.
   Web of Science ®Google Scholar
• Correia, S.; Anes, V.; Reis, L. Effect of Surface Treatment on Adhesively Bonded Aluminium-Aluminium Joints Regarding Aeronautical Structures. J. Engg. Failure Analy. 2018, 84, 34–45. DOI: 10.1016/j.engfailanal.2017.10.010.
   Web of Science ®Google Scholar
• Alderucci, T.; Borsellino, C.; Di Bella, G. Effect of Surface Pattern on Strength of Structural Lightweight Bonded Joints for Marine Applications. J. Int. J. Adhes. Adhesives. 2021, 117, 103005. DOI: 10.1016/j.ijadhadh.2021.103005.
   Web of Science ®Google Scholar
• Wan, H.; Min, J.; Carlson, B. E.; Lin, J.; Sun, C. Spindle-Shaped Surface Microstructure Inspired by Directional Water Collection Biosystems to Enhance Interfacial Wetting and Bonding Strength. J. ACS Appl. Mater. Inter. 2021, 13(11), 13760–13770. DOI: 10.1021/acsami.0c21857.
   PubMed Web of Science ®Google Scholar