https://orcid.org/0000-0001-6296-9958
References
- M. ANDURKAR et al., “Effects of Build Orientation and Heat Treatment on Neutron Irradiation Hardening in Inconel 625 Fabricated via Laser Powder Bed Fusion,” Proc. 2021 Int. Solid Freeform Fabrication Symp., University of Texas at Austin, 2021; http://dx.doi.org/10.26153/tsw/17624.
- B. JEFFRIES et al., “Characterization of the Neutron Flux During Production of 18F at a Medical Cyclotron and Evaluation of the Incidental Neutron Spectrum for Neutron Damage Studies,” Appl. Radiat. Isot., 154, 108892 (2019); http://dx.doi.org/10.1016/j.apradiso.2019.108892.
- V. O’DONNELL et al., “Novel Method for Fast Neutron Irradiation of Materials via Positron Emission Tomography Isotope Producing Cyclotron,” Radiat. Phys. Chem., 212, 111095 (2023); http://dx.doi.org/10.1016/j.radphyschem.2023.111095.
- V. O’DONNELL et al., “Diagnostic Technique Characterizing Neutron Irradiation Effects on Additively Manufactured Inconel 625 Eliminating the Need for Remote Handling,” Nucl. Technol., 209, 254 (2022); http://dx.doi.org/10.1080/00295450.2022.2120321.
- J. TUCKER et al., “Modeling and Validation of Irradiation Damage in Ni-Based Alloys for Long-Term LWR Applications (Final Report),” U.S. Department of Energy (2019); http://dx.doi.org/10.2172/1511579.
- V. RICHTER and M. RUTHENDORF, “On Hardness and Toughness of Ultrafine and Nanocrystalline Hard Materials,” Int. J. Refract. Met. Hard Mater., 17, 1–3, 141 (1999); http://dx.doi.org/10.1016/S0263-4368(99)00003-7.
- S. OLOVSJÖ, A. WRETLAND, and G. SJÖBERG, “The Effect of Grain Size and Hardness of Wrought Alloy 718 on the Wear of Cemented Carbide Tools,” Wear, 268, 9–10, 1045 (2010); http://dx.doi.org/10.1016/j.wear.2010.01.017.