TRACE Assessment for Simulating Density Wave Oscillations in a Full-Scale BWR Rod Bundle Under Natural Circulation

References

• J. HARRISON and G. E. HITACHI, “Accepted Version of GE Licensing Topical Report (Non-proprietary) NEDO-33006-A,” ADAMS accession No. ML091800512 (2009).
   Google Scholar
• J. REMPE, “Maximum Extended Load Line Limit Analysis Plus (MELLLA+),” presented at the Mtg. of the Nuclear Regulatory Commission with the Advisory Committee for Reactor Safeguards (2016); http://dx.doi.org/10.13140/RG.2.1.2591.4484.
   Google Scholar
• L.-Y. CHENG et al., “TRACE/PARCS Analysis of Anticipated Transient Without Scram with Instability for a MELLLA+ BWR/5,” Nucl. Technol., 196, 238 (2016); http://dx.doi.org/10.13182/NT16-29.
   Web of Science ®Google Scholar
• J. P. DUARTE et al., “Full-Scale Dryout/Rewet Instability Tests in a BWR Rod Bundle and TRACE Assessment,” Nucl. Eng. Des., 370, 110930 (2020); http://dx.doi.org/10.1016/j.nucengdes.2020.110930.
   Web of Science ®Google Scholar
• D. KREUTER et al., “KATHY: FRAMATOME ANP’s Thermal Hydraulic Test Loop,” presented at the 6th Int. Conf. on Nuclear Thermal Hydraulics, Operations and Safety (NUTHOS-6), Nara, Japan, October 4–8, 2004.
   Google Scholar
• “TRACE V5.0 Patch 7 Theory Manual—Field Equations, Solution Methods, and Physical Models,” U.S. Nuclear Regulatory Commission (2022).
   Google Scholar
• J. MARCH-LEUBA, “Density-Wave Instabilities in Boiling Water Reactors,” NUREG/CR-6003, Oak Ridge National Laboratory (1992).
   Google Scholar
• M. ISHII, “Thermally Induced Flow Instabilities in Two-Phase Mixtures in Thermal Equilibrium,” PhD Thesis, Georgia Institute of Technology, School of Mechanical Engineering (1971).
   Google Scholar
• P. SAHA, M. ISHII, and N. ZUBER, “An Experimental Investigation of the Thermally Induced Flow Oscillations in Two-Phase Systems,” J. Heat Transfer, 98, 4, 616 (1976); http://dx.doi.org/10.1115/1.3450609.
   Web of Science ®Google Scholar
• D. PAPINI et al., “On Density Wave Instability Phenomena—Modelling and Experimental Investigation,” Two Phase Flow, Phase Change and Numerical Modeling, A. AHSAN, Ed., IntechOpen (2011).
   Google Scholar
• K. CHETTY et al., “Density Wave Instability Verification of 1D Two-Fluid Model,” Trans. Am. Nucl. Soc., 121, 1731 (2019).
   Google Scholar
• C. D. FLETCHER and R. R. SCHULTZ, “RELAP5/MOD3 Code Manual,” NUREG/CR-5535, U.S. Nuclear Regulatory Commission (1995).
   Google Scholar
• C. TENG, H. XIE, and H. JIA, “Assessment of RELAP5/MOD3.2 for Simulating Density Wave Oscillation with a Two-Phase Natural Circulation Test Facility,” Nucl. Eng. Des., 381, 111358 (2021); http://dx.doi.org/10.1016/j.nucengdes.2021.111358.
   Web of Science ®Google Scholar
• M. COLOMBO et al., “RELAP5/MOD3.3 Study on Density Wave Instabilities in Single Channel and Two Parallel Channels,” Prog. Nucl. Energy, 56, 15 (2012); http://dx.doi.org/10.1016/j.pnucene.2011.12.002.
   Web of Science ®Google Scholar
• M. FURUYA, Y. NISHI, and N. UEDA, “Validation of TRACE Code for Flashing-Induced Density Wave Oscillations in SIRIUS-N Facility, Which Simulated ESBWR,” presented at the 20th Int. Conf. on Nuclear Engineering (ICONE-20), Anaheim, California (2012).
   Google Scholar
• D. TINKLER et al., “NRC ATWS-I Stability Tests with Downskew Axial Power Profile—KATHY Test Series STS123,” NUREG/CR-7272, Framatome, Inc. (2020).
   Google Scholar
• A. SAVITSKY and M. J. E. GOLAY, “Smoothing and Differentiation of Data by Simplified Least Squares Procedures,” Anal. Chem., 36, 8, 1627 (1964); http://dx.doi.org/10.1021/ac60214a047.
   Web of Science ®Google Scholar
• P. HURLEY et al., “Analysis of Flow Instability Onset in a BWR Rod Bundle Geometry,” presented at Advances in Thermal Hydraulics (ATH 2022), Anaheim, California (2022).
   Google Scholar
• K. FUKUDA and T. KOBORI, “Classification of Two-Phase Flow Instability by Density Wave Oscillation Model,” J. Nucl. Sci. Technol., 16, 95 (1979); http://dx.doi.org/10.1080/18811248.1979.9730878.
   Web of Science ®Google Scholar
• D. WANG et al., “Implementation and Assessment of High-Resolution Numerical Methods in TRACE,” Nucl. Eng. Des., 263, 327 (2013); http://dx.doi.org/10.1016/j.nucengdes.2013.05.015.
   Web of Science ®Google Scholar
• “Heat Transfer Behavior and Thermohydraulics Code Testing for Supercritical Water Cooled Reactors (SCWRs),” IAEA-TECDOC-1746, International Atomic Energy Agency (2014).
   Google Scholar
• A. DETKINA et al., “Burnup Credit Evaluation for BWR Spent Fuel from Full Core Calculations,” Appl. Sci., 10, 21, 7549 (2020); http://dx.doi.org/10.3390/app10217549.
   Google Scholar
• J. P. DUARTE, “Understanding the Minimum Film Boiling Temperature in Two-Phase Flow,” PhD Thesis, University of Wisconsin-Madison, Department of Nuclear Engineering & Engineering Physics (2018).
   Google Scholar