Experimental Investigation on Cooling Performance of Borated Water During Immersion Quenching at the Saturated and Sub-Cooled Conditions

References

• M. Dharmendra, S. Suresh, C. S. Sujith Kumar and Q. Yang, “Pool boiling heat transfer enhancement using vertically aligned carbon nanotube coatings on a copper substrate,” Appl. Therm. Eng., vol. 99, pp. 61–71, Apr. 2016. DOI: 10.1016/j.applthermaleng.2015.12.081.
   Web of Science ®Google Scholar
• S. Ahangar Zonouzi, H. Aminfar, and M. Mohammadpourfard, “A review on effects of magnetic fields and electric fields on boiling heat transfer and CHF,” Appl. Therm. Eng., vol. 151, pp. 11–25, Mar. 2019. DOI: 10.1016/j.applthermaleng.2019.01.099.
   Web of Science ®Google Scholar
• S. K. Nayak, P. C. Mishra, M. Ukamanal, and R. Chaini, “Experimental result on heat transfer during quenching of hot steel plate by spray impingement,” Heat Transf. Eng., vol. 39, no. 9, pp. 739–749, May 2018. DOI: 10.1080/01457632.2017.1341193.
   Web of Science ®Google Scholar
• V. Sahai and S. M. Aceves, “Determination of heat transfer during gear blank quenching,” Heat Transf. Eng., vol. 22, no. 4, pp. 56–66, Jul. 2001. DOI: 10.1080/01457630118610.
   Web of Science ®Google Scholar
• C. Agrawal, R. Kumar, A. Gupta, and B. Chatterjee, “Rewetting of vertical hot surface during round water jet impingement cooling,” Heat Transf. Eng., vol. 38, no. 13, pp. 1209–1221, Mar. 2017. DOI: 10.1080/01457632.2016.1239956.
   Web of Science ®Google Scholar
• H. Kim, G. DeWitt, T. McKrell, J. Buongiorno, and L.-W. Hu, “On the quenching of steel and zircaloy spheres in water-based nanofluids with alumina, silica and diamond nanoparticles,” Int. J. Multiphase Flow, vol. 35, no. 5, pp. 427–438, May 2009. DOI: 10.1016/j.ijmultiphaseflow.2009.02.004.
   Web of Science ®Google Scholar
• D. Ciloglu and A. Bolukbasi, “The quenching behavior of aqueous nanofluids around rods with high temperature,” Nucl. Eng. Des., vol. 241, no. 7, pp. 2519–2527, Jul. 2011. DOI: 10.1016/j.nucengdes.2011.04.023.
   Web of Science ®Google Scholar
• L. Zhang, L. Fan, Z. Yu, and K. Cen, “An experimental investigation of transient pool boiling of aqueous nanofluids with graphene oxide nanosheets as characterized by the quenching method,” Int. J. Heat Mass Transf., vol. 73, pp. 410–414, Jun. 2014. DOI: 10.1016/j.ijheatmasstransfer.2014.02.043.
   Web of Science ®Google Scholar
• G. Paul, P. K. Das, and I. Manna, “Leidenfrost phenomenon and rewetting of hot vertical tubes by bottom flooding using nanofluids,” Heat Transf. Eng., vol. 42, no. 16, pp. 1–16, Sep. 2020. DOI: 10.1080/01457632.2020.1794621.
   Web of Science ®Google Scholar
• D. G. Kang, J. H. Kim, and C. Y. Lee, “Minimum film boiling temperature and minimum heat flux in pool boiling of high-temperature cylinder quenched by aqueous surfactant solution,” J. Mech. Sci. Technol., vol. 32, no. 12, pp. 5919–5926, Dec. 2018. DOI: 10.1007/s12206-018-1143-3.
   Web of Science ®Google Scholar
• L. H. P. Zordão, V. A. Oliveira, G. E. Totten, and L. C. F. Canale, “Quenching power of aqueous salt solution,” Int. J. Heat Mass Transf., vol. 140, pp. 807–818, Sep. 2019. DOI: 10.1016/j.ijheatmasstransfer.2019.06.036.
   Web of Science ®Google Scholar
• B. Pattanayak and H. Kothadia, “Experimental study of critical heat flux during pool boiling on mini tubes: effect of subcooling, orientation, and dimensions,” Heat Transf. Eng., vol. 43, no. 11, pp. 896–921, 2022. DOI: 10.1080/01457632.2021.1919971.
   Web of Science ®Google Scholar
• J. Y. Zhang, J. Q. Li, L. Y. Jiang, L. W. Fan and Z. T. Yu, “Pool boiling heat transfer during quenching on a superhydrophilic surface in dilute aqueous saline solutions: effects of the solution concentration and type of salts,” Int. J. Heat Mass Transf., vol. 138, pp. 1117–1127, Aug. 2019. DOI: 10.1016/j.ijheatmasstransfer.2019.04.127.
   Web of Science ®Google Scholar
• S. M. Kwark, M. Amaya, H. Moon, and S. M. You, “Effect of soluble additives, boric acid (H3BO3) and salt (NaCl), in pool boiling heat transfer,” Nucl. Eng. Technol., vol. 43, no. 3, pp. 195–204, Jun. 2011. DOI: 10.5516/NET.2011.43.3.195.
   Web of Science ®Google Scholar
• H. M. Park, Y. H. Jeong, and S. Heo, “Effect of heater material and coolant additives on CHF for a downward facing curved surface,” Nucl. Eng. Des., vol. 278, pp. 344–351, Oct. 2014. DOI: 10.1016/j.nucengdes.2014.07.019.
   Web of Science ®Google Scholar
• S. Jun, J. C. Godinez, S. M. You, and H. Y. Kim, “Pool boiling heat transfer of a copper microporous coating in borated water,” Nucl. Eng. Technol., vol. 52, no. 9, pp. 1939–1944, Sep. 2020. DOI: 10.1016/j.net.2020.02.023.
   Web of Science ®Google Scholar
• A. Inbaoli, C. S. Sujith Kumar, and S. Jayaraj, “Experimental investigation on the effect of additives on different orientations of Al6061 cylindrical sample during immersion quenching,” Appl. Therm. Eng., vol. 204, pp. 118030, Mar. 2022. DOI: 10.1016/j.applthermaleng.2021.118030.
   Web of Science ®Google Scholar
• D. G. Kang, J. H. Kim, S. Kim, B. J. Zhang and C. Y. Lee, “Experimental study on pool boiling regime transitions of vertical rod quenched in aqueous surfactant solutions using inverse heat transfer analysis,” J. Mech. Sci. Technol., vol. 34, no. 11, pp. 4753–4761, Nov. 2020. DOI: 10.1007/s12206-020-1032-4.
   Web of Science ®Google Scholar
• J. Q. Li, et al., “An experimental study of the accelerated quenching rate and enhanced pool boiling heat transfer on rodlets with a superhydrophilic surface in subcooled water,” Exp. Therm. Fluid Sci., vol. 92, pp. 103–112, Apr. 2018. DOI: 10.1016/j.expthermflusci.2017.11.023.
   Web of Science ®Google Scholar
• L. W. Fan, J. Q. Li, D. Y. Li, L. Zhang, and Z. T. Yu, “Regulated transient pool boiling of water during quenching on nanostructured surfaces with modified wettability from superhydrophilic to superhydrophobic,” Int. J. Heat Mass Transf., vol. 76, pp. 81–89, Sep. 2014. DOI: 10.1016/j.ijheatmasstransfer.2014.04.025.
   Web of Science ®Google Scholar
• L. W. Fan, J. Q. Li, L. Zhang, Z. T. Yu, and K. F. Cen, “Pool boiling heat transfer on a nanoscale roughness-enhanced superhydrophilic surface for accelerated quenching in water,” Appl. Therm. Eng., vol. 109, pp. 630–639, Oct. 2016. DOI: 10.1016/j.applthermaleng.2016.08.131.
   Web of Science ®Google Scholar
• J. Xiong, Z. Wang, P. Xiong, T. Lu, and Y. Yang, “Experimental investigation on transient boiling heat transfer during quenching of fuel cladding surfaces,” Int. J. Heat Mass Transf., vol. 148, pp. 119131, Feb. 2020. DOI: 10.1016/j.ijheatmasstransfer.2019.119131.
   Web of Science ®Google Scholar
• R. Nakath, C. Schuster and A. Hurtado, “Bubble size distribution in flow boiling of aqueous boric acid under high pressure,” Nucl. Eng. Des., vol. 262, pp. 562–570, Sep. 2013. DOI: 10.1016/j.nucengdes.2013.06.006.
   Web of Science ®Google Scholar
• J. Lee, Y. H. Jeong, and S. H. Chang, “CHF enhancement in flow boiling system with TSP and boric acid solutions under atmospheric pressure,” Nucl. Eng. Des., vol. 240, no. 10, pp. 3594–3600, Oct. 2010. DOI: 10.1016/j.nucengdes.2010.05.027.
   Web of Science ®Google Scholar
• F. J. Arias, “Boron dilution effect on boiling heat transfer with special reference to nuclear reactors technology,” Ann. Nucl. Energy, vol. 36, no. 9, pp. 1382–1385, Sep. 2009. DOI: 10.1016/j.anucene.2009.06.018.
   Web of Science ®Google Scholar
• A. V. Morozov, et al., “Experimental determination of the thermophysical properties of boric acid for VVER emergency regimes,” Atom. Energy, vol. 125, no. 3, pp. 178–184, Jan. 2019. DOI: 10.1007/s10512-018-00463-4.
   Web of Science ®Google Scholar
• A. A. Avramenko, I. V. Shevchuk, A. A. Moskalenko, P. N. Lohvynenko, and Y. Y. Kovetska, “Instability of a vapor layer on a vertical surface at presence of nanoparticles,” Appl. Therm. Eng, vol. 139, pp. 87–98, Jul. 2018. DOI: 10.1016/j.applthermaleng.2018.04.113.
   Web of Science ®Google Scholar
• K. Umminger, B. Schoen, and S. P. Schollenberger, “Conclusions on boron precipitation following a large break loss of coolant accident,” Int. Top. Meet. Nucl. React. Therm. Hydraul. 2015, NURETH 2015, vol. 4, pp. 2725–2734, 2015.
   Google Scholar
• H. Yeom, K. Sridharan, and M. L. Corradini, “Bubble dynamics in pool boiling on nanoparticle-coated surfaces,” Heat Transf. Eng., vol. 36, no. 12, pp. 1013–1027, 2015. DOI: 10.1080/01457632.2015.979116.
   Web of Science ®Google Scholar