Exergetic Performance of Jet Impingement Bifacial Photovoltaic-Thermal Solar Air Collector with Different Packing Factors and Jet Distributions

References

• C. Choudhury and H. P. Garg, “Evaluation of a jet plate solar air heater,” Sol. Energy, vol. 46, no. 4, pp. 199–209, 1991. DOI: 10.1016/0038-092X(91)90064-4.
   Web of Science ®Google Scholar
• M. Belusko, W. Saman, and F. Bruno, “Performance of jet impingement in unglazed air collectors,” Sol. Energy, vol. 82, no. 5, pp. 389–398, 2008. DOI: 10.1016/j.solener.2007.10.005.
   Web of Science ®Google Scholar
• R. Chauhan and N. S. Thakur, “Heat transfer and friction factor correlations for impinging jet solar air heater,” Exp. Therm. Fluid Sci., vol. 44, pp. 760–767, Jan. 2013. DOI: 10.1016/j.expthermflusci.2012.09.019.
   Web of Science ®Google Scholar
• R. Chauhan and N. S. Thakur, “Investigation of the thermohydraulic performance of impinging jet solar air heater,” Energy, vol. 68, pp. 255–261, Apr. 2014. DOI: 10.1016/j.energy.2014.02.059.
   Web of Science ®Google Scholar
• R. Chauhan, T. Singh, N. S. Thakur, and A. Patnaik, “Optimization of parameters in solar thermal collector provided with impinging air jets based upon preference selection index method,” Renew. Energy, vol. 99, pp. 118–126, Dec. 2016. DOI: 10.1016/j.renene.2016.06.046.
   Web of Science ®Google Scholar
• H. Y. Chan, A. A. Vinson, S. S. S. Baljit, and M. H. Ruslan, “Comparison of thermal performances between low porosity perforate plate and flat plate solar air collector,” J. Phys.: Conf. Ser., vol. 989, pp. 012001, 2018. DOI: 10.1088/1742-6596/989/1/012001.
   Google Scholar
• M. M. Matheswaran, T. V. Arjunan, and D. Somasundaram, “Analytical investigation of solar air heater with jet impingement using energy and exergy analysis,” Sol. Energy, vol. 161, pp. 25–37, Feb. 2018. DOI: 10.1016/j.solener.2017.12.036.
   Web of Science ®Google Scholar
• W. E. Ewe et al., “Overview on recent PVT systems with jet impingement,” IJHT, vol. 39, no. 6, pp. 1951–1956, 2021. DOI: 10.18280/ijht.390633.
   Google Scholar
• M. Jaszczur, J. Teneta, Q. Hassan, E. Majewska, and R. Hanus, “An experimental and numerical investigation of photovoltaic module temperature under varying environmental conditions,” Heat Transf. Eng., vol. 42, no. 3-4, pp. 354–367, 2021. DOI: 10.1080/01457632.2019.1699306.
   Web of Science ®Google Scholar
• M. Chaabane, H. Mhiri, and P. Bournot, “Performance optimization of water-cooled concentrated photovoltaic system,” Heat Transf. Eng., vol. 37, no. 1, pp. 76–81, 2016. DOI: 10.1080/01457632.2015.1042344.
   Web of Science ®Google Scholar
• S. A. Brideau and M. R. Collins, “Development and validation of a hybrid PV/Thermal air based collector model with impinging jets,” Sol. Energy, vol. 102, pp. 234–246, Apr. 2014. DOI: 10.1016/j.solener.2014.01.022.
   Web of Science ®Google Scholar
• P. Ooshaksaraei, K. Sopian, S. H. Zaidi, and R. Zulkifli, “Performance of four air-based photovoltaic thermal collectors configurations with bifacial solar cells,” Renew. Energy, vol. 102, pp. 279–293, Mar. 2017. DOI: 10.1016/j.renene.2016.10.043.
   Web of Science ®Google Scholar
• H. A. Hasan, K. Sopian, A. H. Jaaz, and A. N. Al-Shamani, “Experimental investigation of jet array nanofluids impingement in photovoltaic/thermal collector,” Sol. Energy, vol. 144, pp. 321–334, Mar. 2017. DOI: 10.1016/j.solener.2017.01.036.
   Web of Science ®Google Scholar
• H. A. Hasan, K. Sopian, and A. Fudholi, “Photovoltaic thermal solar water collector designed with a jet collision system,” Energy, vol. 161, pp. 412–424, Oct. 2018. DOI: 10.1016/j.energy.2018.07.141.
   Web of Science ®Google Scholar
• A. H. Jaaz, K. Sopian, and T. S. Gaaz, “Study of the electrical and thermal performances of photovoltaic thermal collector-compound parabolic concentrated,” Results Phys., vol. 9, pp. 500–510, Jun. 2018. DOI: 10.1016/j.rinp.2018.03.004.
   Web of Science ®Google Scholar
• M. Javidan and A. J. Moghadam, “Experimental investigation on thermal management of a photovoltaic module using water-jet impingement cooling,” Energy Convers. Manag., vol. 228, pp. 113686, Jan. 2021. DOI: 10.1016/j.enconman.2020.113686.
   Web of Science ®Google Scholar
• W. E. Ewe, A. Fudholi, K. Sopian, and N. Asim, “Modeling of bifacial photovoltaic-thermal (PVT) air heater with jet plate,” IJHT, vol. 39, no. 4, pp. 1117–1122, 2021. DOI: 10.18280/ijht.390409.
   Google Scholar
• A. Fudholi, K. Sopian, M. Y. Othman, M. H. Ruslan, and B. Bakhtyar, “Energy analysis and improvement potential of finned double-pass solar collector,” Energy Convers. Manag., vol. 75, pp. 234–240, Nov. 2013. DOI: 10.1016/j.enconman.2013.06.021.
   Web of Science ®Google Scholar
• A. Lingayat, V. P. Chandramohan, and V. R. K. Raju, “Energy and exergy analysis on drying of banana using indirect type natural convection solar dryer,” Heat Transf. Eng., vol. 41, no. 6-7, pp. 551–561, 2020. DOI: 10.1080/01457632.2018.1546804.
   Web of Science ®Google Scholar
• S. Singh and P. Dhiman, “Thermal and thermohydraulic efficiency of recyclic-type double-pass solar air heaters with fins and baffles,” Heat Transf. Eng., vol. 37, no. 15, pp. 1302–1317, 2016. DOI: 10.1080/01457632.2015.1119619.
   Web of Science ®Google Scholar
• X. Sun, M. R. Khan, C. Deline, and M. A. Alam, “Optimization and performance of bifacial solar modules: a global perspective,” Appl. Energy, vol. 212, no. 1, pp. 1601–1610, 2018. DOI: 10.1016/j.apenergy.2017.12.041.
   Google Scholar
• A. Ibrahim, A. Fudholi, K. Sopian, M. Y. Othman, and M. H. Ruslan, “Efficiencies and improvement potential of building integrated photovoltaic thermal (BIPVT) system,” Energy Convers. Manag., vol. 77, pp. 527–534, Jan. 2014. DOI: 10.1016/j.enconman.2013.10.033.
   Web of Science ®Google Scholar
• A. Fudholi, K. Sopian, M. H. Ruslan, and M. Y. Othman, “Performance and cost benefits analysis of double-pass solar collector with and without fins,” Energy Convers. Manag., vol. 76, pp. 8–19, Dec. 2013. DOI: 10.1016/j.enconman.2013.07.015.
   Web of Science ®Google Scholar
• R. Vaziri, M. Ilkan, and F. Egelioglu, “Experimental performance of perforated glazed solar air heaters and unglazed transpired solar air heater,” Sol. Energy, vol. 119, pp. 251–260, Sep. 2015. DOI: 10.1016/j.solener.2015.06.043.
   Web of Science ®Google Scholar
• R. Chauhan, N. S. Thakur, T. Singh, and M. Sethi, “Exergy based modeling and optimization of solar thermal collector provided with impinging air jets,” J. King Saud Univ. - Eng. Sci., vol. 30, no. 4, pp. 355–362, 2018. DOI: 10.1016/j.jksues.2016.07.003.
   Google Scholar
• R. Saidur, G. Boroumandjazi, S. Mekhlif, and M. Jameel, “Exergy analysis of solar energy applications,” Renew. Sustain. Energy Rev., vol. 16, no. 1, pp. 350–356, 2012. DOI: 10.1016/j.rser.2011.07.162.
   Web of Science ®Google Scholar