Critical evaluation of epoxy-hemp-pineapple-palm fiber composites using hybrid AHM-TOPSIS technique for sustainable structural applications

References

• Alshahrani, H., B. A. Alshammari, A. H. Shah, and A. Q. Dayo. 2022. “Development of Hybrid Composite Utilizing Micro-Cellulose Fibers Extracted from Date Palm Rachis in the Najran Region.” Polymers 14 (21): 4687–4706. doi:10.3390/polym14214687.
   PubMed Web of Science ®Google Scholar
• Anojkumar, L., M. Ilangkumaran, and V. Sasirekha. 2014. “Comparative Analysis of MCDM Methods for Pipe Material Selection in Sugar Industry.” Expert Systems with Applications 41 (6): 2964–2980. doi:10.1016/j.eswa.2013.10.028.
   Web of Science ®Google Scholar
• Avikal, S., A. Kumar Singh, K. C. Nithin Kumar, and G. Kumar Badhotiya. 2021. “A Fuzzy-AHP and TOPSIS Based Approach for Selection of Metal Matrix Composite Used in Design and Structural Applications.” Materials Today: Proceedings 46 (20): 11050–11053. doi:10.1016/j.matpr.2021.02.161.
   Google Scholar
• Bledzki, A. K., and J. Gassan. 1999. “Composites Reinforced with Cellulose Based Fibres.” Progress in Polymer Science 24 (2): 221–274. doi:10.1016/S0079-6700(98)00018-5.
   Web of Science ®Google Scholar
• Daud, Z., M. Z. Mohd Hatta, A. S. Mohd Kassim, H. Awang, and A. Mohd Aripin. 2014. “Exploring of Agro Waste (Pineapple Leaf, Corn Stalk, and Napier Grass) by Chemical Composition and Morphological Study.” BioResources 9 (1): 872–880. doi:10.15376/biores.9.1.872-880.
   Web of Science ®Google Scholar
• Ferreira, J. M., C. Capela, J. Manaia, and J. D. Costa. 2016. “Mechanical Properties of Woven Mat Jute/Epoxy Composites.” Materials Research 19 (3): 702–710. doi:10.1590/1980-5373-MR-2015-0422.
   Web of Science ®Google Scholar
• Hargitai, H., I. Rácz, and R. D. Anandjiwala. 2008. “Development of HEMP Fiber Reinforced Polypropylene Composites.” Journal of Thermoplastic Composite Materials 21 (2): 165–174. doi:10.1177/0892705707083949.
   Web of Science ®Google Scholar
• Ishak, N. M., S. D. Malingam, and M. R. Mansor. 2016. “Selection of Natural Fibre Reinforced Composites Using Fuzzy VIKOR for Car Front Hood.” International Journal of Materials and Product Technology 53 (3–4): 267–285. doi:10.1504/ijmpt.2016.079205.
   Web of Science ®Google Scholar
• Jawaid, M., M. Asim, P. M. Tahir, and M. Nasir. 2020. Pineapple Leaf Fibers Processing, Properties and Applications. Singapore: Springer Nature. doi:10.1007/978-981-15-1416-6.
   Google Scholar
• Loganathan, T. M., M. T. H. Sultan, Q. Ahsan, M. Jawaid, J. Naveen, A. U. M. Shah, and L. S. Hua. 2020. “Characterization of Alkali Treated New Cellulosic Fibre from Cyrtostachys Renda.” Journal of Materials Research and Technology 9 (3): 3537–3546. doi:10.1016/j.jmrt.2020.01.091.
   Google Scholar
• Mateˇjka, V., Z. Fu, J. Kukutschova, S. Qi, S. Jiang, X. Zhang, R. Yun, M. Vaculik, M. Heliova, and Y. Lu. 2013. “Jute Fibers and Powderized Hazelnut Shells as Natural Fillers in Non-Asbestos Organic Non- Metallic Friction Composites.” Materials & Design 51:847–853. doi:10.1016/j.matdes.2013.04.079.
   Web of Science ®Google Scholar
• Mitra, B. C. 2014. “Environment Friendly Composite Materials: Biocomposites and Green Composites.” Defence Science Journal 64 (3): 244–261. doi:10.14429/dsj.64.7323.
   Web of Science ®Google Scholar
• Mohd Izwan, S., S. M. Sapuan, M. Y. M. Zuhri, and A. R. Mohamed. 2020. “Effects of Benzoyl Treatment on NaOH Treated Sugar Palm Fiber: Tensile, Thermal, and Morphological Properties.” Journal of Materials Research and Technology 9 (3): 5805–5814. doi:10.1016/j.jmrt.2020.03.105.
   Google Scholar
• Moya, R., F. Muñoz, S. Julio Mata, and F. Roy Soto. 2013. “An Anatomical Comparison Between Bunch and Fruit of Oil Palm with Pineapple Leaf and Three Woods from Plantations in Costa Rica.” Journal of Oil Palm Research 25 (1): 138–148.
   Web of Science ®Google Scholar
• Mukhametzyanov, I., and D. Pamucar. 2018. “A Sensitivity Analysis in Mcdm Problems: A Statistical Approach.” Decision Making: Applications in Management and Engineering 1 (2): 51–80. doi:10.31181/dmame1802050m.
   Google Scholar
• Mwaikambo, L. Y., and M. P. Ansell. 2003. “Hemp Fibre Reinforced Cashew Nut Shell Liquid Composites.” Composites Science and Technology 63 (9): 1297–1305. doi:10.1016/S0266-3538(03)00101-5.
   Web of Science ®Google Scholar
• Nazrul Islam, M., and M. A. Gafur. 2019. “PP-Coir Composites (PPCC): Fabrication and Study of Flexural Properties.” Modern Chemistry 7 (4): 114–117. doi:10.11648/j.mc.20190704.15.
   Google Scholar
• Qiu, L., N. Zhu, Y. Feng, E. E. Michaelides, G. Żyła, D. Jing, X. Zhang, P. M. Norris, C. N. Markides, and O. Mahian. 2020. “A Review of Recent Advances in Thermophysical Properties at the Nanoscale: From Solid State to Colloids.” Physics Reports 843:1–81. doi:10.1016/j.physrep.2019.12.001.
   Google Scholar
• Raghunathan, V., V. Ayyappan, J. D. J. Dhilip, D. Sundarrajan, S. M. Rangappa, and S. Siengchin. 2023. “Influence of Alkali-Treated and Raw Zanthoxylum Acanthopodium Fibers on the Mechanical, Water Resistance, and Morphological Behavior of Polymeric Composites for Lightweight Applications.” Biomass Conversion and Biorefinery 1–13. doi:10.1007/s13399-023-04240-7.
   Web of Science ®Google Scholar
• Raghunathan, V., J. D. J. Dhilip, M. Ramesh, R. Kumaresan, S. Govindarajan, S. Karunamoorth, S. Shanmugam, and A. Khan. 2022a. “The Effects of Stacking Sequence on the Mechanical and Water Absorption Properties of Areca-Pineapple Fiber-Based Epoxy Composites.” Journal of Natural Fibers 19 (14): 9681–9692. doi:10.1080/15440478.2021.1990183.
   Web of Science ®Google Scholar
• Raghunathan, V., K. Palani, P. Shinu, J. D. J. Dhilip, G. Yoganjaneyulu, and S. Ganesh. 2022b. “Influence of Parthenium Hysterophorus and Impomea Pes-Caprae Fibers Stacking Sequence on the Performance Characteristics of Epoxy Composites.” Journal of Natural Fibers 19 (12): 4456–4466. doi:10.1080/15440478.2020.1863292.
   Web of Science ®Google Scholar
• Raju, K., and M. Balakrishnan. 2020. “Evaluation of Mechanical Properties of Palm Fiber/Glass Fiber and Epoxy Combined Hybrid Composite Laminates.” Materials Today: Proceedings 21 (1): 52–55. doi:10.1016/j.matpr.2019.05.359.
   Google Scholar
• Raju, R. S. S., and B. Venkata Siva. 2021. “Fabrication and Tribological Studies of Al-CSA Composite Using RSM.” International Journal of Materials Engineering Innovation 12 (2): 83–102. doi:10.1504/IJMATEI.2021.115596.
   Google Scholar
• Raju, S., S. Palli, P. Devi Prasad, V. R. Menda, and B. Ramakrishna. 2023. “A Hybrid AHP-TOPSIS, MOORA Technique for Multi-Objective Optimization of Thermal, Mechanical, and Water Absorption Behavior of Epoxy/Hemp, Pine Apple, and Palm Fiber Composites.” Journal of the Chinese Institute of Engineers 47 (1): 23–36. doi:10.1080/02533839.2023.2274092.
   Web of Science ®Google Scholar
• Raju, S. S., G. B. Murali, and P. K. Patnaik. 2020. “Ranking of Al-CSA Composite by MCDM Approach Using AHP–TOPSIS and MOORA Methods.” Journal of Reinforced Plastics and Composites 39 (19–20): 721–732. doi:10.1177/0731684420924833.
   Web of Science ®Google Scholar
• Rallabandi, S. R., S. K. Adapa, C. J. Rao, and S. Yanda. 2022. “Evaluation of Thermo-Mechanical Behavior of Hemp Fiber Polymer.” Composites: Mechanics, Computations, Applications: An International Journal 13 (3): 113–132. doi:10.1615/CompMechComputApplIntJ.2022043103.
   Google Scholar
• Ramanaiah, K., S. P. Sanaka, A. V. R. Prasad, and K. H. Reddy. 2023. “Thermo-Physical and Fire Properties of Sustainable Bio Composites: Experimental and Computational Analysis.” Journal of Natural Fibers 20 (1): 1–14. doi:10.1080/15440478.2022.2162653.
   Web of Science ®Google Scholar
• Rezghi Maleki, H., M. Hamedi, M. Kubouchi, and Y. Arao. 2019. “Experimental Study on Drilling of Jute Fiber Reinforced Polymer Composites.” Journal of Composite Materials 53 (3): 283–295. doi:10.1177/0021998318782376.
   Web of Science ®Google Scholar
• Ridzuana, M. J. M., M. S. A. Majid, A. Khasri, E. H. D. Gan, Z. M. Razlan, and S. Syahrullail. 2019. “Effect of Pineapple Leaf (PALF), Napier, and Hemp Fibres as Filler on the Scratch Resistance of Epoxy Composites.” Journal of Materials Research and Technology 8 (6): 5384–5395. doi:10.1016/j.jmrt.2019.09.005.
   Google Scholar
• Ruuska, T., J. Vinha, and H. Kivioja. 2017. “Measuring Thermal Conductivity and Specific Heat Capacity Values of Inhomogeneous Materials with a Heat Flow Meter Apparatus.” Journal of Building Engineering 9:135–141. doi:10.1016/j.jobe.2016.11.011.
   Web of Science ®Google Scholar
• Saba, N., O. Y. Alothman, Z. Almutairi, M. Jawaid, and W. Ghori. 2019. “Date Palm Reinforced Epoxy Composites: Tensile, Impact and Morphological Properties.” Journal of Materials Research and Technology 8 (5): 3959–3969. doi:10.1016/j.jmrt.2019.07.004.
   Google Scholar
• Sajid, L., O. Azmami, Z. El Ahmadi, A. Benayada, and S. Gmouh. 2021. “Extraction and Characterization of Palm Fibers and Their Use to Produce Wool- and Polyester-Blended Nonwovens.” Journal of Industrial Textiles 51 (2): 177–205. doi:10.1177/1528083719877007.
   Web of Science ®Google Scholar
• Sathishkumar, T. P., J. Naveen, and S. Satheeshkumar. 2014. “Hybrid Fiber Reinforced Polymer Composites - a Review.” Journal of Reinforced Plastics and Composites 33 (5): 454–471. doi:10.1177/0731684413516393.
   Web of Science ®Google Scholar
• Shahzad, A. 2012. “Hemp Fiber and Its Composites - A Review.” Journal of Composite Materials 46 (8): 973–986. doi:10.1177/0021998311413623.
   Web of Science ®Google Scholar
• Shankar, A. N., V. Jagota, N. H. Jamadon, R. Raffik, V. L. Suneetha, I. A. Samori, and L. Karnan. 2022. “An AHP-TOPSIS Approach for Optimizing the Mechanical Performance of Natural Fiber-Based Green Composites.” Advances in Materials Science and Engineering 2022: 1–9. doi:10.1155/2022/1263237.
   Google Scholar
• Sharma, N., R. D. Gupta, R. Khanna, R. C. Sharma, and Y. K. Sharma. 2023. “Machining of Ti-6Al-4V Biomedical Alloy by WEDM: Investigation and Optimization of MRR and Rz Using Grey-Harmony Search.” World Journal of Engineering 20 (2): 221–234. doi:10.1108/WJE-05-2021-0278.
   Web of Science ®Google Scholar
• Singh, G., N. Sharma, S. Goyal, and R. C. Sharma. 2021. “Comparative Measurements of Physical and Mechanical Properties of AA6082 Based Composites Reinforced with B 4 C and SiC Particulates Produced via Stir Casting.” Metals and Materials International 27 (4): 4333–4345. doi:10.1007/s12540-020-00666-0.
   Google Scholar
• Upadhyay, R. K., and A. Kumar. 2019. “Epoxy-Graphene-MoS2 Composites with Improved Tribological Behavior Under Dry Sliding Contact.” Tribology International 130: 106–118. doi:10.1016/j.triboint.2018.09.016.
   Web of Science ®Google Scholar