Thermochemical modelling and mechanical property of the Al-7.6Si-xZr alloy

References

• Zhuo X, Zhang Q, Liu H, et al. Enhanced tensile strength and ductility of an Al-6Si-3Cu alloy processed by room temperature rolling. J Alloys Compd. 2022;899:163321. doi:10.1016/j.jallcom.2021.163321
   Web of Science ®Google Scholar
• Qin R, Yan RF, Guan ZP, et al. Effect of vanadium on Fe-rich phase, mechanical properties and thermal conductivity of hypoeutectic Al-Si alloy. Mater Res Express. 2021;8:026518. doi:10.1088/2053-1591/abe5f0
   Web of Science ®Google Scholar
• Biswas P, Prasadu KD, Mondal MK. Effect of Bi addition on microstructure and mechanical properties of hypereutectic Al-17.6Si alloy. Mater Res Express. 2019;6:1165b9. doi:10.1088/2053-1591/ab4d34
   Web of Science ®Google Scholar
• Zhu X, Wang S, Dong X, et al. Morphologically templated nucleation of primary Si on AlP in hypereutectic Al-Si alloys. J Mater Sci Technol. 2022;100:36–45. doi:10.1016/j.jmst.2021.06.009
   Web of Science ®Google Scholar
• Charandabi FK, Jafarian HR, Mahdavi S, et al. Modification of microstructure, hardness, and wear characteristics of an automotive-grade Al-Si alloy after friction stir processing. J Adhes Sci Technol. 2021;35:2696–2709. doi:10.1080/01694243.2021.1898858
   Web of Science ®Google Scholar
• Soleymanpour M, Aval HJ, Jamaati R. Achieving high strength and superior ductility in Al-Si alloy by cold rolling and friction stir processing. J Alloys Compd. 2022;896:163102. doi:10.1016/j.jallcom.2021.163102
   Web of Science ®Google Scholar
• Dang B, Jian Z, Xu J. Effect of ultrasonic melt treatment on thermal kinetics of hypereutectic Al-Si alloy. J Therm Anal Calorim. 2022;147(16):8651–8655. doi:10.1007/s10973-021-11187-2
   Web of Science ®Google Scholar
• Rashno S, Reihanian M, Ranjbar K. Tensile and creep properties of Al-7Si-0.3Mg alloy with Zr and Er addition. Mater Sci Technol. 2020;36(14):1603–1613. doi:10.1080/02670836.2020.1809144
   Web of Science ®Google Scholar
• Zhang YH, Ye CY, Shen YP, et al. Grain refinement of hypoeutectic Al-7wt.%Si alloy induced by an Al-V-B master alloy. J Alloys Compd. 2020;812:152022. doi:10.1016/j.jallcom.2019.152022
   Web of Science ®Google Scholar
• Biswas P, Patra S, Roy H, et al. Effect of Mn addition on the mechanical properties of Al-12.6Si alloy: role of Al15(MnFe)3Si2 intermetallic and microstructure modification. Met Mater Int. 2021;27:1713–1727. doi:10.1007/s12540-019-00535-5
   Web of Science ®Google Scholar
• Xu J, Li Y, Ma K, et al. In-situ observation of grain refinement dynamics of hypoeutectic Al-Si alloy inoculated by Al-Ti-Nb-B alloy. Scripta Mater. 2020;187:142–147. doi:10.1016/j.scriptamat.2020.06.020
   Web of Science ®Google Scholar
• Cheng W, Liu CY, Ge ZJ. Optimizing the mechanical properties of Al-Si alloys through friction stir processing and rolling. Mater Sci Eng A. 2021;804:140786. doi:10.1016/j.msea.2021.140786
   Web of Science ®Google Scholar
• Yan J, Liu G, Zhao X, et al. Rapid homogeneous precipitation of nano-sized Si in Al-1%Si alloy by electric pulses. Mater Sci Technol. 2021;37:144–150. doi:10.1080/02670836.2021.1874123
   Web of Science ®Google Scholar
• Vasudevan G, Anbukkarasi R, Sanil H, et al. Combined effect of Sr-addition and pressure induced solidification on eutectic-Si morphology and mechanical properties of squeeze cast Al-Si binary alloy. Mater Today Commun. 2023;34:105104. doi:10.1016/j.mtcomm.2022.105104
   Web of Science ®Google Scholar
• Yuan J, Pan S, Zheng T, et al. Nanoparticle promoted solution treatment by reducing segregation in AA7034. Mater Sci Eng A. 2021;822:141691. doi:10.1016/j.msea.2021.141691
   Web of Science ®Google Scholar
• Narducci CJ, Brollo GL, Mota de Siqueira RH, et al. Effect of Nb addition on the size and morphology of the β-Fe precipitates in recycled Al-Si alloys. Sci Rep. 2021;11:9613. doi:10.1038/s41598-021-89050-5
   PubMed Web of Science ®Google Scholar
• Yang Y, Geng K, Li S, et al. Highly ductile hypereutectic Al-Si alloys fabricated by selective laser melting. J Mater Sci Technol. 2022;110:84–95. doi:10.1016/j.jmst.2021.07.050
   Web of Science ®Google Scholar
• Gomes LF, Kugelmeier CL, Rovere CAD, et al. Effects of Ag addition and dendritic scale on the corrosion behaviour of the hypoeutectic Al-5 wt% Si alloy. J Appl Electrochem. 2022;52:653–665. doi:10.1007/s10800-021-01661-y
   Web of Science ®Google Scholar
• Li C, Pan Y, Lu T, et al. Effects of Ti and La additions on the microstructures and mechanical properties of B-refined and Sr-modified Al-11Si alloys. Met Mater Int. 2018;24:1133–1142. doi:10.1007/s12540-018-0058-y
   Web of Science ®Google Scholar
• Thasleem P, Kumar D, Joy ML, et al. Effect of heat treatment and electric discharge alloying on the lubricated tribology of Al-Si alloy fabricated by selective laser melting. Wear. 2022;494-495:204244. doi:10.1016/j.wear.2022.204244
   Web of Science ®Google Scholar
• Dong TS, Liu M, Feng Y, et al. Microstructure and properties of a wear resistant Al-25Si-4Cu-1Mg coating prepared by supersonic plasma spraying. Int J Miner Metall Mater. 2020;27:1287–1294. doi:10.1007/s12613-019-1950-2
   Web of Science ®Google Scholar
• Hazra B, Bera S, Show BK. Enhanced elevated temperature wear resistance of Al-17Si-5Cu alloy after a novel short duration heat treatment. Int J Miner Metall Mater. 2019;26:360–368. doi:10.1007/s12613-019-1745-5
   Web of Science ®Google Scholar
• Nowak M, Bolzoni L, Babu NH. The effect of Nb-B inoculation on binary hypereutectic and near-eutectic LM13 Al-Si cast alloys. J Alloys Compd. 2015;641:22–29. doi:10.1016/j.jallcom.2015.04.053
   Web of Science ®Google Scholar
• Yadav S, Tewari SP, Singh JK, et al. Effects of mechanical vibration on the physical, metallurgical and mechanical properties of cast A308 (LM21) aluminum alloy. Int J Miner Metall Mater. 2022;29:1206–1215. doi:10.1007/s12613-020-2209-7
   Web of Science ®Google Scholar
• Pan S, Yuan J, Jin K, et al. Influence of Mg on reaction and properties of Al–Si/TiC nanocomposites. Mater Sci Eng A. 2022;840:142992. doi:10.1016/j.msea.2022.142992
   Web of Science ®Google Scholar
• Azimi H, Nourouzi S, Jamaati R. Effects of Ti particles and T6 heat treatment on the microstructure and mechanical properties of A356 alloy fabricated by compocasting. Mater Sci Eng A. 2021;818:141443. doi:10.1016/j.msea.2021.141443
   Web of Science ®Google Scholar
• Wang Y, Wu G, Zhang L, et al. Microstructure evolution and mechanical properties of a cast and heat-treated Al–Li–Cu–Mg alloy: effect of cooling rate during casting. Mater Sci Eng: A. 2023:145366. doi:10.1016/j.msea.2023.145366
   Web of Science ®Google Scholar
• Pan S, Zheng T, Yao G, et al. High-strength and high-conductivity in situ Cu–TiB2 nanocomposites. Mater Sci Eng A. 2022;831:141952. doi:10.1016/j.msea.2021.141952
   Web of Science ®Google Scholar
• Yang Q, Shi W, Wang M, et al. Influence of cooling rate on the microstructure and mechanical properties of Al-Cu-Li-Mg-Zn alloy. J Mater Res Technol. 2023;25:3151–3166. doi:10.1016/j.jmrt.2023.06.094
   Google Scholar
• Lan L, Zhang H, Yang Z, et al. Significant transitions of microstructure and mechanical properties in laser additive manufacturing AlCoCrFeNi2.1 eutectic high-entropy alloy under heat treatment. J Mater Res Technol. 2023;25:6250–6262. doi:10.1016/j.jmrt.2023.07.077
   Google Scholar
• Li Y, Yang M, Li K, et al. In-situ study of effects of heat treatments and loading methods on fracture behaviors of a cast Al–Si alloy. Mater Today Commun. 2021;28:102680. doi:10.1016/j.mtcomm.2021.102680
   Web of Science ®Google Scholar
• Choudhary C, Pramanick AK, Sahoo KL, et al. Evaluation of microstructure and mechanical properties of M-SIMA processed Al–7Si alloy. Mater Sci Technol. 2022;38(8):912–925. doi:10.1080/02670836.2022.2067614
   Web of Science ®Google Scholar
• Biswas P, Gupta S, Mondal MK, et al. Structure-Property correlation of hypoeutectic Al-7.6 Si alloys with and without Al-5Ti-1B grain refiner. J Sci Ind Res (JSIR). 2020;79:696–700. doi:10.56042/jsir.v79i8.41414
   Web of Science ®Google Scholar
• Acharya M, Mondol S, Mandal A. Development of high strength suction cast hypereutectic Al–20Si alloy containing gamma alumina and strontium. Mater Sci Technol. 2020;36:623–630. doi:10.1080/02670836.2020.1724403
   Web of Science ®Google Scholar
• Bhandari R, Biswas P, Pathania A, et al. Equal channel angular pressing (ECAP) die design through finite element analysis method for non-strain hardening material. Can Metall Q. 2022;61(4):493–512. doi:10.1080/00084433.2022.2046905
   Web of Science ®Google Scholar
• Zheng Q, Zhang L, Jiang H, et al. Effect mechanisms of micro-alloying element La on microstructure and mechanical properties of hypoeutectic Al-Si alloys. J Mater Sci Technol. 2020;47:142–151. doi:10.1016/j.jmst.2019.12.021
   Web of Science ®Google Scholar
• Mao F, Qiao Y, Zhang P, et al. Modification mechanism of rare earth Eu on eutectic Si in hypoeutectic Al-Si alloy. Int J Metalcasting. 2022;16:634–645. doi:10.1007/s40962-021-00626-3
   Web of Science ®Google Scholar
• Ren Z, Pu Z, Liu D-R. Prediction of grain-size transition during solidification of hypoeutectic Al-Si alloys by an improved three-dimensional sharp-interface model. Comput Mater Sci. 2022;203:111131, doi:10.1016/j.commatsci.2021.111131
   Web of Science ®Google Scholar
• Zhang X, Wang D, Zhou Y, et al. Exploring crystal structures, stability and mechanical properties of Fe, Mn-containing intermetallics in Al-Si alloy by experiments and first-principles calculations. J Alloys Compd. 2021;876:160022. doi:10.1016/j.jallcom.2021.160022
   Web of Science ®Google Scholar
• Murty BS, Kori SA, Chakraborty M. Grain refinement of aluminium and its alloys by heterogeneous nucleation and alloying. Int Mater Rev. 2002;47:3–29. doi:10.1179/095066001225001049
   Web of Science ®Google Scholar
• Zhang JH, Xing SM, Ao XH, et al. Effect of Ca modification on the elemental composition, microstructure and tensile properties of Al−7Si−0.3Mg alloy. Int J Minerals Metall Mater. 2019;26:1457–1466. doi:10.1007/s12613-019-1838-1
   Web of Science ®Google Scholar
• Li Y, Jiang Y, Hu B, et al. Novel Al-Ti-Nb-B grain refiners with superior efficiency for Al-Si alloys. Scripta Mater. 2020;187:262–267. doi:10.1016/j.scriptamat.2020.06.037
   Web of Science ®Google Scholar
• Jiang B, Ji Z, Hu M, et al. A novel modifier on eutectic Si and mechanical properties of Al-Si alloy. Mater Lett. 2019;239:13–16. doi:10.1016/j.matlet.2018.12.045
   Web of Science ®Google Scholar
• Zhao C, Li Y, Xu J, et al. Enhanced grain refinement of Al-Si alloys by novel Al-V-B refiners. J Mater Sci Technol. 2021;94:104–112. doi:10.1016/j.jmst.2021.02.065
   Web of Science ®Google Scholar
• Basak S, Biswas P, Patra S, et al. Effect of TiB2 and Al3Ti on microstructure, mechanical properties and fracture behaviour of near eutectic Al-12.6Si alloy. Int J Minerals Metall Mater. 2021;28:1174–1185. doi:10.1007/s12613-020-2070-8
   Web of Science ®Google Scholar
• Muhaffel F, Baydogan M, Cimenoglu H. A study to enhance the mechanical durability of the MAO coating fabricated on the 7075 Al alloy for wear-related high temperature applications. Surf Coat Technol. 2021;409:126843. doi:10.1016/j.surfcoat.2021.126843
   Web of Science ®Google Scholar
• standard B. Aluminium and aluminium alloy ingots and castings for general engineering purposes (BS 1490:1988). UK; 1988.
   Google Scholar
• ASTM. Standard test methods for tensile testing of metallic materials (E8/E8M-16a). ASTM International; 2016.
   Google Scholar
• Bale CW, Bélisle E, Chartrand P, et al. Factsage thermochemical software and databases 2010–2016. Calphad. 2016;54:35–53. doi:10.1016/j.calphad.2016.05.002
   Web of Science ®Google Scholar
• Hu Z, Dong Z, Yin Z, et al. Solidification behavior, microstructure and silicon twinning of Al-10Si alloys with ytterbium addition. J Rare Earths. 2018;36:662–668. doi:10.1016/j.jre.2017.12.007
   Web of Science ®Google Scholar
• Zhang X, Shi C, Liu E, et al. Achieving high strength and high ductility in metal matrix composites reinforced with a discontinuous three-dimensional graphene-like network. Nanoscale. 2017;9:11929–11938. doi:10.1039/C6NR07335B
   PubMed Web of Science ®Google Scholar