Modeling pressure drop in curvature and reacceleration zones in bends during pneumatic conveying of fine powders

References

• Akilli, H., E. K. Levy, and B. Sahin. 2001. Gas-solid flow behavior in a horizontal pipe after a 90° vertical-to-horizontal elbow. Powder Technology 116 (1):43–52. doi: 10.1016/S0032-5910(00)00360-0.
   Web of Science ®Google Scholar
• Arastoopour, H., M. V. Modi, D. V. Punwani, and A. T. Talwalkar. 1979. Review of design equations for dilute phase gas-solids horizontal conveying systems for coal and related materials. Chicago, IL: Institute of Gas Technology.
   Google Scholar
• Bilirgen, H., and E. K. Levy. 2001. Mixing and dispersion of particle ropes in lean phase pneumatic conveying. Powder Technology 119 (2–3):134–52. doi: 10.1016/S0032-5910(00)00413-7.
   Web of Science ®Google Scholar
• Cai, L., S. Liu, X. Pan, X. Guiling, Y. Gaoyang, C. Xiaoping, and Z. Changsui. 2014. Comparison of pressure drops through different bends in dense-phase pneumatic conveying system at high pressure. Experimental Thermal and Fluid Science 57:11–9. doi: 10.1016/j.expthermflusci.2014.03.016.
   Web of Science ®Google Scholar
• Chunhui, H., C. Xianmei, W. Jianhao, N. Hongliang, X. Yupeng, Z. Haijun, X. Yuanquan, and S. Xianglin. 2012. Conveying characteristics and resistance characteristics in dense phase pneumatic conveying of rice husk and blendings of rice husk and coal at high pressure. Powder Technology 227:51–60. doi: 10.1016/j.powtec.2012.02.014.
   Web of Science ®Google Scholar
• Crowe, C. T. 2006. Multiphase flow handbook. 1st ed. Boca Raton, FL: CRC Press. doi: 10.1201/9781420040470.
   Google Scholar
• Chambers, A. J., and R. D. Marcus. 1986. Pneumatic conveying calculations. Second International Conference on Bulk Materials Storage, Handling and Transportation: 1986; Preprints of Papers, 49. Institution of Engineers, Australia.
   Google Scholar
• Hall, S. 2012. Rules of thumb for chemical engineers. 5th ed. Oxford: Butterworth-Heinemann. doi: 10.1016/C2010-0-65782-8.
   Google Scholar
• Hong, J., and Y. S. Shen. 1994. Flow characteristics of high density continuous conveying of solids. Engineering Chemistry and Metallurgy 15:122–8.
   Google Scholar
• Hinkle, B. L. 1953. Acceleration of particles and pressure drops encountered in horizontal pneumatic conveying. Atlanta, GA: Georgia Institute of Technology.
   Google Scholar
• Klinzing, G. E., C. A. Myler, A. Zaltash, and S. Dhodapkar. 1989. A simplified correlation for solids friction factor in horizontal conveying systems based on Yang’s unified theory. Powder Technology 58 (3):187–93. doi: 10.1016/0032-5910(89)80114-7.
   Web of Science ®Google Scholar
• Klinzing, G. E., N. D. Rohatgi, A. Zaltash, and C. A. Myler. 1987. Pneumatic transport—A review (generalised phase diagram approach to pneumatic transport). Powder Technology 51 (2):135–49. doi: 10.1016/0032-5910(87)80011-6.
   Web of Science ®Google Scholar
• Levy, A., and D. J. Mason. 1998. The effect of a bend on the particle cross-section concentration and segregation in pneumatic conveying systems. Powder Technology 98 (2):95–103. doi: 10.1016/S0032-5910(97)03385-8.
   Web of Science ®Google Scholar
• McGlinchey, D. 2009. Bulk solids handling. Hoboken, NJ: Wiley-Blackwell.
   Google Scholar
• Mallick, S. S. 2009. Modelling of fluidised dense-phase pneumatic conveying of powders. Wollongong: University of Wollongong.
   Google Scholar
• Maynard, E. 2006. Designing pneumatic conveying systems. Chemical Engineering Progress 102 (5):23–33.
   Web of Science ®Google Scholar
• Molerus, O. 1996. Overview: Pneumatic transport of solids. Powder Technology 88 (3):309–21. doi: 10.1016/S0032-5910(96)03136-1.
   Web of Science ®Google Scholar
• Pan, R., and P. W. Wypych. 1998. Dilute and dense phase pneumatic conveying of fly ash. Proceedings of the 6th International Conference on Bulk Materials Storage and Transportation, Wollongong, NSW, Australia, 183–189.
   Google Scholar
• Pan, R. 1992. Improving scale-up procedures for the design of pneumatic conveying systems. University of Wollongong Thesis Collections.
   Google Scholar
• Sharma, A., and S. S. Mallick. 2019. Modelling pressure drop in bends for pneumatic conveying of fine powders. Powder Technology 356:273–83. doi: 10.1016/j.powtec.2019.08.047.
   Web of Science ®Google Scholar
• Santo, N., D. Portnikov, I. Eshel, R. Taranto, and H. Kalman. 2018. Experimental study on particle steady state velocity distribution in horizontal dilute phase pneumatic conveying. Chemical Engineering Science 187:354–66. doi: 10.1016/j.ces.2018.04.058.
   Web of Science ®Google Scholar
• Setia, G., S. S. Mallick, R. Pan, and P. W. Wypych. 2016. Modeling solids friction factor for fluidised dense-phase pneumatic transport of powders using two layer flow theory. Powder Technology 294:80–92. doi: 10.1016/j.powtec.2016.02.006.
   Web of Science ®Google Scholar
• Sommerfeld, M., and L. Santiago. 2015. Parameters influencing dilute‐phase pneumatic conveying through pipe systems: A computational study by the Euler/Lagrange approach. The Canadian Journal of Chemical Engineering 93 (1):1–17. doi: 10.1002/cjce.22105.
   Web of Science ®Google Scholar
• Swamee, P. K., and A. K. Jain. 1976. Explicit equations for pipe flow problems. Journal of the Hydraulics Division 102 (5):657–64. doi: 10.1061/JYCEAJ.0004542.
   Web of Science ®Google Scholar
• Tripathi, N. M., A. Levy, and H. Kalman. 2018. Acceleration pressure drop analysis in horizontal dilute phase pneumatic conveying system. Powder Technology 327:43–56. doi: 10.1016/j.powtec.2017.12.045.
   Web of Science ®Google Scholar
• Venkatasubramanian, S., H. Tashiro, G. E. Klinzing, and K. Mykelbust. 2000. Solids flow behavior in bends: Assessing fine solids buildup. Powder Technology 113 (1–2):124–31. doi: 10.1016/S0032-5910(00)00217-5.
   Web of Science ®Google Scholar
• Wypych, P. W. 1999. Pneumatic conveying of powders over long distances and at large capacities. Powder Technology 104 (3):278–86. doi: 10.1016/S0032-5910(99)00105-9.
   Web of Science ®Google Scholar
• Westman, M. A., E. E. Michaelides, and F. M. Thomson. 1987. Pressure losses due to bends in pneumatic conveying. Journal of Pipelines 7 (1):15–20.
   Google Scholar
• Weber, M. 1981. Principles of hydraulic and pneumatic conveying in pipes. Bulk Solids Handling 1 (1):57–63.
   Google Scholar
• Yan, Y., B. Byrne, and J. Coulthard. 1994. Radiometric determination of dilute inhomogeneous solids loading in pneumatic conveying systems. Measurement Science and Technology 5 (2):110–9. doi: 10.1088/0957-0233/5/2/006.
   Web of Science ®Google Scholar