Modeling minimum transport boundary for pneumatic conveying of powders

References

• Alkassar, Y., V. K. Agarwal, N. Behera, M. G. Jones, and R. K. Pandey. 2019. Transient characteristics of fine powder flows within fluidized dense phase pneumatic conveying systems. Powder Technology 343:629–43. doi: 10.1016/j.powtec.2018.11.081.
   Web of Science ®Google Scholar
• ASTM Standard, D. 2018. 7481–09. Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders Using a Graduated Cylinder, West Conshohocken, PA, USA: ASTMInternational (www.astm.org).
   Google Scholar
• ASTM, C. 1998. 693–93. Standard Test Method for Density of Glass by Buoyancy, West Conshohocken, PA, USA: ASTMInternational (www.astm.org).
   Google Scholar
• Alkassar, Y., V. K. Agarwal, R. K. Pandey, and N. Behera. 2021. Analysis of dense phase pneumatic conveying of fly ash using CFD including particle size distribution. Particulate Science and Technology 39 (3):322–37. doi: 10.1080/02726351.2020.1727592.
   Web of Science ®Google Scholar
• Behera, N., Y. Alkassar, V. K. Agarwal, and R. K. Pandey. 2023. Fluidized dense phase pneumatic conveying: A review. Particulate Science and Technology 41 (2):277–96. doi: 10.1080/02726351.2022.2080619.
   Web of Science ®Google Scholar
• Cabrejos, F. J., and G. E. Klinzing. 1994. Pickup and saltation mechanisms of solid particles in horizontal pneumatic transport. Powder Technology 79 (2):173–86. doi: 10.1016/0032-5910(94)02815-X.
   Web of Science ®Google Scholar
• Chambers, A. J., and R. D. Marcus. 1986. January. Pneumatic conveying calculations. In Second International Conference on Bulk Materials Storage, Handling and Transportation: 1986; Preprints of Papers (pp. 49–52). Barton, ACT: Institution of Engineers, Australia. ISBN: 0858253070
   Google Scholar
• Kalman, H., A. Satran, D. Meir, and E. Rabinovich. 2005. Pickup (critical) velocity of particles. Powder Technology 160 (2):103–13. doi: 10.1016/j.powtec.2005.08.009.
   Web of Science ®Google Scholar
• Lumay, G., F. Boschini, K. Traina, S. Bontempi, J. C. Remy, R. Cloots, and N. Vandewalle. 2012. Measuring the flowing properties of powders and grains. Powder Technology 224:19–27. doi: 10.1016/j.powtec.2012.02.015.
   Web of Science ®Google Scholar
• Mallick, S. S. 2009. Modelling dense-phase pneumatic conveying of powders., Doctoral dissertation., University of Wollongong, Australia.
   Google Scholar
• Mallick, S. S., and P. W. Wypych. 2009. Minimum transport boundaries for pneumatic conveying of powders. Powder Technology 194 (3):181–6. doi: 10.1016/j.powtec.2009.04.003.
   Web of Science ®Google Scholar
• Mallick, S. S., P. W. Wypych, and R. Pan. 2011. Minimum transport boundaries for dense-phase pneumatic conveying of powders. Proceedings of Bulk Solids India, Mumbai.
   Google Scholar
• Martinussen, S. E. 1996. The influence of the physical characteristics of particulate materials on their conveyability in pneumatic transport systems., Doctoral dissertation., University of Greenwich, United Kingdom
   Google Scholar
• Mills, D. 2004. An investigation of the unstable region for dense phase conveying in sliding bed flow. Granular Matter 6 (2-3):173–7. doi: 10.1007/s10035-004-0162-1.
   Web of Science ®Google Scholar
• Pan, R. 1992. Improving scale-up procedures for the design of pneumatic conveying systems., Doctoral dissertation., University of Wollongong, Australia.
   Google Scholar
• Ratnayake, C. 2005. A comprehensive scaling up technique for pneumatic transport systems., Doctoral dissertation., The Norwegian University of Sceince and Technology, Norway.
   Google Scholar
• Rizk, F. 1982. Pneumatic transport in dilute and dense phase. Bulk Solids Handling 2 (2):235–41.
   Google Scholar
• Sharma, A. 2020a. An Investigation on Pressure Drop for Gas-Solids Flow through Bends., Doctoral dissertation., Thapar Institute of Engineering and Technology, India.
   Google Scholar
• Sharma, K. 2020b. Studies towards Development of Improved Modelling and Scale-Up Procedures for Dense-Phase Pneumatic Conveying of Fine Powders., Doctoral dissertation., Thapar Institute of Engineering and Technology, India.
   Google Scholar
• Schade, B. 1987. Zum bergang Sprung-Str hnenf rderung bei der horizontalen pneumatischen Feststo rderung., (Doctoral dissertation., University of Karlsruhe, Germany).
   Google Scholar
• Setia, G., S. S. Mallick, P. W. Wypych, and R. Pan. 2013. Validated scale-up procedure to predict blockage condition for fluidized dense-phase pneumatic conveying systems. Particuology 11 (6):657–63. doi: 10.1016/j.partic.2012.11.007.
   Web of Science ®Google Scholar
• Setia, G., S. S. Mallick, R. Pan, and P. W. Wypych. 2016. Modeling solids friction factor for fluidized dense-phase pneumatic transport of powders using two layer flow theory. Powder Technology 294:80–92. doi: 10.1016/j.powtec.2016.02.006.
   Web of Science ®Google Scholar
• Setia, G., and S. S. Mallick. 2016. Improving Scale-Up Procedures for Solids Friction and Minimum Transport Boundary for Fluidized Dense-Phase Pneumatic Conveying Systems., Doctoral dissertation., Thapar Institute of Engineering & Technology, India.
   Google Scholar
• J.s, Shijo, and N. Behera. 2017. Transient parameter analysis of pneumatic conveying of fine particles for predicting the change of mode of flow. Particuology 32:82–8. doi: 10.1016/j.partic.2016.07.004.
   Web of Science ®Google Scholar
• Weber, M. 1981. Principles of hydraulic and pneumatic conveying in pipes. Bulk Solids Handling 1 (1):57–63.
   Google Scholar
• Wypych, P. W., and P. C. Arnold. 1984. The use of powder and pipe properties in the prediction of dense phase pneumatic transport behaviour. Proceedings of the technical program, Pneumatech 2, Powder Advisory Centre, International Conference on Pneumatic Conveying Technology, University of Kent, England
   Google Scholar
• Wypych, P. W. 1989. Pneumatic conveying of bulk solids., Doctoral Dissertation., University of Wollongong, Australia.
   Google Scholar