Effect of feed-size segregation on energy consumption during jigging: A CFD-DEM study

References

• Ahmed, M. M. 2011. Optimization of a jigging process using statistical technique. International Journal of Coal Preparation and Utilization 31 (2):112–23. doi: 10.1080/19392699.2010.549383.
   Web of Science ®Google Scholar
• Alobaid, F., N. Baraki, and B. Epple. 2014. Investigation into improving the efficiency and accuracy of CFD/DEM simulations. Particuology 16:41–53. doi: 10.1016/j.partic.2013.11.004.
   Web of Science ®Google Scholar
• Asakura, K., M. Mizuno, M. Nagao, and S. Harada. 2007. Numerical simulation of particle motion in a jig separator. 5th Joint ASME/JSME Fluids Engineering Conference, San Diego, California USA, 1, 385–391. doi: 10.1115/FEDSM2007-37158.
   Google Scholar
• Beck, A. J. G, and P. N. Holtham. 1993. Computer simulation of particle stratification in a two-dimensional batch jig. Minerals Engineering 6 (5):523–32. doi: 10.1016/0892-6875(93)90179-Q.
   Web of Science ®Google Scholar
• Brosh, T., H. Kalman, and A. Levy. 2014. Accelerating CFD–DEM simulation of processes with wide particle size distributions. Particuology 12:113–21. doi: 10.1016/j.partic.2013.04.008.
   Web of Science ®Google Scholar
• Che, H., D. Werner, J. Seville, T. K. Wheldon, and K. Windows-Yule. 2023. Evaluation of coarse-grained CFD-DEM models with the validation of PEPT measurements. Particuology 82:48–63. doi: 10.1016/j.partic.2022.12.018.
   Web of Science ®Google Scholar
• Constant, M., N. Coppin, F. Dubois, R. Artoni, J. Lambrechts, and V. Legat. 2021. Numerical investigation of the density sorting of grains using water jigging. Powder Technology 393:705–21. doi: 10.1016/j.powtec.2021.07.036.
   Web of Science ®Google Scholar
• Crespo, E. F. 2016. Modeling segregation and dispersion in jigging beds in terms of the bed porosity distribution. Minerals Engineering 85:38–48. doi: 10.1016/j.mineng.2015.10.012.
   Web of Science ®Google Scholar
• Deniz, V. 2021. Prediction of barite recovery and grade by multiple linear regression (MLR) analysis in concentrating of barite tailings by using multi-gravity separator (MGS). Particulate Science and Technology 39 (6):748–56. doi: 10.1080/02726351.2020.1815254.
   Web of Science ®Google Scholar
• Di Felice, R. 1994. The voidage function for fluid–particle interaction systems. International Journal of Multiphase Flow 20 (1):153–9. doi: 10.1016/0301-9322(94)90011-6.
   Web of Science ®Google Scholar
• Dong, K. J., S. B. Kuang, A. Vince, T. Hughes, and A. B. Yu. 2010. Numerical simulation of the in-line pressure jig unit in coal preparation. Minerals Engineering 23 (4):301–12. doi: 10.1016/j.mineng.2009.10.009.
   Web of Science ®Google Scholar
• ESSS Rocky. 2021. Release 4.5.2, User Manual, ESSS Rocky DEM, S.R.L
   Google Scholar
• Fatahi, M. R., and A. Farzanegan. 2017. DEM simulation of laboratory Knelson concentrator to study the effects of feed properties and operating parameters. Advanced Powder Technology 28 (6):1443–58. doi: 10.1016/j.apt.2017.03.011.
   Web of Science ®Google Scholar
• Izerdem, D., and S. L. Ergun. 2022. Investigation of the effects of particle size on the performance of classical gravity concentration equipment. Mineral Processing and Extractive Metallurgy Review. doi: 10.1080/08827508.2022.2132943.
   Web of Science ®Google Scholar
• Marchelli, F., C. Moliner, B. Bosio, and E. Arato. 2019. A CFD–DEM study of the behaviour of single-solid and binary mixtures in a pyramidal spouted bed. Particuology 42:79–91. doi: 10.1016/j.partic.2018.03.017.
   Web of Science ®Google Scholar
• Mayer, F. W. 1964. Fundamentals of a potential theory of the jigging process. Proc. 7th International Mineral Processing Congress, 7, 75–97.
   Google Scholar
• Mishra, B. K., and S. P. Mehrotra. 1998. Modelling of particle stratification in jigs by the discrete element method. Minerals Engineering 11 (6):511–22. doi: 10.1016/S0892-6875(98)00033-8.
   Web of Science ®Google Scholar
• Mishra, B. K., and S. P. Mehrotra. 2001. A jig model based on the discrete element method and its experimental validation. International Journal of Mineral Processing 63 (4):177–89. doi: 10.1016/S0301-7516(01)00053-9.
   Google Scholar
• Mukherjee, A. K., and B. K. Mishra. 2006. An integral assessment of the role of critical process parameters on jigging. International Journal of Mineral Processing 81 (3):187–200. doi: 10.1016/j.minpro.2006.08.005.
   Web of Science ®Google Scholar
• Mukherjee, A. K., and B. K. Mishra. 2007. Experimental and simulation studies on the role of fluid velocity during particle separation in a liquid–solid fluidized bed. International Journal of Mineral Processing 82 (4):211–21. doi: 10.1016/j.minpro.2006.11.006.
   Web of Science ®Google Scholar
• Napolitano, E. S., A. Di Renzo, and F. P. Di Maio. 2022. Coarse-grain DEM-CFD modelling of dense particle flow in Gas–Solid cyclone. Separation and Purification Technology 287:120591. doi: 10.1016/j.seppur.2022.120591.
   Web of Science ®Google Scholar
• Panda, L., A. K. Sahoo, A. Tripathy, S. K. Biswal, and A. K. Sahu. 2012. Application of artificial neural network to study the performance of jig for beneficiation of non-coking coal. Fuel 97:151–6. doi: 10.1016/j.fuel.2012.02.018.
   Web of Science ®Google Scholar
• Pryor, E. J. 1965. Mineral processing. Elsevier Publishing Co. Ltd. Amsterdam – London – New York, Chapter 13: 304.
   Google Scholar
• Razavi, F., A. Komrakova, and C. F. Lange. 2021. CFD–DEM simulation of sand-retention mechanisms in slurry flow. Energies 14 (13):3797. doi: 10.3390/en14133797.
   Web of Science ®Google Scholar
• Rong, R. X., and G. J. Lyman. 1992. The effect of jigging time and air cycle on bed stratification in a pilot scale Baum jig. Fuel 71 (1):115–23. doi: 10.1016/0016-2361(92)90201-X.
   Web of Science ®Google Scholar
• Shuai, L., Y. Runquan, W. Caili, S. Yang, and W. Huaifa. 2022. Simulation of the solid particles behavior in 3D stirred tank using CFD-DEM coupling approach. Particulate Science and Technology 40 (8):911–21. doi: 10.1080/02726351.2021.2025179.
   Web of Science ®Google Scholar
• Solnordal, C. B., T. Hughes, A. H. Gray, and P. M. Schwarz. 2009. CFD modelling of a novel gravity separation device. Seventh International Conference on CFD in the Minerals and Process Industries, CSIRO, Melbourne, Australia.
   Google Scholar
• Srinivasan, R., B. K. Mishra, and S. P. Mehrotra. 1999. Simulation of particle stratification in jigs. Coal Preparation 20 (1-2):55–70. doi: 10.1080/07349349908945592.
   Google Scholar
• Tavares, L. M. 1999. Monte Carlo simulations on the potential energy theory of jigging. Coal Preparation 20 (1-2):71–83. doi: 10.1080/07349349908945593.
   Google Scholar
• Tavares, L. M., and R. P. King. 1995. A useful model for the calculation of the performance of batch and continuous jigs. Coal Preparation 15 (3-4):99–128. doi: 10.1080/07349349508905291.
   Google Scholar
• Viduka, S. M., Y. Q. Feng, K. Hapgood, and M. P. Schwarz. 2013a. CFD-DEM investigation of particle separations using a sinusoidal jigging profile. Advanced Powder Technology 24 (2):473–81. doi: 10.1016/j.apt.2012.11.012.
   Web of Science ®Google Scholar
• Viduka, S. M., Y. Q. Feng, K. Hapgood, and M. P. Schwarz. 2013b. Discrete particle simulation of solid separation in a jigging device. International Journal of Mineral Processing 123:108–19. doi: 10.1016/j.minpro.2013.05.001.
   Google Scholar
• Xia, Y. K. 2007. Applications of computational fluid dynamics (CFD) tools for gravity concentrators in coal preparation. Chemical Product and Process Modeling 2 (1):11. doi: 10.2202/1934-2659.1028.
   Google Scholar
• Xia, Y. K., and F. F. Peng. 2007. Numerical simulation of behavior of fine coal in oscillating flows. Minerals Engineering 20 (2):113–23. doi: 10.1016/j.mineng.2006.06.004.
   Web of Science ®Google Scholar
• Xia, Y. K., F. F. Peng, and E. Wolfe. 2007. CFD simulation of fine coal segregation and stratification in jigs. International Journal of Mineral Processing 82 (3):164–76. doi: 10.1016/j.minpro.2006.10.004.
   Google Scholar
• Ye, G., Q. Liu, L. Ma, and X. Dong. 2023. CFD-DEM investigation of fluid and particle motion behaviors in initial stage of spiral separation process at low solids concentration. Mineral Processing and Extractive Metallurgy Review 44 (7):475–80. doi: 10.1080/08827508.2022.2084736.
   Web of Science ®Google Scholar
• Wills, B. A., and J. Finch. 2015. Wills’ Mineral Processing Technology: An introduction to the practical aspects of ore treatment and mineral recovery. 8th ed. Butterworth-Heinemann, Oxford. doi: 10.1016/C2010-0-65478-2.
   Google Scholar