References
- Roy D, Pistorius P, Fruehan R. Effect of silicon on the desulfurization of Al-killed steels: part I. mathematical model. Metall Mater Trans B. 2013;44:1086–1094.
- Lou W, Zhu M. Numerical simulation of desulfurization behavior in gas-stirred systems based on computation fluid dynamics–simultaneous reaction model (CFD–SRM) coupled model. Metall Mater Trans B. 2014;45:1706–1722.
- Cao Q, Nastac L. Mathematical investigation of fluid flow, mass transfer, and slag-steel interfacial behavior in gas-stirred ladles. Metall Mater Trans B. 2018;49:1388–1404.
- Wang Q, He Z, Li G, et al. Numerical investigation of desulfurization behavior in electroslag remelting process. Int J Heat Mass Transfer. 2017;104:943–951.
- Conejo A, Lara F, Macias-Hernández M, et al. Kinetic model of steel refining in a ladle furnace. Steel Res Int. 2007;78:141–150.
- Fincham C, Richardson F. The behaviour of sulphur in silicate and aluminate melts. Proceed R Soc Lond A Math Phys Sci. 1954;223:40–62.
- Sosinsky D., Sommerville I. The composition and temperature dependence of the sulfide capacity of metallurgical slags. Metall Trans B. 1986;17:331–337.
- Young R, Duffy J, Hassall G, et al. Use of optical basicity concept for determining phosphorus and sulphur slag-metal partitions. Ironmak Steelmak. 1992;19:201–219.
- N MM, S DU, Seetharaman S. Sulphide capacities of “FeO”-SiO2, CaO-“FeO”, and “FeO”-MnO slags. ISIJ Int. 1999;39:657–663.
- Taniguchi Y, Sano N, Seetharaman S. Sulphide capacities of CaO–Al2O3–SiO2–MgO–MnO slags in the temperature range 1673–1773K. ISIJ Int. 2009;49:156–163.
- Park J. Structure–property correlations of CaO–SiO2–MnO slag derived from Raman spectroscopy. ISIJ Int. 2012;52:1627–1636.
- Shi C, Yang X, Jiao J, et al. A sulphide capacity prediction model of CaO–SiO2–MgO–Al2O3 ironmaking slags based on the ion and molecule coexistence theory. ISIJ Int. 2010;50:1362–1372.
- Inoue R, Suito H. Sulfur partitions between carbon-saturated iron melt and Na2O-SiO2 slags. Trans Iron Steel Inst Japan. 1982;22:514–523.
- Chan A, Fruehan R. The sulfur partition ratio and the sulfide capacity of Na2O-SiO2 slags at 1200 C. Metall Trans B. 1986;17:491–496.
- Andersson M, Jönsson P, Nzotta M. Application of the sulphide capacity concept on high-basicity ladle slags used in bearing-steel production. ISIJ Int. 1999;39:1140–1149.
- Jeong T, Cho J, Heo J, et al. Desulfurization behavior of Si-killed 316L stainless steel melt by CaO-SiO2-CaF2-Al2O3-MgO slag. J Mater Res Technol. 2022;18:2250–2260.
- Jonsson L, Sichen D, Jönsson P. A new approach to model sulphur refining in a gas-stirred ladle–a coupled CFD and thermodynamic model. ISIJ Int. 1998;38:260–267.
- Andersson M, Jonsson L, Jönsson P. A thermodynamic and kinetic model of reoxidation and desulphurisation in the ladle furnace. ISIJ Int. 2000;40:1080–1088.
- Andersson M, Hallberg M, Jonsson L, et al. Slag-metal reactions during ladle treatment with focus on desulphurisation. Ironmak Steelmak. 2002;29:224–232.
- Singh U, Anapagaddi R, Mangal S, et al. Multiphase modeling of bottom-stirred ladle for prediction of slag–steel interface and estimation of desulfurization behavior. Metall Mater Trans B. 2016;47:1804–1816.
- Cao Q. Mathematical modeling of the fluid flow, multicomponent slag-metal reactions and desulfurization efficiency in gas-stirred ladles [PhD thesis]. Tuscaloosa (AL): The University of Alabama; 2018.
- Cao Q, Nastac L, Pitts-Baggett A, et al. Numerical investigation of desulfurization kinetics in gas-stirred ladles by a quick modeling analysis approach. Metall Mater Trans B. 2018;49:988–1002.
- Oliveira Pezzin R, Berger A, Grillo F, et al. Analysis of the influence of the solid and liquid phases on steel desulfurization with slags from the CaO–Al2O3 systems using computational thermodynamics. J Mater Res Technol. 2020;9:838–846.
- Moosavi-Khoonsari E, Van Ende M, Jung I. Kinetic simulation of hot metal pretreatment: desulfurization using powder injection. Metall Mater Trans B. 2022;53:981–998.
- Jia S, He Z, Ouyang D, et al. Powder injection effect on Hot metal desulfurization behavior in the Kanbara reactor: a transient 3D coupled numerical model. ISIJ Int. 2022;62:449–456.
- Cao Q, Nastac L. Mathematical modeling of the multiphase flow and mixing phenomena in a gas-stirred ladle: the effect of bubble expansion. JOM. 2018;70:2071–2081.
- Andersson M, Jönsson P, Hallberg M. Optimisation of ladle slag composition by application of sulphide capacity model. Ironmak Steelmak. 2000;27(27):286–293.
- Vuolio T, Visuri V, Paananen T, et al. Identification of rate, extent, and mechanisms of Hot metal resulfurization with CaO-SiO 2-Na 2 O slag systems. Metall Mater Trans B. 2019;50:1791–1807.
- Ghosh D, Krishnamurthy V, Sankaranarayanan S. Application of optical basicity to viscosity of high alumina blast furnace slags. J Min Metall Sect B. 2010;46:41–49.
- Mori T. On the phosphorus distribution between slag and steel. Bull Jap Inst Metals. 1984;23:354–361.
- Krishna Y, Sowmya T, Sankaranarayanan S. Application of optical basicity parameter to foaming of slags. Metall Ital. 2008;10:51–54.
- Engh T. Principles of metal refining. Oxford: Oxford University Press; 1992. p. 62–63.
- Lamont J, Scott D. An eddy cell model of mass transfer into the surface of a turbulent liquid. AIChE J. 1970;16:513–519.