Effect of magnetic alternate stirring on solidification structure of the round billet

References

• Feng Y, Ji L, Chen H, et al. Research progress and prospect of key technologies for high-strain line pipe steel and pipes. Nat Gas Ind B. 2021;8(2):146–153. doi:10.1016/j.ngib.2020.09.015
   Google Scholar
• Gao X, Zhang D, Lu Y, et al. CO2 corrosion behavior of high-strength and toughness V140 steel for oil country tubular goods. J Mater Eng Perform. 2020;29:8451–8460. doi:10.1007/s11665-020-05306-7
   Web of Science ®Google Scholar
• Guo F, Wang X, Wang J, et al. The significance of central segregation of continuously cast billet on banded microstructure and mechanical properties of section steel. Metals. 2020;10(1):76. doi:10.3390/met10010076
   Web of Science ®Google Scholar
• Wang Y, Chen Y, Yu W. Effect of Cr/Mn segregation on pearlite-martensite banded structure of high carbon bearing steel. Int J Minerals Metall Mater. 2021;28(4):665–675. doi:10.1007/s12613-020-2035-y
   Web of Science ®Google Scholar
• Kholodnyi AA, Kuznechenko YS, Matrosov YI, et al. Improvement of low-alloy pipe steel sulfide stress cracking resistance. Metallurgist. 2019;63(3):376–387. doi:10.1007/s11015-019-00833-8
   Web of Science ®Google Scholar
• Ji Y, Lan P, Geng H, et al. Behavior of spot segregation in continuously cast blooms and the resulting segregated band in oil pipe steels. Steel Res Int. 2018;89(3):1700331. doi:10.1002/srin.201700331
   Web of Science ®Google Scholar
• An H, Bao Y, Wang M, et al. Improvement of centre segregation in continuous casting bloom and the resulting carbide homogeneity in bearing steel GCr15. Ironmak Steelmak. 2019;46(9):896–905. doi:10.1080/03019233.2019.1604614
   Web of Science ®Google Scholar
• Ji Y, Li Y, Li S, et al. Central segregation of high-carbon steel billet and its heredity to the hot-rolled wire rods. 7th International Symposium on High-Temperature Metallurgical Processing, New Jersey; 2016; p. 625–633.
   Google Scholar
• Zhang M, Bao Y, Zhao L, et al. Improvement of carbon segregation in cast bloom and heredity in hot-rolled bar. Metall Res Technol. 2021;118(6):610. doi:10.1051/metal/2021072
   Web of Science ®Google Scholar
• Jiang D, Wang R, Zhu L, et al. Thermal and numerical simulation of mould electromagnetic stirring of GCr15 bearing steel. Mater Sci Technol. 2019;35(18):2173–2180. doi:10.1080/02670836.2019.1664080
   Web of Science ®Google Scholar
• Yang B, Deng A, Li Y, et al. Numerical simulation of flow and solidification in continuous casting process with mold electromagnetic stirring. J Iron Steel Res Int. 2019;26(3):219–229. doi:10.1007/s42243-018-0162-8
   Web of Science ®Google Scholar
• Liu H, Chen Y, Hao Q, et al. Numerical simulation of coupled fluid flow and solidification in a curved round bloom continuous caster with a combined rotary electromagnetic stirring. Ironmak Steelmak. 2022;49(5):506–521. doi:10.1080/03019233.2021.2022871
   Web of Science ®Google Scholar
• Jiang D, Wang R, Zhang Q, et al. Effect of final electromagnetic stirring on solidification microstructure of GCr15 bearing steel in simulated continuous casting. J Iron Steel Res Int. 2020;27(2):141–147. doi:10.1007/s42243-019-00257-3
   Web of Science ®Google Scholar
• Nick AS, Vynnycky M. On longitudinal electromagnetic stirring in the continuous casting of steel blooms. J Eng Math. 2020;120(1):129–151. doi:10.1007/s10665-019-10035-5
   Web of Science ®Google Scholar
• Sun H, Li L, Ye D, et al. On the alternate stirring mode of F-EMS for bloom continuous castings. Metall Mater Trans B-Process Metall Mater Process Sci. 2018;49(4):1909–1918. doi:10.1007/s11663-018-1287-7
   Web of Science ®Google Scholar
• Yin Y, Zhang J, Lei S, et al. Numerical study on the capture of large inclusion in slab continuous casting with the effect of in-mold electromagnetic stirring. ISIJ Int. 2018;57(12):2165–2174. doi:10.2355/isijinternational.ISIJINT-2017-347
   Web of Science ®Google Scholar
• Huo Y, Zhao L, An H, et al. Model prediction of the effect of in-mold electromagnetic stirring on negative segregation under bloom surface. Int J Minerals. Metall Mater. 2020;27(3):319–327. doi:10.1007/s12613-019-1906-6
   Web of Science ®Google Scholar
• Wang P, Xiao H, Shen H, et al. Effect of mold electromagnetic stirring on the gear steel solidification behavior of its large-sized round casting. J Mech Eng. 2021;57(2):105–111. doi:10.3901/JME.2021.02.105
   Google Scholar
• Li S, Lan P, Tang H, et al. Study on the electromagnetic field, fluid flow, and solidification in a bloom continuous casting mold by numerical simulation. Steel Res Int. 2018;89(12):1800071. doi:10.1002/srin.201800071
   Web of Science ®Google Scholar
• Wu C, Wang Q, Li D, et al. Macrosegregation under new flow pattern and temperature distribution induced by electromagnetic swirling flow in nozzle during continuous casting of square billet. J Mater Res Technol. 2020;9(3):5630–5639. doi:10.1016/j.jmrt.2020.03.088
   Google Scholar
• Zeng J, Chen W, Yang Y, et al. Effect of permanent magnet stirring on internal quality of steel. Ironmak Steelmak. 2017;45(6):576–583. doi:10.1080/03019233.2017.1303921
   Web of Science ®Google Scholar
• Zeng J, Chen W, Yang Y, et al. A review of permanent magnet stirring during metal solidification. Metall Mater Trans B. 2017;48:3083–3100. doi:10.1007/s11663-017-1077-7
   Web of Science ®Google Scholar
• Zhang L, Xu C, Zhang J, et al. The simulation and optimization of an electromagnetic field in a vertical continuous casting mold for a large bloom. Metals. 2020;10(4):516. doi:10.3390/met10040516
   Web of Science ®Google Scholar
• Liu G, Lu H, Li B, et al. Influence of M-EMS on fluid and initial solidification in slab continuous casting. Materials. 2021;14(13):3681. doi:10.3390/ma14133681
   PubMed Web of Science ®Google Scholar
• An H, Bao Y, Wang M, et al. Effects of electromagnetic stirring on fluid flow and temperature distribution in billet continuous casting mould and solidification structure of 55SiCr. Metall Res Technol. 2018;115(1):103. doi:10.1051/metal/2017075
   Web of Science ®Google Scholar
• Siqueira CA, Cheung N, Carcia A. Solidification thermal parameters affecting the columnar-to-equiaxed transition. Metall Mater Trans A. 2002;33(7):2107–2118. doi:10.1007/s11661-002-0042-4
   Web of Science ®Google Scholar
• Lijima Y, Kakehi K. Effect of Pb on the mechanical properties of Inconel 718. J Jpn Inst Metals Mater. 2014;78(5):201–204. doi:10.2320/jinstmet.J2013089
   Web of Science ®Google Scholar
• Satish Kumar D, Sambandam M, Bhat U. Development of an industrial ferritic rolling process for IF grade steel. Ironmak Steelmak. 2020;47(6):632–639. doi:10.1080/03019233.2020.1793290
   Web of Science ®Google Scholar
• Zhang Z, Li H, Zhou L, et al. As-cast spot segregation of gear steel and its evolution in the rolled products. Acta Metall Sinica. 2021;57(10):1281–1290.
   Web of Science ®Google Scholar
• Geng H, Zhang Z, Tang H, et al. Study on segregation and Nb-bearing precipitates of high-strength oil well casing steel. J Iron Steel Res. 2019;31(4):387–393.
   Google Scholar