References
- Speicher M, Hueggenberg D, Klenk A, et al. Materials for advanced Ultra‐supercritical fossil‐Fuel power plants: materials properties, microstructure, and component behaviour. Energy Technol. 2016;4(1):187–192. doi: 10.1002/ente.201500311
- Di Gianfrancesco A, editor. Materials for ultra-supercritical and advanced ultra-supercritical power plants. woodhead Publishing; 2016. p. 469–510.
- Zhang S, Takahashi Y (2014). Evaluation of high temperature strength of a Ni-base alloy 740H for advanced ultra-supercritical power plant. In Advances in Materials Technology for Fossil Power Plants: Proceedings from the Seventh International Conference, October 22-25, 2013 Waikoloa, Hawaii, USA (p. 242). ASM International.
- Tokairin T, Yamada K, Kishikawa K, et al. Verification of long-term creep rupture properties and microstructure stability of Ni based alloy 45Ni-24Fe-23Cr-7W-Ti parent metal and weldment. Mater High Temp. 2022;39(6):1–12. doi: 10.1080/09603409.2022.2045100
- Klenk A, Speicher M, Maile K. Weld Behavior of martensitic steels and Ni-based alloys for high temperature components. Procedia Eng. 2013;55:414–420. doi: 10.1016/j.proeng.2013.03.273
- Merda A, Golański G, Urbańczyk P, et al. Microstructure and mechanical properties of a similar T24 steel welded joint after service. Prace Instytutu Metalurgii Żelaza. 2018;70(2):37–41. doi: 10.32730/imz.0137-9941.18.2.04
- Veerababu J, Goyal S, Sandhya R, et al. Low cycle fatigue behaviour of grade 92 steel weld joints. Int J Fatigue. 2017;105:60–70. doi: 10.1016/j.ijfatigue.2017.08.013
- Knezevic V, Schneider A, Landier C. Creep behaviour of thick-wall alloy 617 seamless pipes for 700 °C power plant technology. Procedia Eng. 2013;55:240–245. doi: 10.1016/j.proeng.2013.03.249
- Singh RK, Sahu JK, Tarafder S. Strain rate effect on cyclic deformation behaviour of advanced ultra-supercritical boiler grade wrought Ni-based superalloy IN740H at 760 °C. Mater Sci Eng A. 2016;658:272–279. doi: 10.1016/j.msea.2016.02.007
- Shingledecker JP, Evans ND. Creep-rupture performance of 0.07 C–23Cr–45Ni–6W–Ti, Nb austenitic alloy (HR6W) tubes. Int J Pres Ves Pip. 2010;87(6):345–350. doi: 10.1016/j.ijpvp.2010.03.011
- Klöwer J, Husemann RU, Bader M. Development of nickel alloys based on alloy 617 for components in 700° C power plants. Procedia Eng. 2013;55:226–231. doi: 10.1016/j.proeng.2013.03.247
- Jena PSM, Singh RK, Mahanta L, et al. Low cycle fatigue behaviour of nickel base superalloy in 740H at 760° C: influence of fireside corrosion atmosphere. Int J Fatigue. 2018;116:623–633. doi: 10.1016/j.ijfatigue.2018.07.018
- Dewa RT, Kim SJ, Kim WG, et al. Effect of strain range on the low cycle fatigue in alloy 617 at high temperature. Metals. 2017;7(2):54. doi: 10.3390/met7020054
- Noguchi Y, Okada H, Semba H, et al. Isothermal, thermo-mechanical and bithermal fatigue life of Ni base alloy HR6W for piping in 700 C USC power plants. Procedia Eng. 2011;10:1127–1132. doi: 10.1016/j.proeng.2011.04.186
- Zieliński A, Dziuba-Kałuża M, Dobrzański J, et al. Evaluation of creep strength of heterogeneous welded joint in HR6W alloy and Sanicro 25 steel. Arch Metall Mater. 2017;62(4):2057–2064. doi: 10.1515/amm-2017-0305
- Junak G, Marek A, Paduchowicz M. Impact of temperature on low-cycle fatigue Characteristics of the HR6W alloy. Materials. 2021;14(22):6741. doi: 10.3390/ma14226741
- Samuel EI, Choudhary BK, Palaparti DR, et al. Creep deformation and rupture behaviour of P92 steel at 923 K. Procedia Eng. 2013;55:64–69. doi: 10.1016/j.proeng.2013.03.220
- Pańcikiewicz K. Structure and properties of welded joints of 7CrMoVTiB10-10 (T24) steel. Adv Mater Sci. 2018;18(1):37. doi: 10.1515/adms-2017-0026
- VdTÜV-Blatt 533 (VdTÜV material data sheet 533), Dec. 2013
- VdTÜV-Blatt 552 (VdTÜV material data sheet 522), Sep. 2009
- VdTÜV-Blatt 559 (VdTÜV material data sheet 529), Sep. 2009
- VdTÜV-Blatt 485 (VdTÜV material data sheet 485), Dec. 2009
- Special metals. Techl Bulletins Nimonic-Alloy 26. 2004.
- Special metals. Tech Bulletins Inconel-Alloy 740H. 2014.
- Arbeitsgemeinschaft für warmfeste Stähle, Arbeitsgemeinschaft für Hochtemperaturwerkstoffe: Richtlinie für die Untersuchungen in den Arbeitsgemeinschaften, 11.2003
- ECCC. Creep data validation and assessment procedures, issue 7. ECCC Mana Comm. 2014;3:92.
- Schubert J, Klenk A, Maile K (2005, September). Determination of weld strength factors for the creep rupture strength of welded joints. In International Conference on Creep and Fracture in High Temperature Components–Design and Life Assessment Issues.
- McCoy S, Personal communication, June 26, 2018
- Shingledecker JP. Metallurgical effects on long-term creep-rupture in a new nickel-based alloy [PhD diss.]. University of Tennessee; 2012.
- Manson SS, Halford GR. Fatigue and durability of metals at high temperatures. ASM International; 2009.
- Krojer S, Sheng S, roos r, et al. Mechanical behaviour of dissimilar welds for steam turbine rotors with high application temperature. In turbo expo: power for land, sea, and air (vol. 45585, p. V01BT27A043). American Society of Mechanical Engineers, June 2014.
- Maier G, Riedel H, Somsen C. Cyclic deformation and lifetime of alloy 617B during isothermal low cycle fatigue. Int J Fatigue. 2013;55:126–135. doi: 10.1016/j.ijfatigue.2013.06.001
- Rao CV, Srinivas NS, Sastry GVS, et al. Low cycle fatigue, deformation and fracture behaviour of inconel 617 alloy. Mater Sci Eng A. 2019;765:138286. doi: 10.1016/j.msea.2019.138286