Experimental investigations on a model of a power plant flange under steady state and transient load

References

• Deutsches Institut für Normung e. V. (DIN): Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation; German version EN 1591-1:2013. Berlin: Beuth Verlag GmbH; 2014.
   Google Scholar
• Verband der TÜV e.V.: AD 2000-Merkblatt B 8: Berechnung von Druckbehältern: Flansche. in German. Berlin: Beuth Verlag GmbH; 2017.
   Google Scholar
• The association of German engineers (VDI): VDI 2230 Part 1 systematic calculation of high duty bolted joints. in German. Berlin: Beuth Verlag GmbH; 2003.
   Google Scholar
• The association of German engineers (VDI): VDI 2230 Part 2 systematic calculation of high duty bolted joints. in German. Berlin: Beuth Verlag GmbH; 2011.
   Google Scholar
• Verband der TÜV e.V.: AD 2000-Merkblatt B 7: Berechnung von Druckbehältern: Schrauben. in German. Berlin: Beuth Verlag GmbH; 2015.
   Google Scholar
• The American society of mechanical engineers (ASME): 2021 ASME Boiler & Pressure Vessel Code (BPVC) Section VIII-Rules for Construction of Pressure Vessels Division 1/2. New York, NY: The American Society of Mechanical Engineers; 2021.
   Google Scholar
• The American society of mechanical engineers (ASME): ASME B16.5 pipe flanges and flanged fittings: NPS 1/2 through NPS 24 metric/inch standard, 2020.
   Google Scholar
• The American society of mechanical engineers (ASME): ASME B31.1 power piping, 2022
   Google Scholar
• The American society of mechanical engineers (ASME): ASME B16.34 valves – flanged, threaded and welding end, 2020
   Google Scholar
• Deutsches Institut für Normung e. V.langes and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections; German version EN 13555:2021. Berlin: Beuth Verlag GmbH; 2021.
   Google Scholar
• ASME standards technology, LLC: bolted flanged connections in elevated temp. service. STP-PT-036 report, New York, NY, USA, 2010
   Google Scholar
• Maile K, Klenk A: Numerical analysis of high temperature pipe flanges. Proceedings of the ASME 1999 PVP Conference, v.382, Analysis of Bolted Joints, pp. 153–160, Boston, MA, USA, 1999
   Google Scholar
• Purper H: Experimentelle und numerische Untersuchung des Relaxationsverhaltens von Rohrflanschverbindungen. Dissertation Universität Stuttgart, 2002 (in German)
   Google Scholar
• GengenbachT, Klenk A, Roos E. Relaxation behaviour of flanged joints consisting of 9 % chromium steels. International Symposium on Advanced Materials, Islamabad, 2003
   Google Scholar
• Gengenbach T: Relaxationsverhalten von Rohrflanschen aus 9 % Chrom-Stahl. Dissertation Universität Stuttgart, 2003 (in German)
   Google Scholar
• Leibing B, Hahn P, Klenk A, et al.: Optimized description of the relaxation behavior of bolted flange connections under alternating, near-service loads. Final report of the AiF project No. 17146 N, MPA Stuttgart/IfW Darmstadt, 2016 (in German)
   Google Scholar
• Leibing B, Hahn P, Klenk A. Component testing and Numerical calculation of a bolted high temperature power plant pipe flange connection under complex, near-service loads. Proceedings of the ASME PVP 2017 Conference; Waikoloa, HI, USA. 2017. p. PVP2017–65758
   Google Scholar
• Leibing B. Untersuchung des Relaxationsverhaltens einer warmgehenden Rohrflansch-verbindung unter anisothermen Beanspruchungen [Dissertation]. in German: Stuttgart: University of Stuttgart; 2019.
   Google Scholar
• Kettler K, Klenk A, Khan M, et al.: Outage concepts for heavy-duty flange joints and bolted joints under flexible service operation. Final report of the AiF project No. 20088 N, MPA Stuttgart/IfW Darmstadt, 2022 (in German)
   Google Scholar
• Schmidt K, Klenk A. Marcko 700: Werkstoffqualifizierung für das 700/720 °C-Kraftwerk. Abschlussbericht AVIF A215. in German: Stuttgart: MPA Stuttgart; 2010.
   Google Scholar
• Berger C, Scholz A, Schwienheer M: Erarbeitung und langzeitige Absicherung von Auslegungsdaten für 600 bis 625/700 °C-Dampfturbinen, Teilprojekt,Erweiterte Betrachtung des Kriech-, Dehnwechsel- und Kerbfestigkeitsverhaltens. Abschlussbericht, Förderkennzeichen 0327053A, Institut für Werkstoffkunde Fachgebiet Werkstoffkunde, 2010 (in German)
   Google Scholar
• Staubli M, Kern T U, Mayer K H, et al. The European efforts in development of new high temperature casing materials - COST 536. In Lecomte-Beckers J, Carton M, Schubert F, Ennis P J, editors. Materials for Advanced Power Engineering, Proceedings of the 8th Liège Conference Part II, Schriften des Forschungszentrums Jülich, Reihe Energietechnik, Jülich. Forschungszentrum Jülich GmbH; 2006. p. 871–891.
   Google Scholar
• Löser K: Mechanische Langzeiteigenschaften von Nickelbasislegierungen für Dampfturbinen-verschraubungen. Dissertation TH Darmstadt, Fortschritt-Berichte VDI, Reihe 5 Nr. 255, VDI-Verlag GmbH, Düsseldorf1992 (in German)
   Google Scholar