References
- Ejaz M (2019). Creep Life Prediction of New and Service Exposed 0.5Cr-0.5Mo-0.25V Steel Pipework, PhD Thesis, Imperial College London, London.
- ASTM Standard E139-11 (2018). Standard test methods for conducting creep, creep rupture, and stress rupture tests of metallic materials. ASTM International 2018.
- Norton FH. The creep of steels at high temperatures. McGraw-Hill. 1929.
- Jones MD. (2021) Advancements in the Data Analysis Methodology for Creep Crack Growth Tests on Type 316H Stainless Steel, PhD Thesis, Imperial College London, London.
- Davies CM, Dean DW, Nikbin KM, “The influence of compressive plastic pre-strain on the creep deformation and damage behaviour of 316H stainless steel,” Proceedings of the International Conference on Engineering Structural Integrity Assessment, FESI Publishing, Manchester, UK. 2009.
- Mehmanparast A, Davies CM, Webster GA, et al. Creep crack growth rate prediction in 316H steel using stress dependent ductility. Mater High Temp. 2014;31(1):84–94. doi: 10.1179/0960340913Z.00000000011
- Whittaker MT, Evans M, Wilshire B. Long-term creep data prediction for type 316H stainless steel. Mater Sci Eng. 2012;552:145–150. doi: 10.1016/j.msea.2012.05.023
- Mehmanparast A, Davies CM, Dean DW, et al. Effects of plastic pre-straining level on the creep deformation, crack initiation and growth behaviour of 316H stainless steel. Int J Pres Ves Pip. 2016;141:1–10. doi: 10.1016/j.ijpvp.2016.03.013
- EDF Energy. Private communication.
- SJB Engineering. High Temperature Strain Gauges. SJB Engineering Available: https://www.sjbengineering.com/hightemp.html.
- Evans RW, Wilshire B. Introduction to creep. Institute of Materials; London, UK. 1993.
- Mehmanparast A, Davies CM, Dean DW, et al. The influence of pre-compression on the creep deformation and failure behaviour of type 316H stainless steel. Eng Fract Mech. 2013;110:52–67. doi: 10.1016/j.engfracmech.2013.08.006