442
Views
4
CrossRef citations to date
0
Altmetric
Research Article

Investigation on rheological characteristics of low-emissions crumb rubber modified asphalt

, , , , &
Article: 2164891 | Received 06 May 2022, Accepted 30 Dec 2022, Published online: 02 Feb 2023

References

  • Ameli, A., et al., 2016. Laboratory evaluation of the effect of reclaimed asphalt pavement on rutting performance of rubberized asphalt mixtures. Petroleum Science and Technology, 34 (5), 449–453.
  • Aoudia, K., et al., 2017. Recycling of waste tire rubber: microwave devulcanization and incorporation in a thermoset resin. Waste Management, 60, 471–481.
  • Cao, L., et al., 2021. Flue gas composition of waste rubber modified asphalt (WRMA) and effect of deodorants on hazardous constituents and WRMA. Journal of Hazardous Materials, 403, 123814.
  • Chen, T., et al., 2019a. The performance of hot-recycling asphalt binder containing crumb rubber modified asphalt based on physiochemical and rheological measurements. Construction and Building Materials, 226, 83–93.
  • Chen, Z., et al., 2019b. High temperature rheological characteristics of activated crumb rubber modified asphalts. Construction and Building Materials, 194, 122–131.
  • Chen, Z., et al., 2019c. Low temperature and fatigue characteristics of treated crumb rubber modified asphalt after a long term aging procedure. Journal of Cleaner Production, 234, 1262–1274.
  • Chen, Z., et al., 2021. Improvement of thermal and optical responses of short-term aged thermochromic asphalt binder by warm-mix asphalt technology. Journal of Cleaner Production, 279, 123675.
  • Cui, P., et al., 2021. Environmental performance and functional analysis of chip seals with recycled basic oxygen furnace slag as aggregate. Journal of Hazardous Materials, 405, 124441.
  • Duan, H., et al., 2021. Effect of crumb rubber percentages and bitumen sources on high-temperature rheological properties of less smell crumb rubber modified bitumen. Construction and Building Materials, 277, 122248.
  • Feng, Z., et al., 2016. Performance evaluation of bitumen modified with pyrolysis carbon black made from waste tyres. Construction and Building Materials, 111, 495–501.
  • Hosseinnezhad, S., et al., 2019. Surface functionalization of rubber particles to reduce phase separation in rubberized asphalt for sustainable construction. Journal of Cleaner Production, 225, 82–89.
  • Ibrahim, M.R., et al., 2013. A review on the effect of crumb rubber addition to the rheology of crumb rubber modified bitumen. Advances in Materials Science and Engineering, 2013, 415246.
  • Kabir, S.F., et al., 2020. Selective adsorption of bio-oils’ molecules onto rubber surface and its effects on stability of rubberized asphalt. Journal of Cleaner Production, 252, 119856.
  • Kheradmand, B., et al., 2014. An overview of the emerging warm mix asphalt technology. International Journal of Pavement Engineering, 15 (1), 79–94.
  • Leng, Z., et al., 2017. Optimizing the mixing procedure of warm asphalt rubber with wax-based additives through mechanism investigation and performance characterization. Construction and Building Materials, 144, 291–299.
  • Li, P., et al., 2018. Analysis of viscosity and composition properties for crumb rubber modified asphalt. Construction and Building Materials, 169, 638–647.
  • Li, J., et al., 2020. High temperature rheological characteristics of plasma-treated crumb rubber modified binders. Construction and Building Materials, 236, 117614.
  • Li, J., et al., 2021a. Surface activation of scrap tire crumb rubber to improve compatibility of rubberized asphalt. Resources, Conservation and Recycling, 169, 105518.
  • Li, X., et al., 2021b. High-temperature creep and low-temperature relaxation of recycled asphalt mixtures: Evaluation and balanced mix design. Construction and Building Materials, 310, 125222.
  • Liang, M., et al., 2015. Investigation of the rheological properties and storage stability of CR/SBS modified asphalt. Construction and Building Materials, 74, 235–240.
  • Liang, M., et al., 2017. Characterization of fume composition and rheological properties of asphalt with crumb rubber activated by microwave and TOR. Construction and Building Materials, 154, 310–322.
  • Liu, J., et al., 2019. Evaluation of the characteristics of trinidad lake asphalt and styrene-butadiene-rubber compound modified binder. Construction and Building Materials, 202, 614–621.
  • Lo Presti, D., 2013. Recycled Tyre Rubber Modified Bitumens for road asphalt mixtures: A literature review. Construction and Building Materials, 49, 863–881.
  • Luo, H., et al., 2020. Low-temperature cracking resistance, fatigue performance and emission reduction of a novel silica gel warm mix asphalt binder. Construction and Building Materials, 231, 117118.
  • Mohamed, E.I., et al., 2019. Volatile organic compounds of biofluids for detecting lung cancer by an electronic nose based on artificial neural network. Journal of Applied Biomedicine, 17, 67.
  • Perng, C., et al., 2011. Ozonation of odorous compounds in gases emitted from rubber processing industries. Aerosol and Air Quality Research, 11 (1), 51–58.
  • Qian, C., et al., 2020. Influence of crumb rubber particle size and SBS structure on properties of CR/SBS composite modified asphalt. Construction and Building Materials, 235, 117517.
  • Ragab, M., et al., 2013. Performance enhancement of crumb rubber–modified asphalts through control of the developed internal network structure. Transportation Research Record: Journal of the Transportation Research Board, 2371 (1), 96–104.
  • Ragab, M., and Abdelrahman, M., 2018. Enhancing the crumb rubber modified asphalt’s storage stability through the control of its internal network structure. International Journal of Pavement Research and Technology, 11 (1), 13–27.
  • Rubio, M.C., et al., 2012. Warm mix asphalt: an overview. Journal of Cleaner Production, 24, 76–84.
  • Shatanawi, K.M., et al., 2012. Effects of furfural activated crumb rubber on the properties of rubberized asphalt. Construction and Building Materials, 28 (1), 96–103.
  • Shu, B., et al., 2017. The utilization of multiple-walled carbon nanotubes in polymer modified bitumen. Materials, 10 (4), 416.
  • Singh, S.K., et al., 2018. Thermal degradation of SBS in bitumen during storage: influence of temperature, SBS concentration, polymer type and base bitumen. Polymer Degradation and Stability, 147, 64–75.
  • Sorsa, M., et al., 1983. Genotoxic hazards in the rubber industry. Scandinavian Journal of Work, Environment & Health, 9(2), 103–107.
  • Wang, J.Y., et al., 2018a. Performance investigation and sustainability evaluation of multiple-polymer asphalt mixtures in airfield pavement. Journal of Cleaner Production, 189, 67–77.
  • Wang, T., et al., 2018b. Energy consumption and environmental impact of rubberized asphalt pavement. Journal of Cleaner Production, 180, 139–158.
  • Wang, J., et al., 2020a. Performance evaluation of desulfurized rubber asphalt based on rheological and environmental effects. Journal of Materials in Civil Engineering, 32 (1) 04019330.
  • Wang, Q.-Z., et al., 2020b. Waste tire recycling assessment: Road application potential and carbon emissions reduction analysis of crumb rubber modified asphalt in China. Journal of Cleaner Production, 249, 119411.
  • Wang, M., et al., 2021. An overview of studies on the hazards, component analysis and suppression of fumes in asphalt and asphalt mixtures. Construction and Building Materials, 289, 123185.
  • Xia, T., et al., 2016. Viscoelastic phase behavior in SBS modified bitumen studied by morphology evolution and viscoelasticity change. Construction and Building Materials, 105, 589–594.
  • Xu, O., et al., 2016. High temperature rheological properties of crumb rubber modified asphalt binders with various modifiers. Construction and Building Materials, 112, 49–58.
  • Yan, C., et al., 2020. Characterizing the SBS polymer degradation within high content polymer modified asphalt using ATR-FTIR. Construction and Building Materials, 233, 117708.
  • Yang, X., et al., 2017. Environmental and mechanical performance of crumb rubber modified warm mix asphalt using Evotherm. Journal of Cleaner Production, 159, 346–358.
  • Yang, X., et al., 2020. Effect of microwave-activated crumb rubber on reaction mechanism, rheological properties, thermal stability, and released volatiles of asphalt binder. Journal of Cleaner Production, 248, 119230.
  • Yang, X., et al., 2022. Review of fume-generation mechanism, test methods, and fume suppressants of asphalt materials. Journal of Cleaner Production, 347, 131240.
  • Yin, L., et al., 2021. Mechanical properties and reaction mechanism of microwave-activated crumb rubber-modified asphalt before and after thermal aging. Construction and Building Materials, 267, 120773.
  • Yu, G.-X., et al., 2011. Crumb rubber–modified asphalt: microwave treatment effects. Petroleum Science and Technology, 29 (4), 411–417.
  • Zhang, H., et al., 2018a. Evaluation of aging behaviors of asphalt binders through different rheological indices. Fuel, 221, 78–88.
  • Zhang, H., et al., 2018b. Physical, rheological and chemical characterization of aging behaviors of thermochromic asphalt binder. Fuel, 211, 850–858.
  • Zhang, K., et al., 2020. Performance evaluation of new warm mix asphalt and water stability of its mixture based on laboratory tests. Construction and Building Materials, 241, 118017.
  • Zhang, H., et al., 2021. Mini-Review on the application of nanomaterials in improving anti-aging properties of asphalt. Energy & Fuels, 35 (14), 11017–11036.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.