Monte Carlo simulations of deformation behaviour of unbound granular materials based on a real aggregate library

References

• Adu-Osei, A., Little, D. N., and Lytton, R. L, 2001. Cross-anisotropic characterization of unbound granular materials. Transportation Research Record, 1757 (1), 82–91.
   Google Scholar
• Al-Qadi, I. L., Wang, H., and Tutumluer, E, 2010. Dynamic analysis of thin asphalt pavements by using cross-anisotropic stress-dependent properties for granular layer. Transportation Research Record, 2154 (1), 156–163.
   Google Scholar
• Alnedawi, A., Nepal, K. P., and Al-Ameri, R, 2021. Effect of loading frequencies on permanent deformation of unbound granular materials. International Journal of Pavement Engineering, 22 (8), 1008–1016.
   Web of Science ®Google Scholar
• Byun, Y.-H., et al., 2020. Aggregate properties affecting shear strength and permanent deformation characteristics of unbound–base course materials. Journal of Materials in Civil Engineering, 32 (1), 04019332.
   Web of Science ®Google Scholar
• Chen, S., et al., 2021. Influence of air void structures on the coefficient of permeability of asphalt mixtures. Powder Technology, 377, 1–9.
   Web of Science ®Google Scholar
• Chen, C., Ge, L., and Zhang, J, 2010. Modeling permanent deformation of unbound granular materials under repeated loads. International Journal of Geomechanics, 10 (6), 236–241.
   Web of Science ®Google Scholar
• Coli, N., et al., 2012. The contribution of geostatistics to the characterisation of some bimrock properties. Engineering Geology, 137, 53–63.
   Web of Science ®Google Scholar
• Cook, C. S., Tanyu, B. F., and Yavuz, A. B, 2017. Effect of particle shape on durability and performance of unbound aggregate base. Journal of Materials in Civil Engineering, 29 (2), 04016221.
   Web of Science ®Google Scholar
• Gong, F., et al., 2017. Mineral aggregate morphological evaluation with MATLAB Fourier radial gradient transform analysis. Journal of Testing and Evaluation, 45 (1), 268–280.
   Web of Science ®Google Scholar
• Hardy, M., and Cebon, D, 1994. Importance of speed and frequency in flexible pavement response. Journal of Engineering Mechanics, 120 (3), 463–482.
   Web of Science ®Google Scholar
• Hussain, J., et al., 2014. Comparing results between the repeated load triaxial test and accelerated pavement test on unbound aggregate. Journal of Materials in Civil Engineering, 26 (3), 476–483.
   Web of Science ®Google Scholar
• Jin, C., et al., 2020. Aggregate representation approach in 3D discrete-element modeling supporting adaptive shape and mass property fitting of realistic aggregates. Journal of Engineering Mechanics, 146 (6), 04020042.
   Web of Science ®Google Scholar
• Jin, C., et al., 2021. 3-D virtual design and microstructural modeling of asphalt mixture based on a digital aggregate library. Computers & Structures, 242, 106378.
   Web of Science ®Google Scholar
• Jing, G., et al., 2020. Experimental and numerical study on ballast flakiness and elongation index by direct shear test. International Journal of Geomechanics, 20 (10), 04020169.
   Web of Science ®Google Scholar
• Lekarp, F., and Isacsson, U, 2001. The effects of grading scale on repeated load triaxial test results. International Journal of Pavement Engineering, 2 (2), 85–101.
   Google Scholar
• Lekarp, F., Isacsson, U., and Dawson, A, 2000. State of the art. II: permanent strain response of unbound aggregates. Journal of Transportation Engineering, 126 (1), 76–83.
   Web of Science ®Google Scholar
• Li, J., et al., 2019. Three-dimensional simulation of aggregate and asphalt mixture using parameterized shape and size gradation. Journal of Materials in Civil Engineering, 31 (3), 04019004.
   Web of Science ®Google Scholar
• Li, J., et al., 2022. Evaluation on deformation behavior of granular base material during repeated load triaxial testing by discrete-element method. International Journal of Geomechanics, 22 (11), 04022210.
   Web of Science ®Google Scholar
• Li, P., Ding, Z., and Rao, W, 2016. Evaluation of deformation properties of asphalt mixture using aggregate slip test. International Journal of Pavement Engineering, 17 (6), 542–549.
   Web of Science ®Google Scholar
• Liu, Y., et al., 2017. Discrete element modeling of realistic particle shapes in stone-based mixtures through MATLAB-based imaging process. Construction and Building Materials, 143, 169–178.
   Web of Science ®Google Scholar
• Lu, C., et al., 2021. Resilient and permanent deformation behaviors of construction and demolition wastes in unbound pavement base and subbase applications. Transportation Geotechnics, 28, 100541.
   Web of Science ®Google Scholar
• Ma, T., et al., 2017. Heterogeneity effect of mechanical property on creep behavior of asphalt mixture based on micromechanical modeling and virtual creep test. Mechanics of Materials, 104, 49–59.
   Web of Science ®Google Scholar
• Mahmoud, E., et al., 2010. Comprehensive evaluation of AIMS texture, angularity, and dimension measurements. Journal of Materials in Civil Engineering, 22 (4), 369–379.
   Web of Science ®Google Scholar
• Medley, E. W, 1994. The engineering characterization of melanges and similar block-in-matrix rocks (bimrocks). Berkeley: University of California.
   Google Scholar
• Minh, N., and Cheng, Y, 2013. A DEM investigation of the effect of particle-size distribution on one-dimensional compression. Géotechnique, 63 (1), 44–53.
   Web of Science ®Google Scholar
• Mohammad, L. N., et al., 2006. Laboratory evaluation of untreated and treated pavement base materials: repeated load permanent deformation test. Transportation Research Record, 1967 (1), 78–88.
   Google Scholar
• Pouranian, M. R., Shishehbor, M., and Haddock, J. E, 2020. Impact of the coarse aggregate shape parameters on compaction characteristics of asphalt mixtures. Powder Technology, 363, 369–386.
   Web of Science ®Google Scholar
• Qian, G., et al., 2020. Compaction process tracking for asphalt mixture using discrete element method. Construction and Building Materials, 235, 117478.
   Web of Science ®Google Scholar
• Rajan, B., and Singh, D, 2020. Investigation on effects of different crushing stages on morphology of coarse and fine aggregates. International Journal of Pavement Engineering, 21 (2), 177–195.
   Web of Science ®Google Scholar
• Rezaei, A., and Masad, E, 2013. Experimental-based model for predicting the skid resistance of asphalt pavements. International Journal of Pavement Engineering, 14 (1), 24–35.
   Web of Science ®Google Scholar
• Tahmasebi, P., and Sahimi, M, 2018. A stochastic multiscale algorithm for modeling complex granular materials. Granular Matter, 20 (3), 1–19.
   Web of Science ®Google Scholar
• Tutumluer, E., and Thompson, M. R, 1997. Anisotropic modeling of granular bases in flexible pavements. Transportation Research Record, 1577 (1), 18–26.
   Google Scholar
• Venkatesh, N., Heeralal, M., and Pillai, R. J, 2020. Resilient and permanent deformation behaviour of clayey subgrade soil subjected to repeated load triaxial tests. European Journal of Environmental and Civil Engineering, 24 (9), 1414–1429.
   Web of Science ®Google Scholar
• Wang, H., et al., 2014. Three-dimensional modeling and simulation of asphalt concrete mixtures based on X-ray CT microstructure images. Journal of Traffic and Transportation Engineering (English Edition), 1 (1), 55–61.
   Google Scholar
• Wang, X., et al., 2015. Monte Carlo simulations of mesoscale fracture modelling of concrete with random aggregates and pores. Construction and Building Materials, 75, 35–45.
   Web of Science ®Google Scholar
• Wang, X., et al., 2019a. Random generation of convex granule packing based on weighted voronoi tessellation and cubic-polynomial-curve fitting. Computers and Geotechnics, 113, 103088.
   Web of Science ®Google Scholar
• Wang, X., et al., 2019b. Stochastic numerical model of stone-based materials with realistic stone-inclusion features. Construction and Building Materials, 197, 830–848.
   Web of Science ®Google Scholar
• Wang, X., et al., 2021a. Random generation of convex aggregates for DEM study of particle shape effect. Construction and Building Materials, 268, 121468.
   Web of Science ®Google Scholar
• Wang, X., et al., 2021b. Three-dimensional reconstruction of realistic stone-based materials with controllable stone inclusion geometries. Construction and Building Materials, 305, 124240.
   Web of Science ®Google Scholar
• Wang, X., et al., 2021. A spherical-harmonic-based approach to discrete element modeling of 3D irregular particles. International Journal for Numerical Methods in Engineering, 122 (20), 5626–5655.
   Web of Science ®Google Scholar
• Wang, X., et al., 2022. A novel approach of random packing generation of complex-shaped 3D particles with controllable sizes and shapes. Acta Geotechnica, 17 (2), 355–376.
   Web of Science ®Google Scholar
• Wang, L., et al., 2022. Review of visualization technique and its application of road aggregates based on morphological features. Applied Sciences, 12, 10571.
   Google Scholar
• Wei, H., et al., 2021. Numerical investigation on fracture evolution of asphalt mixture compared with acoustic emission. International Journal of Pavement Engineering, 1–11.
   Web of Science ®Google Scholar
• Yang, X., et al., 2016. Review on heterogeneous model reconstruction of stone-based composites in numerical simulation. Construction and Building Materials, 117, 229–243.
   Web of Science ®Google Scholar
• Yang, X., et al., 2018. Aggregate morphology and internal structure for asphalt concrete: prestep of computer-generated microstructural models. International Journal of Geomechanics, 18 (10), 06018024.
   Web of Science ®Google Scholar
• Yao, Y., et al., 2021. Effect of coarse recycled aggregate on failure strength for asphalt mixture using experimental and dem method. Coatings, 11 (10), 1234.
   Web of Science ®Google Scholar
• Yao, Y., et al., 2022. Effects of gravel content and shape on shear behaviour of soil-rock mixture: experiment and DEM modelling. Computers and Geotechnics, 141, 104476.
   Web of Science ®Google Scholar
• Yu, Y., Zheng, Y., and Zhao, X.-Y, 2021. Mesoscale modeling of recycled aggregate concrete under uniaxial compression and tension using discrete element method. Construction and Building Materials, 268, 121116.
   Web of Science ®Google Scholar
• Zeghal, M, 2004. Discrete-element method investigation of the resilient behavior of granular materials. Journal of Transportation Engineering, 130 (4), 503–509.
   Web of Science ®Google Scholar
• Zhang, J., et al., 2018. Geometric anisotropy modeling and shear behavior evaluation of graded crushed rocks. Construction and Building Materials, 183, 346–355.
   Web of Science ®Google Scholar
• Zhang, S., et al., 2021. Quantifying the effects of elongation and flatness on the shear behavior of realistic 3D rock aggregates based on DEM modeling. Advanced Powder Technology, 32 (5), 1318–1332.
   Web of Science ®Google Scholar
• Zhang, J., et al., 2022. Prediction of permanent deformation for subgrade soils under traffic loading in southern China. International Journal of Pavement Engineering, 23 (3), 673–682.
   Web of Science ®Google Scholar
• Zhang, D., Huang, X., and Zhao, Y, 2012. Investigation of the shape, size, angularity and surface texture properties of coarse aggregates. Construction and Building Materials, 34, 330–336.
   Web of Science ®Google Scholar
• Zhao, L., et al., 2020. 3D shape quantification and random packing simulation of rock aggregates using photogrammetry-based reconstruction and discrete element method. Construction and Building Materials, 262, 119986.
   Web of Science ®Google Scholar
• Zhao, B., and Wang, J, 2016. 3D quantitative shape analysis on form, roundness, and compactness with μCT. Powder Technology, 291, 262–275.
   Web of Science ®Google Scholar
• Zhou, Y., Jin, H., and Wang, B, 2019. Modeling and mechanical influence of meso-scale concrete considering actual aggregate shapes. Construction and Building Materials, 228, 116785.
   Web of Science ®Google Scholar