Comparison of hydrated lime, paraffin wax and low-density polyethylene modified bituminous binders: a perspective of adhesion and moisture damage

References

• Ahmad, Malik Farooq, et al., 2021. Assessment of sugar cane bagasse bio-oil as an environmental friendly alternative for pavement engineering applications. International Journal of Pavement Engineering, 23, 1–12.
   Web of Science ®Google Scholar
• Airey, G. D, 2015. The influence of aggregate, filler and bitumen on asphalt mixture moisture damage. Construction and Building Materials, 22 (2008), 2015–2024. doi:10.1016/j.conbuildmat.2007.07.009.
   Google Scholar
• ASTM, 2006. ASTM D 36. Standard test method for softening point of bitumen. West Conshohocken, PA: ASTM International. 1 (d): 3–6. doi:10.1520/D0061-75R10.2.
   Google Scholar
• ASTM, D5, 2013. Standard test method for penetration of bituminous materials. ASTM International.
   Google Scholar
• ASTM Standard, 2009. Standard test method for pull-off strength of coatings using portable adhesion testers (ASTM D4541). West Conshohocken, PA: ASTM International.
   Google Scholar
• Autelitano, Federico, Bianchi, Federica, and Giuliani, Felice, 2017. Airborne emissions of asphalt / wax blends for warm mix asphalt production. Journal of Cleaner Production, 164, 749–756. doi:10.1016/j.jclepro.2017.06.247.
   Web of Science ®Google Scholar
• Azam, Abdelhalim M., El-Badawy, Sherif M., and Alabasse, Rufak M., 2019. Evaluation of asphalt mixtures modified with polymer and wax. Innovative Infrastructure Solutions, 4 (1), 43.
   Web of Science ®Google Scholar
• Banja, Gustavo, 2018. Metallurgy and Materials, 71 (2), 225–233.
   Google Scholar
• BSI Standards Publication Bituminous Mixtures — Test Methods for Hot Mix Asphalt Part 11: Determination of the Affinity between Aggregate and Bitumen, 2012.
   Google Scholar
• Chaturabong, Preeda, and Bahia, Hussain U., 2018. Effect of moisture on the cohesion of asphalt mastics and bonding with surface of aggregates. Road Materials and Pavement Design, 19 (3), 741–753. doi:10.1080/14680629.2016.1267659.
   Web of Science ®Google Scholar
• Chen, Huaxin, et al., 2009. Evaluation and design of fiber-reinforced asphalt mixtures. Materials & Design, 30 (7), 2595–2603.
   Web of Science ®Google Scholar
• Choudhary, Jayvant, Kumar, Brind, and Gupta, Ankit, 2020. Effect of filler on the bitumen-aggregate adhesion in asphalt mix. International Journal of Pavement Engineering, 21 (12), 1482–1490.
   Web of Science ®Google Scholar
• Cihlářová, Denisa, et al., 2018. Use of adhesion promoters in asphalt mixtures. Slovak Journal of Civil Engineering, 26 (1), 19–24. doi:10.2478/sjce-2018-0003.
   Web of Science ®Google Scholar
• Cuadri, A. A., et al., 2015. Chemically modified bitumens with enhanced rheology and adhesion properties to siliceous aggregates. Construction and Building Materials, 93, 766–774. doi:10.1016/j.conbuildmat.2015.05.098.
   Web of Science ®Google Scholar
• Ehinola, Olugbenga A., Falode, Olugbenga A., and Jonathan, George, 2012. Softening point and penetration index of bitumen from parts of southwestern Nigeria. Nafta, 63 (9–10), 319–323.
   Google Scholar
• Fernandes, Francisco M., Fernandes, Andreia, and Pais, Jorge, 2017. Assessment of the density and moisture content of asphalt mixtures of road pavements. Construction and Building Materials, doi:10.1016/j.conbuildmat.2017.06.119.
   Web of Science ®Google Scholar
• Geckil, Tacettin, and Seloglu, Maksut, 2018. Performance properties of asphalt modified with reactive terpolymer. Construction and Building Materials, 173, 262–271. doi:10.1016/j.conbuildmat.2018.04.036.
   Web of Science ®Google Scholar
• Gorkem, Cagri, and Sengoz, Burak, 2009. Predicting stripping and moisture induced damage of asphalt concrete prepared with polymer modified bitumen and hydrated lime. Construction and Building Materials, 23 (6), 2227–2236. doi:10.1016/j.conbuildmat.2008.12.001.
   Web of Science ®Google Scholar
• Gudissa, Leta, et al., 2021. Suitability assessment of mesozoic limestone aggregates as pavement material in Harar-Dire Dawa Area, Eastern Ethiopia.
   Google Scholar
• Haider, Safeer, et al., 2020. A pure case study on moisture sensitivity assessment using tests on both loose and compacted asphalt mixture. Construction and Building Materials, 239, 117817.
   Web of Science ®Google Scholar
• Haider, Safeer, Hafeez, Imran, and Ullah, Rafi, 2020. Sustainable use of waste plastic modifiers to strengthen the adhesion properties of asphalt mixtures. Construction and Building Materials, 235, 117496.
   Web of Science ®Google Scholar
• Hamedi, Gh H., and Tahami, S. A., 2018. The effect of using anti-stripping additives on moisture damage of hot mix asphalt. International Journal of Adhesion and Adhesives, 81 (January 2018), 90–97. doi:10.1016/j.ijadhadh.2017.03.016.
   Google Scholar
• Hicks, Russell G, 1991. Moisture damage in asphalt concrete. Vol. 175. Washington, DC: Transportation Research Board.
   Google Scholar
• Huang, Wei, and Lv, Q., 2017. Investigation of critical factors determining the accuracy of binder bond strength test to evaluate adhesion properties of asphalt binders. Journal of Testing and Evaluation, 45 (4), 1270–1279.
   Web of Science ®Google Scholar
• Jahromi, Saeed Ghaffarpour, 2009. Estimation of resistance to moisture destruction in asphalt mixtures. Construction and Building Materials, 23 (6), 2324–2331. doi:10.1016/j.conbuildmat.2008.11.007.
   Web of Science ®Google Scholar
• Jameel, Muhammad Sohail, et al., 2021. Effect of aging on adhesion and moisture damage of asphalt: a perspective of rolling bottle and bitumen bond strength test. International Journal of Pavement Research and Technology, 15, 1–10.
   Google Scholar
• Kandhal, Prithvi S., and Rickards, Ian J., 2001. Premature failure of asphalt overlays from stripping: case histories. no. April.
   Google Scholar
• Kollaros, G., Kalaitzaki, E., and Athanasopoulou, A., 2017. Using hydrated lime in hot mix asphalt mixtures in road construction American journal of engineering research (AJER) open access using hydrated lime in hot mix asphalt mixtures in road construction. no. July: 261–66.
   Google Scholar
• Kringos, Nicole, and Scarpas, A, 2008. Physical and mechanical moisture susceptibility of asphaltic mixtures. International Journal of Solids and Structures, 45 (9), 2671–2685.
   Web of Science ®Google Scholar
• Lakshman Singh, Khwairakpam, and Panda, Debjani, 2019. Study on strength characteristics improvement of polyethylene modified bituminous concrete mixes. Key Engineering Materials, 803, 216–221. Trans Tech Publ.
   Google Scholar
• Lesueur, Didier, Petit, Joëlle, and Ritter, Hans-Josef, 2013. The mechanisms of hydrated lime modification of asphalt mixtures: a state-of-the-art review. Road Materials and Pavement Design, 14 (1), 1–16.
   Web of Science ®Google Scholar
• Liang, Ming, et al., 2020. Utilization of wax residue as compatibilizer for asphalt with ground tire rubber/recycled polyethylene blends. Construction and Building Materials, 230, 116966.
   Web of Science ®Google Scholar
• Little, Dallas N., and Jones, D. R., 2003. Chemical and mechanical processes of moisture damage in hot-mix asphalt pavements. National seminar on moisture sensitivity of asphalt pavements, 37–70.
   Google Scholar
• Liu, Yawen, et al., 2014. Examination of moisture sensitivity of aggregate-bitumen bonding strength using loose asphalt mixture and physico-chemical surface energy property tests. International Journal of Pavement Engineering, doi:10.1080/10298436.2013.855312.
   Web of Science ®Google Scholar
• Mansourian, Ahmad, and Gholamzadeh, Shahram, 2017. Moisture susceptibility of hot mix asphalt containing asphalt binder modified with nanocomposite. Road Materials and Pavement Design, 18 (6), 1434–1447. doi:10.1080/14680629.2016.1211961.
   Web of Science ®Google Scholar
• Molugaram, Kumar, and Rao, G. Shanker, 2017. ANOVA (analysis of variance). In: Statistical techniques for transportation engineering. Oxford: Butterworth-Heinemann, 451–462.
   Google Scholar
• Moraes, Raquel, Velasquez, Raul, and Bahia, Hussain U., 2011. Measuring the effect of moisture on asphalt – aggregate bond with the bitumen bond strength test. Transportation Research Record, 2209 (1), 70–81. doi:10.3141/2209-09.
   Web of Science ®Google Scholar
• Nabizadeh, Hesamaddin, 2015. Viscoelastic, fatigue damage, and permanent deformation characterization of high rap bituminous mixtures using fine aggregate matrix (FAM).
   Google Scholar
• Nisar, Muhammad Ahsan, et al., 2021. Performance evaluation of nano wood ashes in asphalt binder and mixture. International Journal of Pavement Engineering, 23, 1–15.
   Google Scholar
• Oroujzadeh, Nasrin, and Sabbagh, Hamid, 2017. Increasing the durability of asphalt mixture against moisture: a case study in Iran. 10 (June). doi:10.17485/ijst/2017/v10i24/112345.
   Google Scholar
• Saroufim, Edwina, Celauro, Clara, and Mistretta, Maria Chiara, 2018. A simple interpretation of the effect of the polymer type on the properties of PMBs for road paving applications. Construction and Building Materials, 158, 114–123. doi:10.1016/j.conbuildmat.2017.10.034.
   Web of Science ®Google Scholar
• Sengoz, Burak, and Isikyakar, Giray, 2008. Evaluation of the properties and microstructure of SBS and EVA polymer modified bitumen. Construction and Building Materials, 22 (9), 1897–1905.
   Web of Science ®Google Scholar
• Sharma, Sonu, Sharma, Sitansh, and Upadhyay, Niraj, 2019. Composition based physicochemical analysis of modified bitumen by high-density polyethylene (HDPE) and low-density polyethylene (LDPE). Oriental Journal of Chemistry, 35 (3), 1167–1173.
   Web of Science ®Google Scholar
• Smalheiser, Neil R., 2017. Data literacy. Amsterdam: Elsevier.
   Google Scholar
• Taherkhani, Hasan, and Tajdini, Milad, 2019. Comparing the effects of nano-silica and hydrated lime on the properties of asphalt concrete. Construction and Building Materials, 218, 308–315.
   Web of Science ®Google Scholar
• Thelen, Edmund, 1958. Surface energy and adhesion properties in asphalt-aggregate systems. Highway Research Board Bulletin, 192, 63–74.
   Google Scholar
• Tufail, M., et al., 1992. Natural radioactivity from the building materials used in Islamabad and Rawalpindi, Pakistan. Science of the Total Environment, 121, 283–291.
   Web of Science ®Google Scholar
• Villanueva, Aaron, Ho, Susanna, and Zanzotto, Ludo, 2008. Asphalt modification with used lubricating oil. Canadian Journal of Civil Engineering, 35, doi:10.1139/L07-092.
   Web of Science ®Google Scholar
• Xie, Jun, et al., 2014. Implementation of modified pull-off test by UTM to investigate bonding characteristics of bitumen and basic oxygen furnace slag (BOF). Construction and Building Materials, 57, 61–68. doi:10.1016/j.conbuildmat.2014.01.083.
   Web of Science ®Google Scholar
• Zaidi, Syed Bilal Ahmed, et al., 2019. Moisture susceptibility of hydrated lime modified mastics using adhesion test methods and surface free energy techniques. International Journal of Pavement Engineering, 22, 1–13.
   Web of Science ®Google Scholar
• Zaidi, Syed Bilal Ahmed, et al., 2022. Application of image analysis tools in matlab to better estimate the degree of binder coverage in rolling bottles test. Road Materials and Pavement Design, 23 (3), 601–616.
   Web of Science ®Google Scholar